board-csb637.c 3.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144
  1. /*
  2. * linux/arch/arm/mach-at91/board-csb637.c
  3. *
  4. * Copyright (C) 2005 SAN People
  5. *
  6. * This program is free software; you can redistribute it and/or modify
  7. * it under the terms of the GNU General Public License as published by
  8. * the Free Software Foundation; either version 2 of the License, or
  9. * (at your option) any later version.
  10. *
  11. * This program is distributed in the hope that it will be useful,
  12. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  14. * GNU General Public License for more details.
  15. *
  16. * You should have received a copy of the GNU General Public License
  17. * along with this program; if not, write to the Free Software
  18. * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  19. */
  20. #include <linux/types.h>
  21. #include <linux/init.h>
  22. #include <linux/gpio.h>
  23. #include <linux/mm.h>
  24. #include <linux/module.h>
  25. #include <linux/platform_device.h>
  26. #include <linux/mtd/physmap.h>
  27. #include <asm/setup.h>
  28. #include <asm/mach-types.h>
  29. #include <asm/irq.h>
  30. #include <asm/mach/arch.h>
  31. #include <asm/mach/map.h>
  32. #include <asm/mach/irq.h>
  33. #include <mach/hardware.h>
  34. #include <mach/board.h>
  35. #include "generic.h"
  36. static void __init csb637_init_early(void)
  37. {
  38. /* Initialize processor: 3.6864 MHz crystal */
  39. at91_initialize(3686400);
  40. /* DBGU on ttyS0. (Rx & Tx only) */
  41. at91_register_uart(0, 0, 0);
  42. /* make console=ttyS0 (ie, DBGU) the default */
  43. at91_set_serial_console(0);
  44. }
  45. static struct macb_platform_data __initdata csb637_eth_data = {
  46. .phy_irq_pin = AT91_PIN_PC0,
  47. .is_rmii = 0,
  48. };
  49. static struct at91_usbh_data __initdata csb637_usbh_data = {
  50. .ports = 2,
  51. .vbus_pin = {-EINVAL, -EINVAL},
  52. .overcurrent_pin= {-EINVAL, -EINVAL},
  53. };
  54. static struct at91_udc_data __initdata csb637_udc_data = {
  55. .vbus_pin = AT91_PIN_PB28,
  56. .pullup_pin = AT91_PIN_PB1,
  57. };
  58. #define CSB_FLASH_BASE AT91_CHIPSELECT_0
  59. #define CSB_FLASH_SIZE SZ_16M
  60. static struct mtd_partition csb_flash_partitions[] = {
  61. {
  62. .name = "uMON flash",
  63. .offset = 0,
  64. .size = MTDPART_SIZ_FULL,
  65. .mask_flags = MTD_WRITEABLE, /* read only */
  66. }
  67. };
  68. static struct physmap_flash_data csb_flash_data = {
  69. .width = 2,
  70. .parts = csb_flash_partitions,
  71. .nr_parts = ARRAY_SIZE(csb_flash_partitions),
  72. };
  73. static struct resource csb_flash_resources[] = {
  74. {
  75. .start = CSB_FLASH_BASE,
  76. .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
  77. .flags = IORESOURCE_MEM,
  78. }
  79. };
  80. static struct platform_device csb_flash = {
  81. .name = "physmap-flash",
  82. .id = 0,
  83. .dev = {
  84. .platform_data = &csb_flash_data,
  85. },
  86. .resource = csb_flash_resources,
  87. .num_resources = ARRAY_SIZE(csb_flash_resources),
  88. };
  89. static struct gpio_led csb_leds[] = {
  90. { /* "d1", red */
  91. .name = "d1",
  92. .gpio = AT91_PIN_PB2,
  93. .active_low = 1,
  94. .default_trigger = "heartbeat",
  95. },
  96. };
  97. static void __init csb637_board_init(void)
  98. {
  99. /* LED(s) */
  100. at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
  101. /* Serial */
  102. at91_add_device_serial();
  103. /* Ethernet */
  104. at91_add_device_eth(&csb637_eth_data);
  105. /* USB Host */
  106. at91_add_device_usbh(&csb637_usbh_data);
  107. /* USB Device */
  108. at91_add_device_udc(&csb637_udc_data);
  109. /* I2C */
  110. at91_add_device_i2c(NULL, 0);
  111. /* SPI */
  112. at91_add_device_spi(NULL, 0);
  113. /* NOR flash */
  114. platform_device_register(&csb_flash);
  115. }
  116. MACHINE_START(CSB637, "Cogent CSB637")
  117. /* Maintainer: Bill Gatliff */
  118. .timer = &at91rm9200_timer,
  119. .map_io = at91_map_io,
  120. .init_early = csb637_init_early,
  121. .init_irq = at91_init_irq_default,
  122. .init_machine = csb637_board_init,
  123. MACHINE_END