putty/window.c

#include <stdio.h>
#include <stdlib.h>
#include <ctype.h>
#include <time.h>
#include <assert.h>

#define PUTTY_DO_GLOBALS	       /* actually _define_ globals */
#include "putty.h"
#include "terminal.h"
#include "storage.h"
#include "win_res.h"

#ifndef NO_MULTIMON
#if WINVER < 0x0500
#define COMPILE_MULTIMON_STUBS
#include <multimon.h>
#endif
#endif

#include <imm.h>
#include <commctrl.h>
#include <richedit.h>
#include <mmsystem.h>

#define IDM_SHOWLOG   0x0010
#define IDM_NEWSESS   0x0020
#define IDM_DUPSESS   0x0030
#define IDM_RESTART   0x0040
#define IDM_RECONF    0x0050
#define IDM_CLRSB     0x0060
#define IDM_RESET     0x0070
#define IDM_HELP      0x0140
#define IDM_ABOUT     0x0150
#define IDM_SAVEDSESS 0x0160
#define IDM_COPYALL   0x0170
#define IDM_FULLSCREEN	0x0180
#define IDM_PASTE     0x0190

#define IDM_SESSLGP   0x0250	       /* log type printable */
#define IDM_SESSLGA   0x0260	       /* log type all chars */
#define IDM_SESSLGE   0x0270	       /* log end */

#define IDM_SPECIAL_MIN 0x0400
#define IDM_SPECIAL_MAX 0x0800

#define IDM_SAVED_MIN 0x1000
#define IDM_SAVED_MAX 0x2000

#define WM_IGNORE_CLIP (WM_XUSER + 2)
#define WM_FULLSCR_ON_MAX (WM_XUSER + 3)
#define WM_AGENT_CALLBACK (WM_XUSER + 4)

/* Needed for Chinese support and apparently not always defined. */
#ifndef VK_PROCESSKEY
#define VK_PROCESSKEY 0xE5
#endif

/* Mouse wheel support. */
#ifndef WM_MOUSEWHEEL
#define WM_MOUSEWHEEL 0x020A	       /* not defined in earlier SDKs */
#endif
#ifndef WHEEL_DELTA
#define WHEEL_DELTA 120
#endif

static Mouse_Button translate_button(Mouse_Button button);
static LRESULT CALLBACK WndProc(HWND, UINT, WPARAM, LPARAM);
static int TranslateKey(UINT message, WPARAM wParam, LPARAM lParam,
			unsigned char *output);
static void cfgtopalette(void);
static void systopalette(void);
static void init_palette(void);
static void init_fonts(int, int);
static void another_font(int);
static void deinit_fonts(void);
static void set_input_locale(HKL);

static int is_full_screen(void);
static void make_full_screen(void);
static void clear_full_screen(void);
static void flip_full_screen(void);

/* Window layout information */
static void reset_window(int);
static int extra_width, extra_height;
static int font_width, font_height, font_dualwidth;
static int offset_width, offset_height;
static int was_zoomed = 0;
static int prev_rows, prev_cols;
  
static int pending_netevent = 0;
static WPARAM pend_netevent_wParam = 0;
static LPARAM pend_netevent_lParam = 0;
static void enact_pending_netevent(void);
static void flash_window(int mode);
static void sys_cursor_update(void);
static int is_shift_pressed(void);
static int get_fullscreen_rect(RECT * ss);

static time_t last_movement = 0;

static int caret_x = -1, caret_y = -1;

static int kbd_codepage;

static void *ldisc;
static Backend *back;
static void *backhandle;

static struct unicode_data ucsdata;
static int session_closed;

static const struct telnet_special *specials;
static int n_specials;

static struct {
    HMENU menu;
    int specials_submenu_pos;
} popup_menus[2];
enum { SYSMENU, CTXMENU };

Config cfg;			       /* exported to windlg.c */

extern struct sesslist sesslist;       /* imported from windlg.c */

struct agent_callback {
    void (*callback)(void *, void *, int);
    void *callback_ctx;
    void *data;
    int len;
};

#define FONT_NORMAL 0
#define FONT_BOLD 1
#define FONT_UNDERLINE 2
#define FONT_BOLDUND 3
#define FONT_WIDE	0x04
#define FONT_HIGH	0x08
#define FONT_NARROW	0x10

#define FONT_OEM 	0x20
#define FONT_OEMBOLD 	0x21
#define FONT_OEMUND 	0x22
#define FONT_OEMBOLDUND 0x23

#define FONT_MAXNO 	0x2F
#define FONT_SHIFT	5
static HFONT fonts[FONT_MAXNO];
static LOGFONT lfont;
static int fontflag[FONT_MAXNO];
static enum {
    BOLD_COLOURS, BOLD_SHADOW, BOLD_FONT
} bold_mode;
static enum {
    UND_LINE, UND_FONT
} und_mode;
static int descent;

#define NCOLOURS 24
static COLORREF colours[NCOLOURS];
static HPALETTE pal;
static LPLOGPALETTE logpal;
static RGBTRIPLE defpal[NCOLOURS];

static HWND hwnd;

static HBITMAP caretbm;

static int dbltime, lasttime, lastact;
static Mouse_Button lastbtn;

/* this allows xterm-style mouse handling. */
static int send_raw_mouse = 0;
static int wheel_accumulator = 0;

static char *window_name, *icon_name;

static int compose_state = 0;

static UINT wm_mousewheel = WM_MOUSEWHEEL;

/* Dummy routine, only required in plink. */
void ldisc_update(void *frontend, int echo, int edit)
{
}

static void start_backend(void)
{
    const char *error;
    char msg[1024], *title;
    char *realhost;
    int i;

    /*
     * Select protocol. This is farmed out into a table in a
     * separate file to enable an ssh-free variant.
     */
    back = NULL;
    for (i = 0; backends[i].backend != NULL; i++)
	if (backends[i].protocol == cfg.protocol) {
	    back = backends[i].backend;
	    break;
	}
    if (back == NULL) {
	char *str = dupprintf("%s Internal Error", appname);
	MessageBox(NULL, "Unsupported protocol number found",
		   str, MB_OK | MB_ICONEXCLAMATION);
	sfree(str);
	cleanup_exit(1);
    }

    error = back->init(NULL, &backhandle, &cfg,
		       cfg.host, cfg.port, &realhost, cfg.tcp_nodelay,
		       cfg.tcp_keepalives);
    back->provide_logctx(backhandle, logctx);
    if (error) {
	char *str = dupprintf("%s Error", appname);
	sprintf(msg, "Unable to open connection to\n"
		"%.800s\n" "%s", cfg.host, error);
	MessageBox(NULL, msg, str, MB_ICONERROR | MB_OK);
	sfree(str);
	exit(0);
    }
    window_name = icon_name = NULL;
    if (*cfg.wintitle) {
	title = cfg.wintitle;
    } else {
	sprintf(msg, "%s - %s", realhost, appname);
	title = msg;
    }
    sfree(realhost);
    set_title(NULL, title);
    set_icon(NULL, title);

    /*
     * Connect the terminal to the backend for resize purposes.
     */
    term_provide_resize_fn(term, back->size, backhandle);

    /*
     * Set up a line discipline.
     */
    ldisc = ldisc_create(&cfg, term, back, backhandle, NULL);

    /*
     * Destroy the Restart Session menu item. (This will return
     * failure if it's already absent, as it will be the very first
     * time we call this function. We ignore that, because as long
     * as the menu item ends up not being there, we don't care
     * whether it was us who removed it or not!)
     */
    for (i = 0; i < lenof(popup_menus); i++) {
	DeleteMenu(popup_menus[i].menu, IDM_RESTART, MF_BYCOMMAND);
    }

    session_closed = FALSE;
}

static void close_session(void)
{
    char morestuff[100];
    int i;

    session_closed = TRUE;
    sprintf(morestuff, "%.70s (inactive)", appname);
    set_icon(NULL, morestuff);
    set_title(NULL, morestuff);

    if (ldisc) {
	ldisc_free(ldisc);
	ldisc = NULL;
    }
    if (back) {
	back->free(backhandle);
	backhandle = NULL;
	back = NULL;
	update_specials_menu(NULL);
    }

    /*
     * Show the Restart Session menu item. Do a precautionary
     * delete first to ensure we never end up with more than one.
     */
    for (i = 0; i < lenof(popup_menus); i++) {
	DeleteMenu(popup_menus[i].menu, IDM_RESTART, MF_BYCOMMAND);
	InsertMenu(popup_menus[i].menu, IDM_DUPSESS, MF_BYCOMMAND | MF_ENABLED,
		   IDM_RESTART, "&Restart Session");
    }
}

int WINAPI WinMain(HINSTANCE inst, HINSTANCE prev, LPSTR cmdline, int show)
{
    WNDCLASS wndclass;
    MSG msg;
    int guess_width, guess_height;

    hinst = inst;
    flags = FLAG_VERBOSE | FLAG_INTERACTIVE;

    sk_init();

