Kezdőlap Felfedezés Súgó
Bejelentkezés
esmith1412
/
libreboot
másolva libreboot/obsolete-repository-preserved-for-historical-purposes
Figyelés 1
Kedvenc 0
Másolás 0
Fájlok
Branch: r500-experimental
Branch-ok Tag-ek
libreboot
/
resources
/
memtest86plus
/
patch
/
config.h

config.h 1.6 KB
Állandó hivatkozás Előzmények Nyers

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253 
  1. /*
    2. 

  2.  * MemTest86+ V5 Specific code (GPL V2.0)
    3. 

  3.  * By Samuel DEMEULEMEESTER, sdemeule@memtest.org
    4. 

  4.  * http://www.canardpc.com - http://www.memtest.org
    5. 

  5.  * ------------------------------------------------
    6. 

  6.  * config.h - MemTest-86  Version 3.3
    7. 

  7.  *
    8. 

  8.  * Compile time configuration options
    9. 

  9.  *
    10. 

  10.  * Released under version 2 of the Gnu Public License.
    11. 

  11.  * By Chris Brady
    12. 

  12.  */
    13. 

  13. 

  14. /* CONSERVATIVE_SMP - If set to 0, SMP will be enabled by default */
    15. 

  15. /* Might be enabled in future revision after extensive testing */
    16. 

  16. /* In all cases, SMP is disabled by defaut on server platform */
    17. 

  17. #define CONSERVATIVE_SMP 1
    18. 

  18. 

  19. /* BEEP_MODE - Beep on error. Default off, Change to 1 to enable */
    20. 

  20. #define BEEP_MODE 1
    21. 

  21. 

  22. /* BEEP_END_NO_ERROR - Beep at end of each pass without error. Default off, Change to 1 to enable */
    23. 

  23. #define BEEP_END_NO_ERROR 0
    24. 

  24. 

  25. /* PARITY_MEM - Enables support for reporting memory parity errors */
    26. 

  26. /*	Experimental, normally enabled */
    27. 

  27. #define PARITY_MEM
    28. 

  28. 

  29. /* SERIAL_CONSOLE_DEFAULT -  The default state of the serial console. */
    30. 

  30. /*	This is normally off since it slows down testing.  Change to a 1 */
    31. 

  31. /*	to enable. */
    32. 

  32. #define SERIAL_CONSOLE_DEFAULT 0
    33. 

  33. 

  34. /* SERIAL_TTY - The default serial port to use. 0=ttyS0, 1=ttyS1 */ 
    35. 

  35. #define SERIAL_TTY 0
    36. 

  36. 

  37. /* SERIAL_BAUD_RATE - Baud rate for the serial console */
    38. 

  38. #define SERIAL_BAUD_RATE 115200
    39. 

  39. 

  40. /* SCRN_DEBUG - extra check for SCREEN_BUFFER
    41. 

  41.  */ 
    42. 

  42. /* #define SCRN_DEBUG */
    43. 

  43. 

  44. /* APM - Turns off APM at boot time to avoid blanking the screen */
    45. 

  45. /*	Normally enabled */
    46. 

  46. #define APM_OFF
    47. 

  47. 

  48. /* USB_WAR - Enables a workaround for errors caused by BIOS USB keyboard */
    49. 

  49. /*	and mouse support*/
    50. 

  50. /*	Normally enabled */
    51. 

  51. #define USB_WAR
    52. 

  52. 

  53.