123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316 |
- /*
- * linux/arch/arm/plat-omap/debug-leds.c
- *
- * Copyright 2003 by Texas Instruments Incorporated
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #include <linux/gpio.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/leds.h>
- #include <linux/io.h>
- #include <mach/hardware.h>
- #include <asm/leds.h>
- #include <asm/mach-types.h>
- #include <plat/fpga.h>
- /* Many OMAP development platforms reuse the same "debug board"; these
- * platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
- * debug board (all green), accessed through FPGA registers.
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators
- * in preference to the ones on the debug board, for a "Disco LED" effect.
- *
- * This driver exports either the original ARM LED API, the new generic
- * one, or both.
- */
- static spinlock_t lock;
- static struct h2p2_dbg_fpga __iomem *fpga;
- static u16 led_state, hw_led_state;
- #ifdef CONFIG_OMAP_DEBUG_LEDS
- #define new_led_api() 1
- #else
- #define new_led_api() 0
- #endif
- /*-------------------------------------------------------------------------*/
- /* original ARM debug LED API:
- * - timer and idle leds (some boards use non-FPGA leds here);
- * - up to 4 generic leds, easily accessed in-kernel (any context)
- */
- #define GPIO_LED_RED 3
- #define GPIO_LED_GREEN OMAP_MPUIO(4)
- #define LED_STATE_ENABLED 0x01
- #define LED_STATE_CLAIMED 0x02
- #define LED_TIMER_ON 0x04
- #define GPIO_IDLE GPIO_LED_GREEN
- #define GPIO_TIMER GPIO_LED_RED
- static void h2p2_dbg_leds_event(led_event_t evt)
- {
- unsigned long flags;
- spin_lock_irqsave(&lock, flags);
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
- switch (evt) {
- case led_start:
- if (fpga)
- led_state |= LED_STATE_ENABLED;
- break;
- case led_stop:
- case led_halted:
- /* all leds off during suspend or shutdown */
- if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
- gpio_set_value(GPIO_TIMER, 0);
- gpio_set_value(GPIO_IDLE, 0);
- }
- __raw_writew(~0, &fpga->leds);
- led_state &= ~LED_STATE_ENABLED;
- goto done;
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- break;
- #ifdef CONFIG_LEDS_TIMER
- case led_timer:
- led_state ^= LED_TIMER_ON;
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
- else {
- gpio_set_value(GPIO_TIMER,
- led_state & LED_TIMER_ON);
- goto done;
- }
- break;
- #endif
- #ifdef CONFIG_LEDS_CPU
- /* LED lit iff busy */
- case led_idle_start:
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 1);
- goto done;
- }
- break;
- case led_idle_end:
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 0);
- goto done;
- }
- break;
- #endif
- case led_green_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
- break;
- case led_green_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
- break;
- case led_amber_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
- break;
- case led_amber_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
- break;
- case led_red_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_RED;
- break;
- case led_red_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
- break;
- case led_blue_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
- break;
- case led_blue_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
- break;
- default:
- break;
- }
- /*
- * Actually burn the LEDs
- */
- if (led_state & LED_STATE_ENABLED)
- __raw_writew(~hw_led_state, &fpga->leds);
- done:
- spin_unlock_irqrestore(&lock, flags);
- }
- /*-------------------------------------------------------------------------*/
- /* "new" LED API
- * - with syfs access and generic triggering
- * - not readily accessible to in-kernel drivers
- */
- struct dbg_led {
- struct led_classdev cdev;
- u16 mask;
- };
- static struct dbg_led dbg_leds[] = {
- /* REVISIT at least H2 uses different timer & cpu leds... */
- #ifndef CONFIG_LEDS_TIMER
- { .mask = 1 << 0, .cdev.name = "d4:green",
- .cdev.default_trigger = "heartbeat", },
- #endif
- #ifndef CONFIG_LEDS_CPU
- { .mask = 1 << 1, .cdev.name = "d5:green", }, /* !idle */
- #endif
- { .mask = 1 << 2, .cdev.name = "d6:green", },
- { .mask = 1 << 3, .cdev.name = "d7:green", },
- { .mask = 1 << 4, .cdev.name = "d8:green", },
- { .mask = 1 << 5, .cdev.name = "d9:green", },
- { .mask = 1 << 6, .cdev.name = "d10:green", },
- { .mask = 1 << 7, .cdev.name = "d11:green", },
- { .mask = 1 << 8, .cdev.name = "d12:green", },
- { .mask = 1 << 9, .cdev.name = "d13:green", },
- { .mask = 1 << 10, .cdev.name = "d14:green", },
- { .mask = 1 << 11, .cdev.name = "d15:green", },
- #ifndef CONFIG_LEDS
- { .mask = 1 << 12, .cdev.name = "d16:green", },
- { .mask = 1 << 13, .cdev.name = "d17:green", },
- { .mask = 1 << 14, .cdev.name = "d18:green", },
- { .mask = 1 << 15, .cdev.name = "d19:green", },
- #endif
- };
- static void
- fpga_led_set(struct led_classdev *cdev, enum led_brightness value)
- {
- struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
- unsigned long flags;
- spin_lock_irqsave(&lock, flags);
- if (value == LED_OFF)
- hw_led_state &= ~led->mask;
- else
- hw_led_state |= led->mask;
- __raw_writew(~hw_led_state, &fpga->leds);
- spin_unlock_irqrestore(&lock, flags);
- }
- static void __init newled_init(struct device *dev)
- {
- unsigned i;
- struct dbg_led *led;
- int status;
- for (i = 0, led = dbg_leds; i < ARRAY_SIZE(dbg_leds); i++, led++) {
- led->cdev.brightness_set = fpga_led_set;
- status = led_classdev_register(dev, &led->cdev);
- if (status < 0)
- break;
- }
- return;
- }
- /*-------------------------------------------------------------------------*/
- static int /* __init */ fpga_probe(struct platform_device *pdev)
- {
- struct resource *iomem;
- spin_lock_init(&lock);
- iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!iomem)
- return -ENODEV;
- fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE);
- __raw_writew(~0, &fpga->leds);
- #ifdef CONFIG_LEDS
- leds_event = h2p2_dbg_leds_event;
- leds_event(led_start);
- #endif
- if (new_led_api()) {
- newled_init(&pdev->dev);
- }
- return 0;
- }
- static int fpga_suspend_noirq(struct device *dev)
- {
- __raw_writew(~0, &fpga->leds);
- return 0;
- }
- static int fpga_resume_noirq(struct device *dev)
- {
- __raw_writew(~hw_led_state, &fpga->leds);
- return 0;
- }
- static const struct dev_pm_ops fpga_dev_pm_ops = {
- .suspend_noirq = fpga_suspend_noirq,
- .resume_noirq = fpga_resume_noirq,
- };
- static struct platform_driver led_driver = {
- .driver.name = "omap_dbg_led",
- .driver.pm = &fpga_dev_pm_ops,
- .probe = fpga_probe,
- };
- static int __init fpga_init(void)
- {
- if (machine_is_omap_h4()
- || machine_is_omap_h3()
- || machine_is_omap_h2()
- || machine_is_omap_perseus2()
- )
- return platform_driver_register(&led_driver);
- return 0;
- }
- fs_initcall(fpga_init);
|