    InitCommonControls();

    /* Ensure a Maximize setting in Explorer doesn't maximise the
     * config box. */
    defuse_showwindow();

    if (!init_winver())
    {
	char *str = dupprintf("%s Fatal Error", appname);
	MessageBox(NULL, "Windows refuses to report a version",
		   str, MB_OK | MB_ICONEXCLAMATION);
	sfree(str);
	return 1;
    }

    /*
     * If we're running a version of Windows that doesn't support
     * WM_MOUSEWHEEL, find out what message number we should be
     * using instead.
     */
    if (osVersion.dwMajorVersion < 4 ||
	(osVersion.dwMajorVersion == 4 && 
	 osVersion.dwPlatformId != VER_PLATFORM_WIN32_NT))
	wm_mousewheel = RegisterWindowMessage("MSWHEEL_ROLLMSG");

    /*
     * See if we can find our Help file.
     */
    {
        char b[2048], *p, *q, *r;
        FILE *fp;
        GetModuleFileName(NULL, b, sizeof(b) - 1);
        r = b;
        p = strrchr(b, '\\');
        if (p && p >= r) r = p+1;
        q = strrchr(b, ':');
        if (q && q >= r) r = q+1;
        strcpy(r, "putty.hlp");
        if ( (fp = fopen(b, "r")) != NULL) {
            help_path = dupstr(b);
            fclose(fp);
        } else
            help_path = NULL;
        strcpy(r, "putty.cnt");
        if ( (fp = fopen(b, "r")) != NULL) {
            help_has_contents = TRUE;
            fclose(fp);
        } else
            help_has_contents = FALSE;
    }

    /*
     * Process the command line.
     */
    {
	char *p;
	int got_host = 0;

	default_protocol = be_default_protocol;
	/* Find the appropriate default port. */
	{
	    int i;
	    default_port = 0; /* illegal */
	    for (i = 0; backends[i].backend != NULL; i++)
		if (backends[i].protocol == default_protocol) {
		    default_port = backends[i].backend->default_port;
		    break;
		}
	}
	cfg.logtype = LGTYP_NONE;

	do_defaults(NULL, &cfg);

	p = cmdline;

	/*
	 * Process a couple of command-line options which are more
	 * easily dealt with before the line is broken up into
	 * words. These are the soon-to-be-defunct @sessionname and
	 * the internal-use-only &sharedmemoryhandle, neither of
	 * which are combined with anything else.
	 */
	while (*p && isspace(*p))
	    p++;
	if (*p == '@') {
	    int i = strlen(p);
	    while (i > 1 && isspace(p[i - 1]))
		i--;
	    p[i] = '\0';
	    do_defaults(p + 1, &cfg);
	    if (!*cfg.host && !do_config()) {
		cleanup_exit(0);
	    }
	} else if (*p == '&') {
	    /*
	     * An initial & means we've been given a command line
	     * containing the hex value of a HANDLE for a file
	     * mapping object, which we must then extract as a
	     * config.
	     */
	    HANDLE filemap;
	    Config *cp;
	    if (sscanf(p + 1, "%p", &filemap) == 1 &&
		(cp = MapViewOfFile(filemap, FILE_MAP_READ,
				    0, 0, sizeof(Config))) != NULL) {
		cfg = *cp;
		UnmapViewOfFile(cp);
		CloseHandle(filemap);
	    } else if (!do_config()) {
		cleanup_exit(0);
	    }
	} else {
	    /*
	     * Otherwise, break up the command line and deal with
	     * it sensibly.
	     */
	    int argc, i;
	    char **argv;
	    
	    split_into_argv(cmdline, &argc, &argv, NULL);

	    for (i = 0; i < argc; i++) {
		char *p = argv[i];
		int ret;

		ret = cmdline_process_param(p, i+1<argc?argv[i+1]:NULL,
					    1, &cfg);
		if (ret == -2) {
		    cmdline_error("option \"%s\" requires an argument", p);
		} else if (ret == 2) {
		    i++;	       /* skip next argument */
		} else if (ret == 1) {
		    continue;	       /* nothing further needs doing */
		} else if (!strcmp(p, "-cleanup")) {
		    /*
		     * `putty -cleanup'. Remove all registry
		     * entries associated with PuTTY, and also find
		     * and delete the random seed file.
		     */
		    char *s1, *s2;
		    s1 = dupprintf("This procedure will remove ALL Registry\n"
				   "entries associated with %s, and will\n"
				   "also remove the random seed file.\n"
				   "\n"
				   "THIS PROCESS WILL DESTROY YOUR SAVED\n"
				   "SESSIONS. Are you really sure you want\n"
				   "to continue?", appname);
		    s2 = dupprintf("%s Warning", appname);
		    if (MessageBox(NULL, s1, s2,
				   MB_YESNO | MB_ICONWARNING) == IDYES) {
			cleanup_all();
		    }
		    sfree(s1);
		    sfree(s2);
		    exit(0);
		} else if (*p != '-') {
		    char *q = p;
		    if (got_host) {
			/*
			 * If we already have a host name, treat
			 * this argument as a port number. NB we
			 * have to treat this as a saved -P
			 * argument, so that it will be deferred
			 * until it's a good moment to run it.
			 */
			int ret = cmdline_process_param("-P", p, 1, &cfg);
			assert(ret == 2);
		    } else if (!strncmp(q, "telnet:", 7)) {
			/*
			 * If the hostname starts with "telnet:",
			 * set the protocol to Telnet and process
			 * the string as a Telnet URL.
			 */
			char c;

			q += 7;
			if (q[0] == '/' && q[1] == '/')
			    q += 2;
			cfg.protocol = PROT_TELNET;
			p = q;
			while (*p && *p != ':' && *p != '/')
			    p++;
			c = *p;
			if (*p)
			    *p++ = '\0';
			if (c == ':')
			    cfg.port = atoi(p);
			else
			    cfg.port = -1;
			strncpy(cfg.host, q, sizeof(cfg.host) - 1);
			cfg.host[sizeof(cfg.host) - 1] = '\0';
			got_host = 1;
		    } else {
			/*
			 * Otherwise, treat this argument as a host
			 * name.
			 */
			while (*p && !isspace(*p))
			    p++;
			if (*p)
			    *p++ = '\0';
			strncpy(cfg.host, q, sizeof(cfg.host) - 1);
			cfg.host[sizeof(cfg.host) - 1] = '\0';
			got_host = 1;
		    }
		} else {
		    cmdline_error("unknown option \"%s\"", p);
		}
	    }
	}

	cmdline_run_saved(&cfg);

	if (!*cfg.host && !do_config()) {
	    cleanup_exit(0);
	}

	/*
	 * Trim leading whitespace off the hostname if it's there.
	 */
	{
	    int space = strspn(cfg.host, " \t");
	    memmove(cfg.host, cfg.host+space, 1+strlen(cfg.host)-space);
	}

	/* See if host is of the form user@host */
	if (cfg.host[0] != '\0') {
	    char *atsign = strrchr(cfg.host, '@');
	    /* Make sure we're not overflowing the user field */
	    if (atsign) {
		if (atsign - cfg.host < sizeof cfg.username) {
		    strncpy(cfg.username, cfg.host, atsign - cfg.host);
		    cfg.username[atsign - cfg.host] = '\0';
		}
		memmove(cfg.host, atsign + 1, 1 + strlen(atsign + 1));
	    }
	}

	/*
	 * Trim a colon suffix off the hostname if it's there.
	 */
	cfg.host[strcspn(cfg.host, ":")] = '\0';

	/*
	 * Remove any remaining whitespace from the hostname.
	 */
	{
	    int p1 = 0, p2 = 0;
	    while (cfg.host[p2] != '\0') {
		if (cfg.host[p2] != ' ' && cfg.host[p2] != '\t') {
		    cfg.host[p1] = cfg.host[p2];
		    p1++;
		}
		p2++;
	    }
	    cfg.host[p1] = '\0';
	}
    }

