ch341.c 17 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662
  1. /*
  2. * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
  3. * Copyright 2007, Werner Cornelius <werner@cornelius-consult.de>
  4. * Copyright 2009, Boris Hajduk <boris@hajduk.org>
  5. *
  6. * ch341.c implements a serial port driver for the Winchiphead CH341.
  7. *
  8. * The CH341 device can be used to implement an RS232 asynchronous
  9. * serial port, an IEEE-1284 parallel printer port or a memory-like
  10. * interface. In all cases the CH341 supports an I2C interface as well.
  11. * This driver only supports the asynchronous serial interface.
  12. *
  13. * This program is free software; you can redistribute it and/or
  14. * modify it under the terms of the GNU General Public License version
  15. * 2 as published by the Free Software Foundation.
  16. */
  17. #include <linux/kernel.h>
  18. #include <linux/init.h>
  19. #include <linux/tty.h>
  20. #include <linux/module.h>
  21. #include <linux/slab.h>
  22. #include <linux/usb.h>
  23. #include <linux/usb/serial.h>
  24. #include <linux/serial.h>
  25. #include <asm/unaligned.h>
  26. #define DEFAULT_BAUD_RATE 9600
  27. #define DEFAULT_TIMEOUT 1000
  28. /* flags for IO-Bits */
  29. #define CH341_BIT_RTS (1 << 6)
  30. #define CH341_BIT_DTR (1 << 5)
  31. /******************************/
  32. /* interrupt pipe definitions */
  33. /******************************/
  34. /* always 4 interrupt bytes */
  35. /* first irq byte normally 0x08 */
  36. /* second irq byte base 0x7d + below */
  37. /* third irq byte base 0x94 + below */
  38. /* fourth irq byte normally 0xee */
  39. /* second interrupt byte */
  40. #define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */
  41. /* status returned in third interrupt answer byte, inverted in data
  42. from irq */
  43. #define CH341_BIT_CTS 0x01
  44. #define CH341_BIT_DSR 0x02
  45. #define CH341_BIT_RI 0x04
  46. #define CH341_BIT_DCD 0x08
  47. #define CH341_BITS_MODEM_STAT 0x0f /* all bits */
  48. /*******************************/
  49. /* baudrate calculation factor */
  50. /*******************************/
  51. #define CH341_BAUDBASE_FACTOR 1532620800
  52. #define CH341_BAUDBASE_DIVMAX 3
  53. /* Break support - the information used to implement this was gleaned from
  54. * the Net/FreeBSD uchcom.c driver by Takanori Watanabe. Domo arigato.
  55. */
  56. #define CH341_REQ_WRITE_REG 0x9A
  57. #define CH341_REQ_READ_REG 0x95
  58. #define CH341_REG_BREAK1 0x05
  59. #define CH341_REG_BREAK2 0x18
  60. #define CH341_NBREAK_BITS_REG1 0x01
  61. #define CH341_NBREAK_BITS_REG2 0x40
  62. static bool debug;
  63. static const struct usb_device_id id_table[] = {
  64. { USB_DEVICE(0x4348, 0x5523) },
  65. { USB_DEVICE(0x1a86, 0x7523) },
  66. { USB_DEVICE(0x1a86, 0x5523) },
  67. { },
  68. };
  69. MODULE_DEVICE_TABLE(usb, id_table);
  70. struct ch341_private {
  71. spinlock_t lock; /* access lock */
  72. unsigned baud_rate; /* set baud rate */
  73. u8 line_control; /* set line control value RTS/DTR */
  74. u8 line_status; /* active status of modem control inputs */
  75. u8 multi_status_change; /* status changed multiple since last call */
  76. };
  77. static int ch341_control_out(struct usb_device *dev, u8 request,
  78. u16 value, u16 index)
  79. {
  80. int r;
  81. dbg("ch341_control_out(%02x,%02x,%04x,%04x)", USB_DIR_OUT|0x40,
  82. (int)request, (int)value, (int)index);
  83. r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
  84. USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
  85. value, index, NULL, 0, DEFAULT_TIMEOUT);
  86. return r;
  87. }
  88. static int ch341_control_in(struct usb_device *dev,
  89. u8 request, u16 value, u16 index,
  90. char *buf, unsigned bufsize)
  91. {
  92. int r;
  93. dbg("ch341_control_in(%02x,%02x,%04x,%04x,%pK,%u)", USB_DIR_IN|0x40,
  94. (int)request, (int)value, (int)index, buf, (int)bufsize);
