parabolaiso/docs

=======
profile
=======

A parabolaiso profile consists of several configuration files and a directory for files to be added to the resulting image.

.. code:: plaintext

profile/
├── airootfs/
├── efiboot/
├── syslinux/
├── grub/
├── bootstrap_packages.arch
├── packages.arch
├── pacman.conf
└── profiledef.sh

The required files and directories are explained in the following sections.

profiledef.sh
=============

This file describes several attributes of the resulting image and is a place for customization to the general behavior
of the image.

The image file is constructed from some of the variables in ``profiledef.sh``: ``--.iso``
(e.g. ``parabola-202010-x86_64.iso``).

* ``iso_name``: The first part of the name of the resulting image (defaults to ``mkparabolaiso``)
* ``iso_label``: The ISO's volume label (defaults to ``MKPARABOLAISO``)
* ``iso_publisher``: A free-form string that states the publisher of the resulting image (defaults to ``mkparabolaiso``)
* ``iso_application``: A free-form string that states the application (i.e. its use-case) of the resulting image (defaults
to ``mkparabolaiso iso``)
* ``iso_version``: A string that states the version of the resulting image (defaults to ``""``)
* ``install_dir``: A string (maximum eight characters long, which **must** consist of ``[a-z0-9]``) that states the
directory on the resulting image into which all files will be installed (defaults to ``mkparabolaiso``)
* ``buildmodes``: An optional list of strings, that state the build modes that the profile uses. Only the following are
understood:

- ``bootstrap``: Build a compressed file containing a minimal system to bootstrap from
- ``iso``: Build a bootable ISO image (implicit default, if no ``buildmodes`` are set)
- ``netboot``: Build artifacts required for netboot using iPXE
* ``bootmodes``: A list of strings, that state the supported boot modes of the resulting image. Only the following are
understood:

- ``bios.syslinux.mbr``: Syslinux for x86 BIOS booting from a disk
- ``bios.syslinux.eltorito``: Syslinux for x86 BIOS booting from an optical disc
- ``uefi-ia32.grub.esp``: GRUB for IA32 UEFI booting from a disk
- ``uefi-ia32.grub.eltorito``: GRUB for IA32 UEFI booting from an optical disc
- ``uefi-x64.grub.esp``: GRUB for x64 UEFI booting from a disk
- ``uefi-x64.grub.eltorito``: GRUB for x64 UEFI booting from an optical disc
- ``uefi-ia32.systemd-boot.esp``: systemd-boot for IA32 UEFI booting from a disk
- ``uefi-ia32.systemd-boot.eltorito``: systemd-boot for IA32UEFI booting from an optical disc
- ``uefi-x64.systemd-boot.esp``: systemd-boot for x64 UEFI booting from a disk
- ``uefi-x64.systemd-boot.eltorito``: systemd-boot for x64 UEFI booting from an optical disc
Note that BIOS El Torito boot mode must always be listed before UEFI El Torito boot mode.
* ``arch``: The architecture (e.g. ``x86_64``) to build the image for. This is also used to resolve the name of the packages
file (e.g. ``packages.x86_64``)
* ``pacman_conf``: The ``pacman.conf`` to use to install packages to the work directory when creating the image (defaults to
the host's ``/etc/pacman.conf``)
* ``airootfs_image_type``: The image type to create. The following options are understood (defaults to ``squashfs``):

- ``squashfs``: Create a squashfs image directly from the airootfs work directory
- ``ext4+squashfs``: Create an ext4 partition, copy the airootfs work directory to it and create a squashfs image from it
- ``erofs``: Create an EROFS image for the airootfs work directory
* ``airootfs_image_tool_options``: An array of options to pass to the tool to create the airootfs image. ``mksquashfs`` and
``mkfs.erofs`` are supported. See ``mksquashfs --help`` or ``mkfs.erofs --help`` for all possible options
* ``file_permissions``: An associative array that lists files and/or directories who need specific ownership or
permissions. The array's keys contain the path and the value is a colon separated list of owner UID, owner GID and
access mode. E.g. ``file_permissions=(["/etc/shadow"]="0:0:400")``. When directories are listed with a trailing backslash (``/``) **all** files and directories contained within the listed directory will have the same owner UID, owner GID, and access mode applied recursively.

bootstrap_packages.arch
=======================

All packages to be installed into the environment of a bootstrap image have to be listed in an architecture specific
file (e.g. ``bootstrap_packages.x86_64``), which resides top-level in the profile.

Packages have to be listed one per line. Lines starting with a ``#`` and blank lines are ignored.

This file is required when generating bootstrap images using the ``bootstrap`` build mode.

packages.arch
=============

All packages to be installed into the environment of an ISO image have to be listed in an architecture specific file
(e.g. ``packages.x86_64``), which resides top-level in the profile.