    /* Check for invalid Port number (i.e. zero) */
    if (cfg.port == 0) {
	char *str = dupprintf("%s Internal Error", appname);
	MessageBox(NULL, "Invalid Port Number",
		   str, MB_OK | MB_ICONEXCLAMATION);
	sfree(str);
	cleanup_exit(1);
    }

    if (!prev) {
	wndclass.style = 0;
	wndclass.lpfnWndProc = WndProc;
	wndclass.cbClsExtra = 0;
	wndclass.cbWndExtra = 0;
	wndclass.hInstance = inst;
	wndclass.hIcon = LoadIcon(inst, MAKEINTRESOURCE(IDI_MAINICON));
	wndclass.hCursor = LoadCursor(NULL, IDC_IBEAM);
	wndclass.hbrBackground = NULL;
	wndclass.lpszMenuName = NULL;
	wndclass.lpszClassName = appname;

	RegisterClass(&wndclass);
    }

    hwnd = NULL;

    memset(&ucsdata, 0, sizeof(ucsdata));

    term = term_init(&cfg, &ucsdata, NULL);
    logctx = log_init(NULL, &cfg);
    term_provide_logctx(term, logctx);

    cfgtopalette();

    /*
     * Guess some defaults for the window size. This all gets
     * updated later, so we don't really care too much. However, we
     * do want the font width/height guesses to correspond to a
     * large font rather than a small one...
     */

    font_width = 10;
    font_height = 20;
    extra_width = 25;
    extra_height = 28;
    term_size(term, cfg.height, cfg.width, cfg.savelines);
    guess_width = extra_width + font_width * term->cols;
    guess_height = extra_height + font_height * term->rows;
    {
	RECT r;
		get_fullscreen_rect(&r);
	if (guess_width > r.right - r.left)
	    guess_width = r.right - r.left;
	if (guess_height > r.bottom - r.top)
	    guess_height = r.bottom - r.top;
    }

    {
	int winmode = WS_OVERLAPPEDWINDOW | WS_VSCROLL;
	int exwinmode = 0;
	if (!cfg.scrollbar)
	    winmode &= ~(WS_VSCROLL);
	if (cfg.resize_action == RESIZE_DISABLED)
	    winmode &= ~(WS_THICKFRAME | WS_MAXIMIZEBOX);
	if (cfg.alwaysontop)
	    exwinmode |= WS_EX_TOPMOST;
	if (cfg.sunken_edge)
	    exwinmode |= WS_EX_CLIENTEDGE;
	hwnd = CreateWindowEx(exwinmode, appname, appname,
			      winmode, CW_USEDEFAULT, CW_USEDEFAULT,
			      guess_width, guess_height,
			      NULL, NULL, inst, NULL);
    }

    /*
     * Initialise the fonts, simultaneously correcting the guesses
     * for font_{width,height}.
     */
    init_fonts(0,0);

    /*
     * Correct the guesses for extra_{width,height}.
     */
    {
	RECT cr, wr;
	GetWindowRect(hwnd, &wr);
	GetClientRect(hwnd, &cr);
	offset_width = offset_height = cfg.window_border;
	extra_width = wr.right - wr.left - cr.right + cr.left + offset_width*2;
	extra_height = wr.bottom - wr.top - cr.bottom + cr.top +offset_height*2;
    }

    /*
     * Resize the window, now we know what size we _really_ want it
     * to be.
     */
    guess_width = extra_width + font_width * term->cols;
    guess_height = extra_height + font_height * term->rows;
    SetWindowPos(hwnd, NULL, 0, 0, guess_width, guess_height,
		 SWP_NOMOVE | SWP_NOREDRAW | SWP_NOZORDER);

    /*
     * Set up a caret bitmap, with no content.
     */
    {
	char *bits;
	int size = (font_width + 15) / 16 * 2 * font_height;
	bits = snewn(size, char);
	memset(bits, 0, size);
	caretbm = CreateBitmap(font_width, font_height, 1, 1, bits);
	sfree(bits);
    }
    CreateCaret(hwnd, caretbm, font_width, font_height);

    /*
     * Initialise the scroll bar.
     */
    {
	SCROLLINFO si;

	si.cbSize = sizeof(si);
	si.fMask = SIF_ALL | SIF_DISABLENOSCROLL;
	si.nMin = 0;
	si.nMax = term->rows - 1;
	si.nPage = term->rows;
	si.nPos = 0;
	SetScrollInfo(hwnd, SB_VERT, &si, FALSE);
    }

    /*
     * Prepare the mouse handler.
     */
    lastact = MA_NOTHING;
    lastbtn = MBT_NOTHING;
    dbltime = GetDoubleClickTime();

    /*
     * Set up the session-control options on the system menu.
     */
    {
	HMENU s, m;
	int i, j;
	char *str;

	popup_menus[SYSMENU].menu = GetSystemMenu(hwnd, FALSE);
	popup_menus[CTXMENU].menu = CreatePopupMenu();
	AppendMenu(popup_menus[CTXMENU].menu, MF_ENABLED, IDM_PASTE, "&Paste");

	s = CreateMenu();
	get_sesslist(&sesslist, TRUE);
	for (i = 1;
	     i < ((sesslist.nsessions < 256) ? sesslist.nsessions : 256);
	     i++)
	    AppendMenu(s, MF_ENABLED, IDM_SAVED_MIN + (16 * i),
		       sesslist.sessions[i]);

	for (j = 0; j < lenof(popup_menus); j++) {
	    m = popup_menus[j].menu;

	    AppendMenu(m, MF_SEPARATOR, 0, 0);
	    popup_menus[j].specials_submenu_pos = GetMenuItemCount(m);
	    AppendMenu(m, MF_ENABLED, IDM_SHOWLOG, "&Event Log");
	    AppendMenu(m, MF_SEPARATOR, 0, 0);
	    AppendMenu(m, MF_ENABLED, IDM_NEWSESS, "Ne&w Session...");
	    AppendMenu(m, MF_ENABLED, IDM_DUPSESS, "&Duplicate Session");
	    AppendMenu(m, MF_POPUP | MF_ENABLED, (UINT) s, "Sa&ved Sessions");
	    AppendMenu(m, MF_ENABLED, IDM_RECONF, "Chan&ge Settings...");
	    AppendMenu(m, MF_SEPARATOR, 0, 0);
	    AppendMenu(m, MF_ENABLED, IDM_COPYALL, "C&opy All to Clipboard");
	    AppendMenu(m, MF_ENABLED, IDM_CLRSB, "C&lear Scrollback");
	    AppendMenu(m, MF_ENABLED, IDM_RESET, "Rese&t Terminal");
	    AppendMenu(m, MF_SEPARATOR, 0, 0);
	    AppendMenu(m, (cfg.resize_action == RESIZE_DISABLED) ?
		       MF_GRAYED : MF_ENABLED, IDM_FULLSCREEN, "&Full Screen");
	    AppendMenu(m, MF_SEPARATOR, 0, 0);
	    if (help_path)
		AppendMenu(m, MF_ENABLED, IDM_HELP, "&Help");
	    str = dupprintf("&About %s", appname);
	    AppendMenu(m, MF_ENABLED, IDM_ABOUT, str);
	    sfree(str);
	}
    }

    start_backend();

    /*
     * Set up the initial input locale.
     */
    set_input_locale(GetKeyboardLayout(0));

    /*
     * Open the initial log file if there is one.
     */
    logfopen(logctx);

    /*
     * Finally show the window!
     */
    ShowWindow(hwnd, show);
    SetForegroundWindow(hwnd);

    /*
     * Set the palette up.
     */
    pal = NULL;
    logpal = NULL;
    init_palette();

    term->has_focus = (GetForegroundWindow() == hwnd);
    UpdateWindow(hwnd);

    if (GetMessage(&msg, NULL, 0, 0) == 1) {
	int timer_id = 0, long_timer = 0;

	while (msg.message != WM_QUIT) {
	    /* Sometimes DispatchMessage calls routines that use their own
	     * GetMessage loop, setup this timer so we get some control back.
	     *
	     * Also call term_update() from the timer so that if the host
	     * is sending data flat out we still do redraws.
	     */
	    if (timer_id && long_timer) {
		KillTimer(hwnd, timer_id);
		long_timer = timer_id = 0;
	    }
	    if (!timer_id)
		timer_id = SetTimer(hwnd, 1, 20, NULL);
	    if (!(IsWindow(logbox) && IsDialogMessage(logbox, &msg)))
		DispatchMessage(&msg);

	    /* Make sure we blink everything that needs it. */
	    term_blink(term, 0);

	    /* Send the paste buffer if there's anything to send */
	    term_paste(term);

