| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185 |
- config FADS
- bool
- config CPM1
- bool
- select CPM
- choice
- prompt "8xx Machine Type"
- depends on PPC_8xx
- depends on 8xx
- default MPC885ADS
- config MPC8XXFADS
- bool "FADS"
- select FADS
- config MPC86XADS
- bool "MPC86XADS"
- select CPM1
- help
- MPC86x Application Development System by Freescale Semiconductor.
- The MPC86xADS is meant to serve as a platform for s/w and h/w
- development around the MPC86X processor families.
- config MPC885ADS
- bool "MPC885ADS"
- select CPM1
- select OF_DYNAMIC
- help
- Freescale Semiconductor MPC885 Application Development System (ADS).
- Also known as DUET.
- The MPC885ADS is meant to serve as a platform for s/w and h/w
- development around the MPC885 processor family.
- config PPC_EP88XC
- bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)"
- select CPM1
- help
- This enables support for the Embedded Planet EP88xC board.
- This board is also resold by Freescale as the QUICCStart
- MPC885 Evaluation System and/or the CWH-PPC-885XN-VE.
- config PPC_ADDER875
- bool "Analogue & Micro Adder 875"
- select CPM1
- select REDBOOT
- help
- This enables support for the Analogue & Micro Adder 875
- board.
- config TQM8XX
- bool "TQM8XX"
- select CPM1
- help
- support for the mpc8xx based boards from TQM.
- endchoice
- menu "Freescale Ethernet driver platform-specific options"
- depends on (FS_ENET && MPC885ADS)
- config MPC8xx_SECOND_ETH
- bool "Second Ethernet channel"
- depends on MPC885ADS
- default y
- help
- This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
- The latter will use SCC1, for 885ADS you can select it below.
- choice
- prompt "Second Ethernet channel"
- depends on MPC8xx_SECOND_ETH
- default MPC8xx_SECOND_ETH_FEC2
- config MPC8xx_SECOND_ETH_FEC2
- bool "FEC2"
- depends on MPC885ADS
- help
- Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
- (often 2-nd UART) will not work if this is enabled.
- config MPC8xx_SECOND_ETH_SCC3
- bool "SCC3"
- depends on MPC885ADS
- help
- Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
- (often 1-nd UART) will not work if this is enabled.
- endchoice
- endmenu
- #
- # MPC8xx Communication options
- #
- menu "MPC8xx CPM Options"
- depends on 8xx
- # This doesn't really belong here, but it is convenient to ask
- # 8xx specific questions.
- comment "Generic MPC8xx Options"
- config 8xx_COPYBACK
- bool "Copy-Back Data Cache (else Writethrough)"
- help
- Saying Y here will cause the cache on an MPC8xx processor to be used
- in Copy-Back mode. If you say N here, it is used in Writethrough
- mode.
- If in doubt, say Y here.
- config 8xx_GPIO
- bool "GPIO API Support"
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- help
- Saying Y here will cause the ports on an MPC8xx processor to be used
- with the GPIO API. If you say N here, the kernel needs less memory.
- If in doubt, say Y here.
- config 8xx_CPU6
- bool "CPU6 Silicon Errata (860 Pre Rev. C)"
- help
- MPC860 CPUs, prior to Rev C have some bugs in the silicon, which
- require workarounds for Linux (and most other OSes to work). If you
- get a BUG() very early in boot, this might fix the problem. For
- more details read the document entitled "MPC860 Family Device Errata
- Reference" on Freescale's website. This option also incurs a
- performance hit.
- If in doubt, say N here.
- config 8xx_CPU15
- bool "CPU15 Silicon Errata"
- default y
- help
- This enables a workaround for erratum CPU15 on MPC8xx chips.
- This bug can cause incorrect code execution under certain
- circumstances. This workaround adds some overhead (a TLB miss
- every time execution crosses a page boundary), and you may wish
- to disable it if you have worked around the bug in the compiler
- (by not placing conditional branches or branches to LR or CTR
- in the last word of a page, with a target of the last cache
- line in the next page), or if you have used some other
- workaround.
- If in doubt, say Y here.
- choice
- prompt "Microcode patch selection"
- default NO_UCODE_PATCH
- help
- Help not implemented yet, coming soon.
- config NO_UCODE_PATCH
- bool "None"
- config USB_SOF_UCODE_PATCH
- bool "USB SOF patch"
- help
- Help not implemented yet, coming soon.
- config I2C_SPI_UCODE_PATCH
- bool "I2C/SPI relocation patch"
- help
- Help not implemented yet, coming soon.
- config I2C_SPI_SMC1_UCODE_PATCH
- bool "I2C/SPI/SMC1 relocation patch"
- help
- Help not implemented yet, coming soon.
- endchoice
- config UCODE_PATCH
- bool
- default y
- depends on !NO_UCODE_PATCH
- endmenu
|