Packages have to be listed one per line. Lines starting with a ``#`` and blank lines are ignored.

.. note::

The **mkinitcpio** and **mkinitcpio-parabolaiso** packages are mandatory (see `#30
`_).

This file is required when generating ISO images using the ``iso`` or ``netboot`` build modes.

pacman.conf
===========

A configuration for pacman is required per profile.

Some configuration options will not be used or will be modified:

* ``CacheDir``: the profile's option is **only** used if it is not the default (i.e. ``/var/cache/pacman/pkg``) and if it is
not the same as the system's option. In all other cases the system's pacman cache is used.
* ``HookDir``: it is **always** set to the ``/etc/pacman.d/hooks`` directory in the work directory's airootfs to allow
modification via the profile and ensure interoparability with hosts using dracut (see `#73
`_)
* ``RootDir``: it is **always** removed, as setting it explicitely otherwise refers to the host's root filesystem (see
``man 8 pacman`` for further information on the ``-r`` option used by ``pacstrap``)
* ``LogFile``: it is **always** removed, as setting it explicitely otherwise refers to the host's pacman log file (see
``man 8 pacman`` for further information on the ``-r`` option used by ``pacstrap``)
* ``DBPath``: it is **always** removed, as setting it explicitely otherwise refers to the host's pacman database (see
``man 8 pacman`` for further information on the ``-r`` option used by ``pacstrap``)

airootfs
========

This optional directory may contain files and directories that will be copied to the work directory of the resulting
image's root filesystem.
The files are copied before packages are being installed to work directory location.
Ownership and permissions of files and directories from the profile's ``airootfs`` directory are not preserved. The mode
will be ``644`` for files and ``755`` for directories, all of them will be owned by root. To set custom ownership and/or
permissions, use ``file_permissions`` in ``profiledef.sh``.

With this overlay structure it is possible to e.g. create users and set passwords for them, by providing
``airootfs/etc/passwd``, ``airootfs/etc/shadow``, ``airootfs/etc/gshadow`` (see ``man 5 passwd``, ``man 5 shadow`` and ``man 5 gshadow`` respectively).
If user home directories exist in the profile's ``airootfs``, their ownership and (and top-level) permissions will be
altered according to the provided information in the password file.

Boot loader configuration
=========================

A profile may contain configuration for several boot loaders. These reside in specific top-level directories, which are
explained in the following subsections.

The following *custom template identifiers* are understood and will be replaced according to the assignments of the
respective variables in ``profiledef.sh``:

* ``%PARABOLAISO_LABEL%``: Set this using the ``iso_label`` variable in ``profiledef.sh``.
* ``%INSTALL_DIR%``: Set this using the ``install_dir`` variable in ``profiledef.sh``.
* ``%ARCH%``: Set this using the ``arch`` variable in ``profiledef.sh``.

Additionally there are also *custom template identifiers* have harcoded values set by ``mkparabolaiso`` that cannot be
overridden:

* ``%PARABOLAISO_UUID%``: the ISO 9660 modification date in UTC, i.e. its "UUID",
* ``%PARABOLAISO_SEARCH_FILENAME%``: file path on ISO 9660 that can be used by GRUB to find the ISO volume
(**for GRUB ``.cfg`` files only**).


efiboot
-------

This directory is mandatory when the ``uefi-x64.systemd-boot.esp`` or ``uefi-x64.systemd-boot.eltorito`` bootmodes are
selected in ``profiledef.sh``. It contains configuration for `systemd-boot
`_.

.. note::

The directory is a top-level representation of the systemd-boot configuration directories and files found in the
root of an EFI system partition.

The *custom template identifiers* are **only** understood in the boot loader entry `.conf` files (i.e. **not** in
``loader.conf``).

The same applies for the ``uefi-x64.refind.esp`` and ``uefi-x64.refind.eltorito`` bootmodes. In the case of OpenRC profiles,
this directory contains configuration for `rEFInd `_.

syslinux
--------

This directory is mandatory when the ``bios.syslinux.mbr`` or the ``bios.syslinux.eltorito`` bootmodes are selected in
``profiledef.sh``.
It contains configuration files for `syslinux `_ or `isolinux
`_ , or `pxelinux
`_ used in the resuling image.

The *custom template identifiers* are understood in all `.cfg` files in this directory.

grub
----

This directory is mandatory when any of the following bootmodes is used in ``profiledef.sh``:

- ``uefi-ia32.grub.esp`` or
- ``uefi-ia32.grub.eltorito`` or
- ``uefi-x64.grub.esp`` or
- ``uefi-x64.grub.eltorito``

It contains configuration files for `GRUB `_
used in the resulting image.