	    /* If there's nothing new in the queue then we can do everything
	     * we've delayed, reading the socket, writing, and repainting
	     * the window.
	     */
	    if (PeekMessage(&msg, NULL, 0, 0, PM_REMOVE))
		continue;

	    if (pending_netevent) {
		enact_pending_netevent();

		if (PeekMessage(&msg, NULL, 0, 0, PM_REMOVE))
		    continue;
	    }

	    /* Okay there is now nothing to do so we make sure the screen is
	     * completely up to date then tell windows to call us in a little 
	     * while.
	     */
	    if (timer_id) {
		KillTimer(hwnd, timer_id);
		timer_id = 0;
	    }
	    HideCaret(hwnd);
	    if (GetCapture() != hwnd || 
		(send_raw_mouse &&
		 !(cfg.mouse_override && is_shift_pressed())))
		term_out(term);
	    term_update(term);
	    ShowCaret(hwnd);

	    flash_window(1);	       /* maintain */

	    /* The messages seem unreliable; especially if we're being tricky */
	    term->has_focus = (GetForegroundWindow() == hwnd);

	    if (term->in_vbell)
		/* Hmm, term_update didn't want to do an update too soon ... */
		timer_id = SetTimer(hwnd, 1, 50, NULL);
	    else if (!term->has_focus)
		timer_id = SetTimer(hwnd, 1, 500, NULL);
	    else
		timer_id = SetTimer(hwnd, 1, 100, NULL);
	    long_timer = 1;

	    /* There's no point rescanning everything in the message queue
	     * so we do an apparently unnecessary wait here
	     */
	    WaitMessage();
	    if (GetMessage(&msg, NULL, 0, 0) != 1)
		break;
	}
    }

    cleanup_exit(msg.wParam);	       /* this doesn't return... */
    return msg.wParam;		       /* ... but optimiser doesn't know */
}

/*
 * Clean up and exit.
 */
void cleanup_exit(int code)
{
    /*
     * Clean up.
     */
    deinit_fonts();
    sfree(logpal);
    if (pal)
	DeleteObject(pal);
    sk_cleanup();

    if (cfg.protocol == PROT_SSH) {
	random_save_seed();
#ifdef MSCRYPTOAPI
	crypto_wrapup();
#endif
    }

    exit(code);
}

/*
 * Set up, or shut down, an AsyncSelect. Called from winnet.c.
 */
char *do_select(SOCKET skt, int startup)
{
    int msg, events;
    if (startup) {
	msg = WM_NETEVENT;
	events = (FD_CONNECT | FD_READ | FD_WRITE |
		  FD_OOB | FD_CLOSE | FD_ACCEPT);
    } else {
	msg = events = 0;
    }
    if (!hwnd)
	return "do_select(): internal error (hwnd==NULL)";
    if (p_WSAAsyncSelect(skt, hwnd, msg, events) == SOCKET_ERROR) {
	switch (p_WSAGetLastError()) {
	  case WSAENETDOWN:
	    return "Network is down";
	  default:
	    return "WSAAsyncSelect(): unknown error";
	}
    }
    return NULL;
}

/*
 * Update the Special Commands submenu.
 */
void update_specials_menu(void *frontend)
{
    HMENU p;
    int menu_already_exists = (specials != NULL);
    int i, j;

    if (back)
	specials = back->get_specials(backhandle);
    else
	specials = NULL;

    if (specials) {
	/* We can't use Windows to provide a stack for submenus, so
	 * here's a lame "stack" that will do for now. */
	HMENU saved_menu = NULL;
	int nesting = 1;
	p = CreatePopupMenu();
	for (i = 0; nesting > 0; i++) {
	    assert(IDM_SPECIAL_MIN + 0x10 * i < IDM_SPECIAL_MAX);
	    switch (specials[i].code) {
	      case TS_SEP:
		AppendMenu(p, MF_SEPARATOR, 0, 0);
		break;
	      case TS_SUBMENU:
		assert(nesting < 2);
		nesting++;
		saved_menu = p; /* XXX lame stacking */
		p = CreatePopupMenu();
		AppendMenu(saved_menu, MF_POPUP | MF_ENABLED,
			   (UINT) p, specials[i].name);
		break;
	      case TS_EXITMENU:
		nesting--;
		if (nesting) {
		    p = saved_menu; /* XXX lame stacking */
		    saved_menu = NULL;
		}
		break;
	      default:
		AppendMenu(p, MF_ENABLED, IDM_SPECIAL_MIN + 0x10 * i,
			   specials[i].name);
		break;
	    }
	}
	/* Squirrel the highest special. */
	n_specials = i - 1;
    } else {
	p = NULL;
	n_specials = 0;
    }

    for (j = 0; j < lenof(popup_menus); j++) {
	if (menu_already_exists) {
	    /* XXX does this free up all submenus? */
	    DeleteMenu(popup_menus[j].menu,
		       popup_menus[j].specials_submenu_pos,
		       MF_BYPOSITION);
	    DeleteMenu(popup_menus[j].menu,
		       popup_menus[j].specials_submenu_pos,
		       MF_BYPOSITION);
	}
	if (specials) {
	    InsertMenu(popup_menus[j].menu,
		       popup_menus[j].specials_submenu_pos,
		       MF_BYPOSITION | MF_SEPARATOR, 0, 0);
	    InsertMenu(popup_menus[j].menu,
		       popup_menus[j].specials_submenu_pos,
		       MF_BYPOSITION | MF_POPUP | MF_ENABLED,
		       (UINT) p, "S&pecial Command");
	}
    }
}

/*
 * set or clear the "raw mouse message" mode
 */
void set_raw_mouse_mode(void *frontend, int activate)
{
    activate = activate && !cfg.no_mouse_rep;
    send_raw_mouse = activate;
    SetCursor(LoadCursor(NULL, activate ? IDC_ARROW : IDC_IBEAM));
}

/*
 * Print a message box and close the connection.
 */
void connection_fatal(void *frontend, char *fmt, ...)
{
    va_list ap;
    char *stuff, morestuff[100];

    va_start(ap, fmt);
    stuff = dupvprintf(fmt, ap);
    va_end(ap);
    sprintf(morestuff, "%.70s Fatal Error", appname);
    MessageBox(hwnd, stuff, morestuff, MB_ICONERROR | MB_OK);
    sfree(stuff);

    if (cfg.close_on_exit == FORCE_ON)
	PostQuitMessage(1);
    else {
	close_session();
    }
}

/*
 * Report an error at the command-line parsing stage.
 */
void cmdline_error(char *fmt, ...)
{
    va_list ap;
    char *stuff, morestuff[100];

    va_start(ap, fmt);
    stuff = dupvprintf(fmt, ap);
    va_end(ap);
    sprintf(morestuff, "%.70s Command Line Error", appname);
    MessageBox(hwnd, stuff, morestuff, MB_ICONERROR | MB_OK);
    sfree(stuff);
    exit(1);
}

/*
 * Actually do the job requested by a WM_NETEVENT
 */
static void enact_pending_netevent(void)
{
    static int reentering = 0;
    extern int select_result(WPARAM, LPARAM);
    int ret;

    if (reentering)
	return;			       /* don't unpend the pending */

    pending_netevent = FALSE;

    reentering = 1;
    ret = select_result(pend_netevent_wParam, pend_netevent_lParam);
    reentering = 0;

    if (ret == 0 && !session_closed) {
	/* Abnormal exits will already have set session_closed and taken
	 * appropriate action. */
	if (cfg.close_on_exit == FORCE_ON ||
	    cfg.close_on_exit == AUTO) PostQuitMessage(0);
	else {
	    close_session();
	    session_closed = TRUE;
	    MessageBox(hwnd, "Connection closed by remote host",
		       appname, MB_OK | MB_ICONINFORMATION);
	}
    }
}

/*
 * Copy the colour palette from the configuration data into defpal.
 * This is non-trivial because the colour indices are different.
 */
static void cfgtopalette(void)
{
    int i;
    static const int ww[] = {
	6, 7, 8, 9, 10, 11, 12, 13,
	14, 15, 16, 17, 18, 19, 20, 21,
	0, 1, 2, 3, 4, 4, 5, 5
    };

    for (i = 0; i < 24; i++) {
	int w = ww[i];
	defpal[i].rgbtRed = cfg.colours[w][0];
	defpal[i].rgbtGreen = cfg.colours[w][1];
	defpal[i].rgbtBlue = cfg.colours[w][2];
    }

    /* Override with system colours if appropriate */
    if (cfg.system_colour)
        systopalette();
}