  95. r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
  96. USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
  97. value, index, buf, bufsize, DEFAULT_TIMEOUT);
  98. return r;
  99. }
  100. static int ch341_set_baudrate(struct usb_device *dev,
  101. struct ch341_private *priv)
  102. {
  103. short a, b;
  104. int r;
  105. unsigned long factor;
  106. short divisor;
  107. dbg("ch341_set_baudrate(%d)", priv->baud_rate);
  108. if (!priv->baud_rate)
  109. return -EINVAL;
  110. factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate);
  111. divisor = CH341_BAUDBASE_DIVMAX;
  112. while ((factor > 0xfff0) && divisor) {
  113. factor >>= 3;
  114. divisor--;
  115. }
  116. if (factor > 0xfff0)
  117. return -EINVAL;
  118. factor = 0x10000 - factor;
  119. a = (factor & 0xff00) | divisor;
  120. b = factor & 0xff;
  121. r = ch341_control_out(dev, 0x9a, 0x1312, a);
  122. if (!r)
  123. r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
  124. return r;
  125. }
  126. static int ch341_set_handshake(struct usb_device *dev, u8 control)
  127. {
  128. dbg("ch341_set_handshake(0x%02x)", control);
  129. return ch341_control_out(dev, 0xa4, ~control, 0);
  130. }
  131. static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
  132. {
  133. char *buffer;
  134. int r;
  135. const unsigned size = 8;
  136. unsigned long flags;
  137. dbg("ch341_get_status()");
  138. buffer = kmalloc(size, GFP_KERNEL);
  139. if (!buffer)
  140. return -ENOMEM;
  141. r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size);
  142. if (r < 0)
  143. goto out;
  144. /* setup the private status if available */
  145. if (r == 2) {
  146. r = 0;
  147. spin_lock_irqsave(&priv->lock, flags);
  148. priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
  149. priv->multi_status_change = 0;
  150. spin_unlock_irqrestore(&priv->lock, flags);
  151. } else
  152. r = -EPROTO;
  153. out: kfree(buffer);
  154. return r;
  155. }
  156. /* -------------------------------------------------------------------------- */
  157. static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
  158. {
  159. char *buffer;
  160. int r;
  161. const unsigned size = 8;
  162. dbg("ch341_configure()");
  163. buffer = kmalloc(size, GFP_KERNEL);
  164. if (!buffer)
  165. return -ENOMEM;
  166. /* expect two bytes 0x27 0x00 */
  167. r = ch341_control_in(dev, 0x5f, 0, 0, buffer, size);
  168. if (r < 0)
  169. goto out;
  170. r = ch341_control_out(dev, 0xa1, 0, 0);
  171. if (r < 0)
  172. goto out;
  173. r = ch341_set_baudrate(dev, priv);
  174. if (r < 0)
  175. goto out;
  176. /* expect two bytes 0x56 0x00 */
  177. r = ch341_control_in(dev, 0x95, 0x2518, 0, buffer, size);
  178. if (r < 0)
  179. goto out;
  180. r = ch341_control_out(dev, 0x9a, 0x2518, 0x0050);
  181. if (r < 0)
  182. goto out;
  183. /* expect 0xff 0xee */
  184. r = ch341_get_status(dev, priv);
  185. if (r < 0)
  186. goto out;
  187. r = ch341_control_out(dev, 0xa1, 0x501f, 0xd90a);
  188. if (r < 0)
  189. goto out;
  190. r = ch341_set_baudrate(dev, priv);
  191. if (r < 0)
  192. goto out;
  193. r = ch341_set_handshake(dev, priv->line_control);
  194. if (r < 0)
  195. goto out;
  196. /* expect 0x9f 0xee */
  197. r = ch341_get_status(dev, priv);
  198. out: kfree(buffer);
  199. return r;
  200. }
  201. /* allocate private data */
  202. static int ch341_attach(struct usb_serial *serial)
  203. {
  204. struct ch341_private *priv;
  205. int r;
  206. dbg("ch341_attach()");
  207. /* private data */
  208. priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
  209. if (!priv)
  210. return -ENOMEM;
  211. spin_lock_init(&priv->lock);
  212. priv->baud_rate = DEFAULT_BAUD_RATE;
  213. priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
  214. r = ch341_configure(serial->dev, priv);
  215. if (r < 0)
  216. goto error;
  217. usb_set_serial_port_data(serial->port[0], priv);
  218. return 0;
