qi-hardware-kicad-libs/modules/phonejack.fpd

/* MACHINE-GENERATED ! */

frame pad {
	__0: vec @(roundx/2, roundy/2)
	__1: vec @(-roundx/2, -roundy/2)
	hole . __0
	__2: vec @(ratio*roundx/2, -ratio*roundy/2)
	__3: vec @(-ratio*roundx/2, ratio*roundy/2)
	rpad "$n" . __2 bare
}

frame pads {
	table
	    { n, px, py }
	    { 1, -1.2mm, 0.85mm }
	    { 2, -9.3mm, -1.15mm }
	    { 3, -7.4mm, 0.85mm }
	    { 4, -12.9mm, 0.85mm }
	    { 5, -3.65mm, -1.15mm }

	__0: vec @(px, py)
	frame pad .
}

frame outline {
	__0: vec @(0mm, rty)
	__1: vec @(-rx, -rby)
	rect . __0 w
	__2: vec @(fx, 0mm)
	__3: vec .(0mm, -fy/2)
	__4: vec .(-fx, 0mm)
	line __3 . w
	__5: vec __2(0mm, fy/2)
	line . __3 w
	__6: vec .(-fx, 0mm)
	line . __5 w
	__7: vec @(-3.65mm, -1.15mm)
	__8: vec @(-7.4mm, 0.85mm)
	__9: vec @(-9.3mm, -1.15mm)
}

package "phonejack-${size}-${N}"
unit mm

table
    { size, N, roundx, roundy, ratio, rty, rby, fx, fy, rx, diff }
    { 3.5, 5, 0.6mm, 2mm, 1.8, 4.9mm, 8.2mm-rty, 4mm, 6mm, 14mm, 0.85mm }

set w = 5mil

frame pads @
frame outline @
measx pad.__1 -> pad.__0 -roundy/2
measx pad.__3 -> pad.__2 0.5mm
measy pad.__1 -> pad.__0 roundx
measy pad.__2 -> pad.__3 ratio*roundx+1mm
measy outline.__1 >> outline.__0 0.5mm
measx outline.__1 >> outline.__0 rby+rty+3mm
meas outline.__6 >> outline.__5 0.5mm
meas outline.__3 >> outline.__5 -0.5mm
measy outline.__2 >> outline.__0 fx+0.3mm
measy outline.__2 >> pads.__0 fx+1.2mm+1mm
measy outline.__7 >> outline.__2 1mm
measx outline.__0 << pads.__0 rty
measx pads.__0 >> outline.__0 rty+1.8mm
measx outline.__7 >> outline.__0 rty+2.5mm
measx outline.__8 >> outline.__0 rty+1mm
measx outline.__0 >> outline.__9 -2.2mm