/*
 * Override bit of defpal with colours from the system.
 * (NB that this takes a copy the system colours at the time this is called,
 * so subsequent colour scheme changes don't take effect. To fix that we'd
 * probably want to be using GetSysColorBrush() and the like.)
 */
static void systopalette(void)
{
    int i;
    static const struct { int nIndex; int norm; int bold; } or[] =
    {
	{ COLOR_WINDOWTEXT,	16, 17 }, /* Default Foreground */
	{ COLOR_WINDOW,		18, 19 }, /* Default Background */
	{ COLOR_HIGHLIGHTTEXT,	20, 21 }, /* Cursor Text */
	{ COLOR_HIGHLIGHT,	22, 23 }, /* Cursor Colour */
    };

    for (i = 0; i < (sizeof(or)/sizeof(or[0])); i++) {
	COLORREF colour = GetSysColor(or[i].nIndex);
	defpal[or[i].norm].rgbtRed =
	   defpal[or[i].bold].rgbtRed = GetRValue(colour);
	defpal[or[i].norm].rgbtGreen =
	   defpal[or[i].bold].rgbtGreen = GetGValue(colour);
	defpal[or[i].norm].rgbtBlue =
	   defpal[or[i].bold].rgbtBlue = GetBValue(colour);
    }
}

/*
 * Set up the colour palette.
 */
static void init_palette(void)
{
    int i;
    HDC hdc = GetDC(hwnd);
    if (hdc) {
	if (cfg.try_palette && GetDeviceCaps(hdc, RASTERCAPS) & RC_PALETTE) {
	    /*
	     * This is a genuine case where we must use smalloc
	     * because the snew macros can't cope.
	     */
	    logpal = smalloc(sizeof(*logpal)
			     - sizeof(logpal->palPalEntry)
			     + NCOLOURS * sizeof(PALETTEENTRY));
	    logpal->palVersion = 0x300;
	    logpal->palNumEntries = NCOLOURS;
	    for (i = 0; i < NCOLOURS; i++) {
		logpal->palPalEntry[i].peRed = defpal[i].rgbtRed;
		logpal->palPalEntry[i].peGreen = defpal[i].rgbtGreen;
		logpal->palPalEntry[i].peBlue = defpal[i].rgbtBlue;
		logpal->palPalEntry[i].peFlags = PC_NOCOLLAPSE;
	    }
	    pal = CreatePalette(logpal);
	    if (pal) {
		SelectPalette(hdc, pal, FALSE);
		RealizePalette(hdc);
		SelectPalette(hdc, GetStockObject(DEFAULT_PALETTE), FALSE);
	    }
	}
	ReleaseDC(hwnd, hdc);
    }
    if (pal)
	for (i = 0; i < NCOLOURS; i++)
	    colours[i] = PALETTERGB(defpal[i].rgbtRed,
				    defpal[i].rgbtGreen,
				    defpal[i].rgbtBlue);
    else
	for (i = 0; i < NCOLOURS; i++)
	    colours[i] = RGB(defpal[i].rgbtRed,
			     defpal[i].rgbtGreen, defpal[i].rgbtBlue);
}

/*
 * Initialise all the fonts we will need initially. There may be as many as
 * three or as few as one.  The other (poentially) twentyone fonts are done
 * if/when they are needed.
 *
 * We also:
 *
 * - check the font width and height, correcting our guesses if
 *   necessary.
 *
 * - verify that the bold font is the same width as the ordinary
 *   one, and engage shadow bolding if not.
 * 
 * - verify that the underlined font is the same width as the
 *   ordinary one (manual underlining by means of line drawing can
 *   be done in a pinch).
 */
static void init_fonts(int pick_width, int pick_height)
{
    TEXTMETRIC tm;
    CPINFO cpinfo;
    int fontsize[3];
    int i;
    HDC hdc;
    int fw_dontcare, fw_bold;

    for (i = 0; i < FONT_MAXNO; i++)
	fonts[i] = NULL;

    bold_mode = cfg.bold_colour ? BOLD_COLOURS : BOLD_FONT;
    und_mode = UND_FONT;

    if (cfg.font.isbold) {
	fw_dontcare = FW_BOLD;
	fw_bold = FW_HEAVY;
    } else {
	fw_dontcare = FW_DONTCARE;
	fw_bold = FW_BOLD;
    }

    hdc = GetDC(hwnd);

    if (pick_height)
	font_height = pick_height;
    else {
	font_height = cfg.font.height;
	if (font_height > 0) {
	    font_height =
		-MulDiv(font_height, GetDeviceCaps(hdc, LOGPIXELSY), 72);
	}
    }
    font_width = pick_width;

#define f(i,c,w,u) \
    fonts[i] = CreateFont (font_height, font_width, 0, 0, w, FALSE, u, FALSE, \
			   c, OUT_DEFAULT_PRECIS, \
		           CLIP_DEFAULT_PRECIS, DEFAULT_QUALITY, \
			   FIXED_PITCH | FF_DONTCARE, cfg.font.name)

    f(FONT_NORMAL, cfg.font.charset, fw_dontcare, FALSE);

    lfont.lfHeight = font_height;
    lfont.lfWidth = font_width;
    lfont.lfEscapement = 0;
    lfont.lfOrientation  = 0;
    lfont.lfWeight  = fw_dontcare;
    lfont.lfItalic = FALSE;
    lfont.lfUnderline = FALSE;
    lfont.lfStrikeOut = FALSE;
    lfont.lfCharSet = cfg.font.charset;
    lfont.lfOutPrecision = OUT_DEFAULT_PRECIS;
    lfont.lfClipPrecision = CLIP_DEFAULT_PRECIS;
    lfont.lfQuality = DEFAULT_QUALITY;
    lfont.lfPitchAndFamily = FIXED_PITCH | FF_DONTCARE;
    strncpy(lfont.lfFaceName, cfg.font.name, LF_FACESIZE);

    SelectObject(hdc, fonts[FONT_NORMAL]);
    GetTextMetrics(hdc, &tm);

    if (pick_width == 0 || pick_height == 0) {
	font_height = tm.tmHeight;
	font_width = tm.tmAveCharWidth;
    }
    font_dualwidth = (tm.tmAveCharWidth != tm.tmMaxCharWidth);

#ifdef RDB_DEBUG_PATCH
    debug(23, "Primary font H=%d, AW=%d, MW=%d",
	    tm.tmHeight, tm.tmAveCharWidth, tm.tmMaxCharWidth);
#endif

    {
	CHARSETINFO info;
	DWORD cset = tm.tmCharSet;
	memset(&info, 0xFF, sizeof(info));

	/* !!! Yes the next line is right */
	if (cset == OEM_CHARSET)
	    ucsdata.font_codepage = GetOEMCP();
	else
	    if (TranslateCharsetInfo ((DWORD *) cset, &info, TCI_SRCCHARSET))
		ucsdata.font_codepage = info.ciACP;
	else
	    ucsdata.font_codepage = -1;

	GetCPInfo(ucsdata.font_codepage, &cpinfo);
	ucsdata.dbcs_screenfont = (cpinfo.MaxCharSize > 1);
    }

    f(FONT_UNDERLINE, cfg.font.charset, fw_dontcare, TRUE);

    /*
     * Some fonts, e.g. 9-pt Courier, draw their underlines
     * outside their character cell. We successfully prevent
     * screen corruption by clipping the text output, but then
     * we lose the underline completely. Here we try to work
     * out whether this is such a font, and if it is, we set a
     * flag that causes underlines to be drawn by hand.
     *
     * Having tried other more sophisticated approaches (such
     * as examining the TEXTMETRIC structure or requesting the
     * height of a string), I think we'll do this the brute
     * force way: we create a small bitmap, draw an underlined
     * space on it, and test to see whether any pixels are
     * foreground-coloured. (Since we expect the underline to
     * go all the way across the character cell, we only search
     * down a single column of the bitmap, half way across.)
     */
    {
	HDC und_dc;
	HBITMAP und_bm, und_oldbm;
	int i, gotit;
	COLORREF c;

	und_dc = CreateCompatibleDC(hdc);
	und_bm = CreateCompatibleBitmap(hdc, font_width, font_height);
	und_oldbm = SelectObject(und_dc, und_bm);
	SelectObject(und_dc, fonts[FONT_UNDERLINE]);
	SetTextAlign(und_dc, TA_TOP | TA_LEFT | TA_NOUPDATECP);
	SetTextColor(und_dc, RGB(255, 255, 255));
	SetBkColor(und_dc, RGB(0, 0, 0));
	SetBkMode(und_dc, OPAQUE);
	ExtTextOut(und_dc, 0, 0, ETO_OPAQUE, NULL, " ", 1, NULL);
	gotit = FALSE;
	for (i = 0; i < font_height; i++) {
	    c = GetPixel(und_dc, font_width / 2, i);
	    if (c != RGB(0, 0, 0))
		gotit = TRUE;
	}
	SelectObject(und_dc, und_oldbm);
	DeleteObject(und_bm);
	DeleteDC(und_dc);
	if (!gotit) {
	    und_mode = UND_LINE;
	    DeleteObject(fonts[FONT_UNDERLINE]);
	    fonts[FONT_UNDERLINE] = 0;
	}
    }

    if (bold_mode == BOLD_FONT) {
	f(FONT_BOLD, cfg.font.charset, fw_bold, FALSE);
    }
#undef f

    descent = tm.tmAscent + 1;
    if (descent >= font_height)
	descent = font_height - 1;

    for (i = 0; i < 3; i++) {
	if (fonts[i]) {
	    if (SelectObject(hdc, fonts[i]) && GetTextMetrics(hdc, &tm))
		fontsize[i] = tm.tmAveCharWidth + 256 * tm.tmHeight;
	    else
		fontsize[i] = -i;
	} else
	    fontsize[i] = -i;
    }