  219. error: kfree(priv);
  220. return r;
  221. }
  222. static int ch341_carrier_raised(struct usb_serial_port *port)
  223. {
  224. struct ch341_private *priv = usb_get_serial_port_data(port);
  225. if (priv->line_status & CH341_BIT_DCD)
  226. return 1;
  227. return 0;
  228. }
  229. static void ch341_dtr_rts(struct usb_serial_port *port, int on)
  230. {
  231. struct ch341_private *priv = usb_get_serial_port_data(port);
  232. unsigned long flags;
  233. dbg("%s - port %d", __func__, port->number);
  234. /* drop DTR and RTS */
  235. spin_lock_irqsave(&priv->lock, flags);
  236. if (on)
  237. priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR;
  238. else
  239. priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
  240. spin_unlock_irqrestore(&priv->lock, flags);
  241. ch341_set_handshake(port->serial->dev, priv->line_control);
  242. wake_up_interruptible(&port->delta_msr_wait);
  243. }
  244. static void ch341_close(struct usb_serial_port *port)
  245. {
  246. dbg("%s - port %d", __func__, port->number);
  247. usb_serial_generic_close(port);
  248. usb_kill_urb(port->interrupt_in_urb);
  249. }
  250. /* open this device, set default parameters */
  251. static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
  252. {
  253. struct usb_serial *serial = port->serial;
  254. struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
  255. int r;
  256. dbg("ch341_open()");
  257. priv->baud_rate = DEFAULT_BAUD_RATE;
  258. r = ch341_configure(serial->dev, priv);
  259. if (r)
  260. goto out;
  261. r = ch341_set_handshake(serial->dev, priv->line_control);
  262. if (r)
  263. goto out;
  264. r = ch341_set_baudrate(serial->dev, priv);
  265. if (r)
  266. goto out;
  267. dbg("%s - submitting interrupt urb", __func__);
  268. r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
  269. if (r) {
  270. dev_err(&port->dev, "%s - failed submitting interrupt urb,"
  271. " error %d\n", __func__, r);
  272. ch341_close(port);
  273. goto out;
  274. }
  275. r = usb_serial_generic_open(tty, port);
  276. out: return r;
  277. }
  278. /* Old_termios contains the original termios settings and
  279. * tty->termios contains the new setting to be used.
  280. */
  281. static void ch341_set_termios(struct tty_struct *tty,
  282. struct usb_serial_port *port, struct ktermios *old_termios)
  283. {
  284. struct ch341_private *priv = usb_get_serial_port_data(port);
  285. unsigned baud_rate;
  286. unsigned long flags;
  287. dbg("ch341_set_termios()");
  288. baud_rate = tty_get_baud_rate(tty);
  289. priv->baud_rate = baud_rate;
  290. if (baud_rate) {
  291. spin_lock_irqsave(&priv->lock, flags);
  292. priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
  293. spin_unlock_irqrestore(&priv->lock, flags);
  294. ch341_set_baudrate(port->serial->dev, priv);
  295. } else {
  296. spin_lock_irqsave(&priv->lock, flags);
  297. priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
  298. spin_unlock_irqrestore(&priv->lock, flags);
  299. }
  300. ch341_set_handshake(port->serial->dev, priv->line_control);
  301. /* Unimplemented:
  302. * (cflag & CSIZE) : data bits [5, 8]
  303. * (cflag & PARENB) : parity {NONE, EVEN, ODD}
  304. * (cflag & CSTOPB) : stop bits [1, 2]
  305. */
  306. }
  307. static void ch341_break_ctl(struct tty_struct *tty, int break_state)
  308. {
  309. const uint16_t ch341_break_reg =
  310. CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8);
  311. struct usb_serial_port *port = tty->driver_data;
  312. int r;
  313. uint16_t reg_contents;
  314. uint8_t *break_reg;
  315. dbg("%s()", __func__);
  316. break_reg = kmalloc(2, GFP_KERNEL);
  317. if (!break_reg) {
  318. dev_err(&port->dev, "%s - kmalloc failed\n", __func__);
  319. return;
  320. }
  321. r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG,
  322. ch341_break_reg, 0, break_reg, 2);
  323. if (r < 0) {
