1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768 |
- /*
- * Samsung S5P SoC camera interface driver header
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd
- * Author: Sylwester Nawrocki, <s.nawrocki@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #ifndef S5P_FIMC_H_
- #define S5P_FIMC_H_
- enum cam_bus_type {
- FIMC_ITU_601 = 1,
- FIMC_ITU_656,
- FIMC_MIPI_CSI2,
- FIMC_LCD_WB, /* FIFO link from LCD mixer */
- };
- struct i2c_board_info;
- /**
- * struct s5p_fimc_isp_info - image sensor information required for host
- * interace configuration.
- *
- * @board_info: pointer to I2C subdevice's board info
- * @clk_frequency: frequency of the clock the host interface provides to sensor
- * @bus_type: determines bus type, MIPI, ITU-R BT.601 etc.
- * @csi_data_align: MIPI-CSI interface data alignment in bits
- * @i2c_bus_num: i2c control bus id the sensor is attached to
- * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
- * @clk_id: index of the SoC peripheral clock for sensors
- * @flags: the parallel bus flags defining signals polarity (V4L2_MBUS_*)
- */
- struct s5p_fimc_isp_info {
- struct i2c_board_info *board_info;
- unsigned long clk_frequency;
- enum cam_bus_type bus_type;
- u16 csi_data_align;
- u16 i2c_bus_num;
- u16 mux_id;
- u16 flags;
- u8 clk_id;
- };
- /**
- * struct s5p_platform_fimc - camera host interface platform data
- *
- * @isp_info: properties of camera sensor required for host interface setup
- * @num_clients: the number of attached image sensors
- */
- struct s5p_platform_fimc {
- struct s5p_fimc_isp_info *isp_info;
- int num_clients;
- };
- /*
- * v4l2_device notification id. This is only for internal use in the kernel.
- * Sensor subdevs should issue S5P_FIMC_TX_END_NOTIFY notification in single
- * frame capture mode when there is only one VSYNC pulse issued by the sensor
- * at begining of the frame transmission.
- */
- #define S5P_FIMC_TX_END_NOTIFY _IO('e', 0)
- #endif /* S5P_FIMC_H_ */
|