    ReleaseDC(hwnd, hdc);

    if (fontsize[FONT_UNDERLINE] != fontsize[FONT_NORMAL]) {
	und_mode = UND_LINE;
	DeleteObject(fonts[FONT_UNDERLINE]);
	fonts[FONT_UNDERLINE] = 0;
    }

    if (bold_mode == BOLD_FONT &&
	fontsize[FONT_BOLD] != fontsize[FONT_NORMAL]) {
	bold_mode = BOLD_SHADOW;
	DeleteObject(fonts[FONT_BOLD]);
	fonts[FONT_BOLD] = 0;
    }
    fontflag[0] = fontflag[1] = fontflag[2] = 1;

    init_ucs(&cfg, &ucsdata);
}

static void another_font(int fontno)
{
    int basefont;
    int fw_dontcare, fw_bold;
    int c, u, w, x;
    char *s;

    if (fontno < 0 || fontno >= FONT_MAXNO || fontflag[fontno])
	return;

    basefont = (fontno & ~(FONT_BOLDUND));
    if (basefont != fontno && !fontflag[basefont])
	another_font(basefont);

    if (cfg.font.isbold) {
	fw_dontcare = FW_BOLD;
	fw_bold = FW_HEAVY;
    } else {
	fw_dontcare = FW_DONTCARE;
	fw_bold = FW_BOLD;
    }

    c = cfg.font.charset;
    w = fw_dontcare;
    u = FALSE;
    s = cfg.font.name;
    x = font_width;

    if (fontno & FONT_WIDE)
	x *= 2;
    if (fontno & FONT_NARROW)
	x = (x+1)/2;
    if (fontno & FONT_OEM)
	c = OEM_CHARSET;
    if (fontno & FONT_BOLD)
	w = fw_bold;
    if (fontno & FONT_UNDERLINE)
	u = TRUE;

    fonts[fontno] =
	CreateFont(font_height * (1 + !!(fontno & FONT_HIGH)), x, 0, 0, w,
		   FALSE, u, FALSE, c, OUT_DEFAULT_PRECIS,
		   CLIP_DEFAULT_PRECIS, DEFAULT_QUALITY,
		   FIXED_PITCH | FF_DONTCARE, s);

    fontflag[fontno] = 1;
}

static void deinit_fonts(void)
{
    int i;
    for (i = 0; i < FONT_MAXNO; i++) {
	if (fonts[i])
	    DeleteObject(fonts[i]);
	fonts[i] = 0;
	fontflag[i] = 0;
    }
}

void request_resize(void *frontend, int w, int h)
{
    int width, height;

    /* If the window is maximized supress resizing attempts */
    if (IsZoomed(hwnd)) {
	if (cfg.resize_action == RESIZE_TERM)
	    return;
    }

    if (cfg.resize_action == RESIZE_DISABLED) return;
    if (h == term->rows && w == term->cols) return;

    /* Sanity checks ... */
    {
	static int first_time = 1;
	static RECT ss;

	switch (first_time) {
	  case 1:
	    /* Get the size of the screen */
	    if (get_fullscreen_rect(&ss))
		/* first_time = 0 */ ;
	    else {
		first_time = 2;
		break;
	    }
	  case 0:
	    /* Make sure the values are sane */
	    width = (ss.right - ss.left - extra_width) / 4;
	    height = (ss.bottom - ss.top - extra_height) / 6;

	    if (w > width || h > height)
		return;
	    if (w < 15)
		w = 15;
	    if (h < 1)
		h = 1;
	}
    }

    term_size(term, h, w, cfg.savelines);

    if (cfg.resize_action != RESIZE_FONT && !IsZoomed(hwnd)) {
	width = extra_width + font_width * w;
	height = extra_height + font_height * h;

	SetWindowPos(hwnd, NULL, 0, 0, width, height,
	    SWP_NOACTIVATE | SWP_NOCOPYBITS |
	    SWP_NOMOVE | SWP_NOZORDER);
    } else
	reset_window(0);

    InvalidateRect(hwnd, NULL, TRUE);
}

static void reset_window(int reinit) {
    /*
     * This function decides how to resize or redraw when the 
     * user changes something. 
     *
     * This function doesn't like to change the terminal size but if the
     * font size is locked that may be it's only soluion.
     */
    int win_width, win_height;
    RECT cr, wr;

#ifdef RDB_DEBUG_PATCH
    debug((27, "reset_window()"));
#endif

    /* Current window sizes ... */
    GetWindowRect(hwnd, &wr);
    GetClientRect(hwnd, &cr);

    win_width  = cr.right - cr.left;
    win_height = cr.bottom - cr.top;

    if (cfg.resize_action == RESIZE_DISABLED) reinit = 2;

    /* Are we being forced to reload the fonts ? */
    if (reinit>1) {
#ifdef RDB_DEBUG_PATCH
	debug((27, "reset_window() -- Forced deinit"));
#endif
	deinit_fonts();
	init_fonts(0,0);
    }

    /* Oh, looks like we're minimised */
    if (win_width == 0 || win_height == 0)
	return;

    /* Is the window out of position ? */
    if ( !reinit && 
	    (offset_width != (win_width-font_width*term->cols)/2 ||
	     offset_height != (win_height-font_height*term->rows)/2) ){
	offset_width = (win_width-font_width*term->cols)/2;
	offset_height = (win_height-font_height*term->rows)/2;
	InvalidateRect(hwnd, NULL, TRUE);
#ifdef RDB_DEBUG_PATCH
	debug((27, "reset_window() -> Reposition terminal"));
#endif
    }

    if (IsZoomed(hwnd)) {
	/* We're fullscreen, this means we must not change the size of
	 * the window so it's the font size or the terminal itself.
	 */

	extra_width = wr.right - wr.left - cr.right + cr.left;
	extra_height = wr.bottom - wr.top - cr.bottom + cr.top;

	if (cfg.resize_action != RESIZE_TERM) {
	    if (  font_width != win_width/term->cols || 
		  font_height != win_height/term->rows) {
		deinit_fonts();
		init_fonts(win_width/term->cols, win_height/term->rows);
		offset_width = (win_width-font_width*term->cols)/2;
		offset_height = (win_height-font_height*term->rows)/2;
		InvalidateRect(hwnd, NULL, TRUE);
#ifdef RDB_DEBUG_PATCH
		debug((25, "reset_window() -> Z font resize to (%d, %d)",
			font_width, font_height));
#endif
	    }
	} else {
	    if (  font_width != win_width/term->cols || 
		  font_height != win_height/term->rows) {
		/* Our only choice at this point is to change the 
		 * size of the terminal; Oh well.
		 */
		term_size(term, win_height/font_height, win_width/font_width,
			  cfg.savelines);
		offset_width = (win_width-font_width*term->cols)/2;
		offset_height = (win_height-font_height*term->rows)/2;
		InvalidateRect(hwnd, NULL, TRUE);
#ifdef RDB_DEBUG_PATCH
		debug((27, "reset_window() -> Zoomed term_size"));
#endif
	    }
	}
	return;
    }

    /* Hmm, a force re-init means we should ignore the current window
     * so we resize to the default font size.
     */
    if (reinit>0) {
#ifdef RDB_DEBUG_PATCH
	debug((27, "reset_window() -> Forced re-init"));
#endif

	offset_width = offset_height = cfg.window_border;
	extra_width = wr.right - wr.left - cr.right + cr.left + offset_width*2;
	extra_height = wr.bottom - wr.top - cr.bottom + cr.top +offset_height*2;

	if (win_width != font_width*term->cols + offset_width*2 ||
	    win_height != font_height*term->rows + offset_height*2) {