  324. dev_err(&port->dev, "%s - USB control read error (%d)\n",
  325. __func__, r);
  326. goto out;
  327. }
  328. dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x",
  329. __func__, break_reg[0], break_reg[1]);
  330. if (break_state != 0) {
  331. dbg("%s - Enter break state requested", __func__);
  332. break_reg[0] &= ~CH341_NBREAK_BITS_REG1;
  333. break_reg[1] &= ~CH341_NBREAK_BITS_REG2;
  334. } else {
  335. dbg("%s - Leave break state requested", __func__);
  336. break_reg[0] |= CH341_NBREAK_BITS_REG1;
  337. break_reg[1] |= CH341_NBREAK_BITS_REG2;
  338. }
  339. dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x",
  340. __func__, break_reg[0], break_reg[1]);
  341. reg_contents = get_unaligned_le16(break_reg);
  342. r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
  343. ch341_break_reg, reg_contents);
  344. if (r < 0)
  345. dev_err(&port->dev, "%s - USB control write error (%d)\n",
  346. __func__, r);
  347. out:
  348. kfree(break_reg);
  349. }
  350. static int ch341_tiocmset(struct tty_struct *tty,
  351. unsigned int set, unsigned int clear)
  352. {
  353. struct usb_serial_port *port = tty->driver_data;
  354. struct ch341_private *priv = usb_get_serial_port_data(port);
  355. unsigned long flags;
  356. u8 control;
  357. spin_lock_irqsave(&priv->lock, flags);
  358. if (set & TIOCM_RTS)
  359. priv->line_control |= CH341_BIT_RTS;
  360. if (set & TIOCM_DTR)
  361. priv->line_control |= CH341_BIT_DTR;
  362. if (clear & TIOCM_RTS)
  363. priv->line_control &= ~CH341_BIT_RTS;
  364. if (clear & TIOCM_DTR)
  365. priv->line_control &= ~CH341_BIT_DTR;
  366. control = priv->line_control;
  367. spin_unlock_irqrestore(&priv->lock, flags);
  368. return ch341_set_handshake(port->serial->dev, control);
  369. }
  370. static void ch341_read_int_callback(struct urb *urb)
  371. {
  372. struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
  373. unsigned char *data = urb->transfer_buffer;
  374. unsigned int actual_length = urb->actual_length;
  375. int status;
  376. dbg("%s (%d)", __func__, port->number);
  377. switch (urb->status) {
  378. case 0:
  379. /* success */
  380. break;
  381. case -ECONNRESET:
  382. case -ENOENT:
  383. case -ESHUTDOWN:
  384. /* this urb is terminated, clean up */
  385. dbg("%s - urb shutting down with status: %d", __func__,
  386. urb->status);
  387. return;
  388. default:
  389. dbg("%s - nonzero urb status received: %d", __func__,
  390. urb->status);
  391. goto exit;
  392. }
  393. usb_serial_debug_data(debug, &port->dev, __func__,
  394. urb->actual_length, urb->transfer_buffer);
  395. if (actual_length >= 4) {
  396. struct ch341_private *priv = usb_get_serial_port_data(port);
  397. unsigned long flags;
  398. u8 prev_line_status = priv->line_status;
  399. spin_lock_irqsave(&priv->lock, flags);
  400. priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
  401. if ((data[1] & CH341_MULT_STAT))
  402. priv->multi_status_change = 1;
  403. spin_unlock_irqrestore(&priv->lock, flags);
  404. if ((priv->line_status ^ prev_line_status) & CH341_BIT_DCD) {
  405. struct tty_struct *tty = tty_port_tty_get(&port->port);
  406. if (tty)
  407. usb_serial_handle_dcd_change(port, tty,
  408. priv->line_status & CH341_BIT_DCD);
  409. tty_kref_put(tty);
  410. }
  411. wake_up_interruptible(&port->delta_msr_wait);
  412. }
  413. exit:
  414. status = usb_submit_urb(urb, GFP_ATOMIC);
  415. if (status)
  416. dev_err(&urb->dev->dev,
  417. "%s - usb_submit_urb failed with result %d\n",
  418. __func__, status);
  419. }
  420. static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
  421. {
  422. struct ch341_private *priv = usb_get_serial_port_data(port);
  423. unsigned long flags;
  424. u8 prevstatus;
  425. u8 status;
  426. u8 changed;
  427. u8 multi_change = 0;
  428. spin_lock_irqsave(&priv->lock, flags);
  429. prevstatus = priv->line_status;
  430. priv->multi_status_change = 0;
