raspi3-tutorial/08_power/README.md

Tutorial 08 - Power management

For embedded systems, power consumption is critical. The Raspberry Pi 3 has a very sophisticated PM interface. You can turn each device on and off idependently. There's a catch though, the GPIO VCC pins are hardwired, there's no way to turn them off programatically. This means if you connect some devices to them, you'll have to implement a way to turn those devices off (with a transistor connected to a data GPIO pin for example).

Power.h, power.c

The power management controller is one of the peripherals that are not emulated properly by qemu. Works on real hardware though.

power_off() shutdowns the board to a almost zero power consumption state.

reset() reboots the machine. Also handled by the PMC, and since the Raspberry Pi does not have a hardware reset button, it's very useful.

Main

We display a simple menu, and wait for user input. Depending on the input, we reboot the system or power it off.