	    /* If this is too large windows will resize it to the maximum
	     * allowed window size, we will then be back in here and resize
	     * the font or terminal to fit.
	     */
	    SetWindowPos(hwnd, NULL, 0, 0, 
		         font_width*term->cols + extra_width, 
			 font_height*term->rows + extra_height,
			 SWP_NOMOVE | SWP_NOZORDER);
	}

	InvalidateRect(hwnd, NULL, TRUE);
	return;
    }

    /* Okay the user doesn't want us to change the font so we try the 
     * window. But that may be too big for the screen which forces us
     * to change the terminal.
     */
    if ((cfg.resize_action == RESIZE_TERM && reinit<=0) ||
        (cfg.resize_action == RESIZE_EITHER && reinit<0) ||
	    reinit>0) {
	offset_width = offset_height = cfg.window_border;
	extra_width = wr.right - wr.left - cr.right + cr.left + offset_width*2;
	extra_height = wr.bottom - wr.top - cr.bottom + cr.top +offset_height*2;

	if (win_width != font_width*term->cols + offset_width*2 ||
	    win_height != font_height*term->rows + offset_height*2) {

	    static RECT ss;
	    int width, height;
		
		get_fullscreen_rect(&ss);

	    width = (ss.right - ss.left - extra_width) / font_width;
	    height = (ss.bottom - ss.top - extra_height) / font_height;

	    /* Grrr too big */
	    if ( term->rows > height || term->cols > width ) {
		if (cfg.resize_action == RESIZE_EITHER) {
		    /* Make the font the biggest we can */
		    if (term->cols > width)
			font_width = (ss.right - ss.left - extra_width)
			    / term->cols;
		    if (term->rows > height)
			font_height = (ss.bottom - ss.top - extra_height)
			    / term->rows;

		    deinit_fonts();
		    init_fonts(font_width, font_height);

		    width = (ss.right - ss.left - extra_width) / font_width;
		    height = (ss.bottom - ss.top - extra_height) / font_height;
		} else {
		    if ( height > term->rows ) height = term->rows;
		    if ( width > term->cols )  width = term->cols;
		    term_size(term, height, width, cfg.savelines);
#ifdef RDB_DEBUG_PATCH
		    debug((27, "reset_window() -> term resize to (%d,%d)",
			       height, width));
#endif
		}
	    }
	    
	    SetWindowPos(hwnd, NULL, 0, 0, 
		         font_width*term->cols + extra_width, 
			 font_height*term->rows + extra_height,
			 SWP_NOMOVE | SWP_NOZORDER);

	    InvalidateRect(hwnd, NULL, TRUE);
#ifdef RDB_DEBUG_PATCH
	    debug((27, "reset_window() -> window resize to (%d,%d)",
			font_width*term->cols + extra_width,
			font_height*term->rows + extra_height));
#endif
	}
	return;
    }

    /* We're allowed to or must change the font but do we want to ?  */

    if (font_width != (win_width-cfg.window_border*2)/term->cols || 
	font_height != (win_height-cfg.window_border*2)/term->rows) {

	deinit_fonts();
	init_fonts((win_width-cfg.window_border*2)/term->cols, 
		   (win_height-cfg.window_border*2)/term->rows);
	offset_width = (win_width-font_width*term->cols)/2;
	offset_height = (win_height-font_height*term->rows)/2;

	extra_width = wr.right - wr.left - cr.right + cr.left +offset_width*2;
	extra_height = wr.bottom - wr.top - cr.bottom + cr.top+offset_height*2;

	InvalidateRect(hwnd, NULL, TRUE);
#ifdef RDB_DEBUG_PATCH
	debug((25, "reset_window() -> font resize to (%d,%d)", 
		   font_width, font_height));
#endif
    }
}

static void set_input_locale(HKL kl)
{
    char lbuf[20];

    GetLocaleInfo(LOWORD(kl), LOCALE_IDEFAULTANSICODEPAGE,
		  lbuf, sizeof(lbuf));

    kbd_codepage = atoi(lbuf);
}

static void click(Mouse_Button b, int x, int y, int shift, int ctrl, int alt)
{
    int thistime = GetMessageTime();

    if (send_raw_mouse && !(cfg.mouse_override && shift)) {
	lastbtn = MBT_NOTHING;
	term_mouse(term, b, translate_button(b), MA_CLICK,
		   x, y, shift, ctrl, alt);
	return;
    }

    if (lastbtn == b && thistime - lasttime < dbltime) {
	lastact = (lastact == MA_CLICK ? MA_2CLK :
		   lastact == MA_2CLK ? MA_3CLK :
		   lastact == MA_3CLK ? MA_CLICK : MA_NOTHING);
    } else {
	lastbtn = b;
	lastact = MA_CLICK;
    }
    if (lastact != MA_NOTHING)
	term_mouse(term, b, translate_button(b), lastact,
		   x, y, shift, ctrl, alt);
    lasttime = thistime;
}

/*
 * Translate a raw mouse button designation (LEFT, MIDDLE, RIGHT)
 * into a cooked one (SELECT, EXTEND, PASTE).
 */
static Mouse_Button translate_button(Mouse_Button button)
{
    if (button == MBT_LEFT)
	return MBT_SELECT;
    if (button == MBT_MIDDLE)
	return cfg.mouse_is_xterm == 1 ? MBT_PASTE : MBT_EXTEND;
    if (button == MBT_RIGHT)
	return cfg.mouse_is_xterm == 1 ? MBT_EXTEND : MBT_PASTE;
    return 0;			       /* shouldn't happen */
}

static void show_mouseptr(int show)
{
    static int cursor_visible = 1;
    if (!cfg.hide_mouseptr)	       /* override if this feature disabled */
	show = 1;
    if (cursor_visible && !show)
	ShowCursor(FALSE);
    else if (!cursor_visible && show)
	ShowCursor(TRUE);
    cursor_visible = show;
}

static int is_alt_pressed(void)
{
    BYTE keystate[256];
    int r = GetKeyboardState(keystate);
    if (!r)
	return FALSE;
    if (keystate[VK_MENU] & 0x80)
	return TRUE;
    if (keystate[VK_RMENU] & 0x80)
	return TRUE;
    return FALSE;
}

static int is_shift_pressed(void)
{
    BYTE keystate[256];
    int r = GetKeyboardState(keystate);
    if (!r)
	return FALSE;
    if (keystate[VK_SHIFT] & 0x80)
	return TRUE;
    return FALSE;
}

static int resizing;

static LRESULT CALLBACK WndProc(HWND hwnd, UINT message,
				WPARAM wParam, LPARAM lParam)
{
    HDC hdc;
    static int ignore_clip = FALSE;
    static int need_backend_resize = FALSE;
    static int fullscr_on_max = FALSE;
    static UINT last_mousemove = 0;

    switch (message) {
      case WM_TIMER:
	if (pending_netevent)
	    enact_pending_netevent();
	if (GetCapture() != hwnd || 
	    (send_raw_mouse && !(cfg.mouse_override && is_shift_pressed())))
	    term_out(term);
	noise_regular();
	HideCaret(hwnd);
	term_update(term);
	ShowCaret(hwnd);
	if (cfg.ping_interval > 0) {
	    time_t now;
	    time(&now);
	    if (now - last_movement > cfg.ping_interval) {
		if (back)
		    back->special(backhandle, TS_PING);
		last_movement = now;
	    }
	}
	net_pending_errors();
	return 0;
      case WM_CREATE:
	break;
      case WM_CLOSE:
	{
	    char *str;
	    show_mouseptr(1);
	    str = dupprintf("%s Exit Confirmation", appname);
	    if (!cfg.warn_on_close || session_closed ||
		MessageBox(hwnd,
			   "Are you sure you want to close this session?",
			   str, MB_ICONWARNING | MB_OKCANCEL) == IDOK)
		DestroyWindow(hwnd);
	    sfree(str);
	}
	return 0;
      case WM_DESTROY:
	show_mouseptr(1);
	PostQuitMessage(0);
	return 0;
      case WM_COMMAND:
      case WM_SYSCOMMAND:
	switch (wParam & ~0xF) {       /* low 4 bits reserved to Windows */
	  case IDM_SHOWLOG:
	    showeventlog(hwnd);
	    break;
	  case IDM_NEWSESS:
	  case IDM_DUPSESS:
	  case IDM_SAVEDSESS:
	    {
		char b[2048];
		char c[30], *cl;
		int freecl = FALSE;
		STARTUPINFO si;
		PROCESS_INFORMATION pi;
		HANDLE filemap = NULL;