  431. spin_unlock_irqrestore(&priv->lock, flags);
  432. while (!multi_change) {
  433. interruptible_sleep_on(&port->delta_msr_wait);
  434. /* see if a signal did it */
  435. if (signal_pending(current))
  436. return -ERESTARTSYS;
  437. if (port->serial->disconnected)
  438. return -EIO;
  439. spin_lock_irqsave(&priv->lock, flags);
  440. status = priv->line_status;
  441. multi_change = priv->multi_status_change;
  442. spin_unlock_irqrestore(&priv->lock, flags);
  443. changed = prevstatus ^ status;
  444. if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) ||
  445. ((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) ||
  446. ((arg & TIOCM_CD) && (changed & CH341_BIT_DCD)) ||
  447. ((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) {
  448. return 0;
  449. }
  450. prevstatus = status;
  451. }
  452. return 0;
  453. }
  454. static int ch341_ioctl(struct tty_struct *tty,
  455. unsigned int cmd, unsigned long arg)
  456. {
  457. struct usb_serial_port *port = tty->driver_data;
  458. dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
  459. switch (cmd) {
  460. case TIOCMIWAIT:
  461. dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
  462. return wait_modem_info(port, arg);
  463. default:
  464. dbg("%s not supported = 0x%04x", __func__, cmd);
  465. break;
  466. }
  467. return -ENOIOCTLCMD;
  468. }
  469. static int ch341_tiocmget(struct tty_struct *tty)
  470. {
  471. struct usb_serial_port *port = tty->driver_data;
  472. struct ch341_private *priv = usb_get_serial_port_data(port);
  473. unsigned long flags;
  474. u8 mcr;
  475. u8 status;
  476. unsigned int result;
  477. dbg("%s (%d)", __func__, port->number);
  478. spin_lock_irqsave(&priv->lock, flags);
  479. mcr = priv->line_control;
  480. status = priv->line_status;
  481. spin_unlock_irqrestore(&priv->lock, flags);
  482. result = ((mcr & CH341_BIT_DTR) ? TIOCM_DTR : 0)
  483. | ((mcr & CH341_BIT_RTS) ? TIOCM_RTS : 0)
  484. | ((status & CH341_BIT_CTS) ? TIOCM_CTS : 0)
  485. | ((status & CH341_BIT_DSR) ? TIOCM_DSR : 0)
  486. | ((status & CH341_BIT_RI) ? TIOCM_RI : 0)
  487. | ((status & CH341_BIT_DCD) ? TIOCM_CD : 0);
  488. dbg("%s - result = %x", __func__, result);
  489. return result;
  490. }
  491. static int ch341_reset_resume(struct usb_interface *intf)
  492. {
  493. struct usb_device *dev = interface_to_usbdev(intf);
  494. struct usb_serial *serial = NULL;
  495. struct ch341_private *priv;
  496. serial = usb_get_intfdata(intf);
  497. priv = usb_get_serial_port_data(serial->port[0]);
  498. /*reconfigure ch341 serial port after bus-reset*/
  499. ch341_configure(dev, priv);
  500. usb_serial_resume(intf);
  501. return 0;
  502. }
  503. static struct usb_driver ch341_driver = {
  504. .name = "ch341",
  505. .probe = usb_serial_probe,
  506. .disconnect = usb_serial_disconnect,
  507. .suspend = usb_serial_suspend,
  508. .resume = usb_serial_resume,
  509. .reset_resume = ch341_reset_resume,
  510. .id_table = id_table,
  511. .supports_autosuspend = 1,
  512. };
  513. static struct usb_serial_driver ch341_device = {
  514. .driver = {
  515. .owner = THIS_MODULE,
  516. .name = "ch341-uart",
  517. },
  518. .id_table = id_table,
  519. .num_ports = 1,
  520. .open = ch341_open,
  521. .dtr_rts = ch341_dtr_rts,
  522. .carrier_raised = ch341_carrier_raised,
  523. .close = ch341_close,
  524. .ioctl = ch341_ioctl,
  525. .set_termios = ch341_set_termios,
  526. .break_ctl = ch341_break_ctl,
  527. .tiocmget = ch341_tiocmget,
  528. .tiocmset = ch341_tiocmset,
  529. .read_int_callback = ch341_read_int_callback,
  530. .attach = ch341_attach,
  531. };
  532. static struct usb_serial_driver * const serial_drivers[] = {
  533. &ch341_device, NULL
  534. };
  535. module_usb_serial_driver(ch341_driver, serial_drivers);
  536. MODULE_LICENSE("GPL");
  537. module_param(debug, bool, S_IRUGO | S_IWUSR);
  538. MODULE_PARM_DESC(debug, "Debug enabled or not");