		if (wParam == IDM_DUPSESS) {
		    /*
		     * Allocate a file-mapping memory chunk for the
		     * config structure.
		     */
		    SECURITY_ATTRIBUTES sa;
		    Config *p;

		    sa.nLength = sizeof(sa);
		    sa.lpSecurityDescriptor = NULL;
		    sa.bInheritHandle = TRUE;
		    filemap = CreateFileMapping((HANDLE) 0xFFFFFFFF,
						&sa,
						PAGE_READWRITE,
						0, sizeof(Config), NULL);
		    if (filemap) {
			p = (Config *) MapViewOfFile(filemap,
						     FILE_MAP_WRITE,
						     0, 0, sizeof(Config));
			if (p) {
			    *p = cfg;  /* structure copy */
			    UnmapViewOfFile(p);
			}
		    }
		    sprintf(c, "putty &%p", filemap);
		    cl = c;
		} else if (wParam == IDM_SAVEDSESS) {
		    if ((lParam - IDM_SAVED_MIN) / 16 < sesslist.nsessions) {
			char *session =
			    sesslist.sessions[(lParam - IDM_SAVED_MIN) / 16];
			cl = snewn(16 + strlen(session), char);
				       /* 8, but play safe */
			if (!cl)
			    cl = NULL;    
				       /* not a very important failure mode */
			else {
			    sprintf(cl, "putty @%s", session);
			    freecl = TRUE;
			}
		    } else
			break;
		} else
		    cl = NULL;

		GetModuleFileName(NULL, b, sizeof(b) - 1);
		si.cb = sizeof(si);
		si.lpReserved = NULL;
		si.lpDesktop = NULL;
		si.lpTitle = NULL;
		si.dwFlags = 0;
		si.cbReserved2 = 0;
		si.lpReserved2 = NULL;
		CreateProcess(b, cl, NULL, NULL, TRUE,
			      NORMAL_PRIORITY_CLASS, NULL, NULL, &si, &pi);

		if (filemap)
		    CloseHandle(filemap);
		if (freecl)
		    sfree(cl);
	    }
	    break;
	  case IDM_RESTART:
	    if (!back) {
		logevent(NULL, "----- Session restarted -----");
		start_backend();
	    }

	    break;
	  case IDM_RECONF:
	    {
		Config prev_cfg;
		int init_lvl = 1;

		GetWindowText(hwnd, cfg.wintitle, sizeof(cfg.wintitle));
		prev_cfg = cfg;

		if (!do_reconfig(hwnd))
		    break;

		{
		    /* Disable full-screen if resizing forbidden */
		    HMENU m = GetSystemMenu (hwnd, FALSE);
		    EnableMenuItem(m, IDM_FULLSCREEN, MF_BYCOMMAND | 
				   (cfg.resize_action == RESIZE_DISABLED)
				   ? MF_GRAYED : MF_ENABLED);
		    /* Gracefully unzoom if necessary */
		    if (IsZoomed(hwnd) &&
			(cfg.resize_action == RESIZE_DISABLED)) {
			ShowWindow(hwnd, SW_RESTORE);
		    }
		}

		/* Pass new config data to the logging module */
		log_reconfig(logctx, &cfg);

		sfree(logpal);
		/*
		 * Flush the line discipline's edit buffer in the
		 * case where local editing has just been disabled.
		 */
		if (ldisc)
		    ldisc_send(ldisc, NULL, 0, 0);
		if (pal)
		    DeleteObject(pal);
		logpal = NULL;
		pal = NULL;
		cfgtopalette();
		init_palette();

		/* Pass new config data to the terminal */
		term_reconfig(term, &cfg);

		/* Pass new config data to the back end */
		if (back)
		    back->reconfig(backhandle, &cfg);

		/* Screen size changed ? */
		if (cfg.height != prev_cfg.height ||
		    cfg.width != prev_cfg.width ||
		    cfg.savelines != prev_cfg.savelines ||
		    cfg.resize_action == RESIZE_FONT ||
		    (cfg.resize_action == RESIZE_EITHER && IsZoomed(hwnd)) ||
		    cfg.resize_action == RESIZE_DISABLED)
		    term_size(term, cfg.height, cfg.width, cfg.savelines);

		/* Enable or disable the scroll bar, etc */
		{
		    LONG nflg, flag = GetWindowLong(hwnd, GWL_STYLE);
		    LONG nexflag, exflag =
			GetWindowLong(hwnd, GWL_EXSTYLE);

		    nexflag = exflag;
		    if (cfg.alwaysontop != prev_cfg.alwaysontop) {
			if (cfg.alwaysontop) {
			    nexflag |= WS_EX_TOPMOST;
			    SetWindowPos(hwnd, HWND_TOPMOST, 0, 0, 0, 0,
					 SWP_NOMOVE | SWP_NOSIZE);
			} else {
			    nexflag &= ~(WS_EX_TOPMOST);
			    SetWindowPos(hwnd, HWND_NOTOPMOST, 0, 0, 0, 0,
					 SWP_NOMOVE | SWP_NOSIZE);
			}
		    }
		    if (cfg.sunken_edge)
			nexflag |= WS_EX_CLIENTEDGE;
		    else
			nexflag &= ~(WS_EX_CLIENTEDGE);

		    nflg = flag;
		    if (is_full_screen() ?
			cfg.scrollbar_in_fullscreen : cfg.scrollbar)
			nflg |= WS_VSCROLL;
		    else
			nflg &= ~WS_VSCROLL;

		    if (cfg.resize_action == RESIZE_DISABLED ||
                        is_full_screen())
			nflg &= ~WS_THICKFRAME;
		    else
			nflg |= WS_THICKFRAME;

		    if (cfg.resize_action == RESIZE_DISABLED)
			nflg &= ~WS_MAXIMIZEBOX;
		    else
			nflg |= WS_MAXIMIZEBOX;

		    if (nflg != flag || nexflag != exflag) {
			if (nflg != flag)
			    SetWindowLong(hwnd, GWL_STYLE, nflg);
			if (nexflag != exflag)
			    SetWindowLong(hwnd, GWL_EXSTYLE, nexflag);

			SetWindowPos(hwnd, NULL, 0, 0, 0, 0,
				     SWP_NOACTIVATE | SWP_NOCOPYBITS |
				     SWP_NOMOVE | SWP_NOSIZE | SWP_NOZORDER |
				     SWP_FRAMECHANGED);

			init_lvl = 2;
		    }
		}

		/* Oops */
		if (cfg.resize_action == RESIZE_DISABLED && IsZoomed(hwnd)) {
		    force_normal(hwnd);
		    init_lvl = 2;
		}

		set_title(NULL, cfg.wintitle);
		if (IsIconic(hwnd)) {
		    SetWindowText(hwnd,
				  cfg.win_name_always ? window_name :
				  icon_name);
		}

		if (strcmp(cfg.font.name, prev_cfg.font.name) != 0 ||
		    strcmp(cfg.line_codepage, prev_cfg.line_codepage) != 0 ||
		    cfg.font.isbold != prev_cfg.font.isbold ||
		    cfg.font.height != prev_cfg.font.height ||
		    cfg.font.charset != prev_cfg.font.charset ||
		    cfg.vtmode != prev_cfg.vtmode ||
		    cfg.bold_colour != prev_cfg.bold_colour ||
		    cfg.resize_action == RESIZE_DISABLED ||
		    cfg.resize_action == RESIZE_EITHER ||
		    (cfg.resize_action != prev_cfg.resize_action))
		    init_lvl = 2;

		InvalidateRect(hwnd, NULL, TRUE);
		reset_window(init_lvl);
		net_pending_errors();
	    }
	    break;
	  case IDM_COPYALL:
	    term_copyall(term);
	    break;
	  case IDM_PASTE:
	    term_do_paste(term);
	    break;
	  case IDM_CLRSB:
	    term_clrsb(term);
	    break;
	  case IDM_RESET:
	    term_pwron(term);
	    if (ldisc)
		ldisc_send(ldisc, NULL, 0, 0);
	    break;
	  case IDM_ABOUT:
	    showabout(hwnd);
	    break;
	  case IDM_HELP:
	    WinHelp(hwnd, help_path,
                    help_has_contents ? HELP_FINDER : HELP_CONTENTS, 0);
	    break;
	  case SC_MOUSEMENU:
	    /*
	     * We get this if the System menu has been activated
	     * using the mouse.
	     */
	    show_mouseptr(1);
	    break;
          case SC_KEYMENU:
	    /*
	     * We get this if the System menu has been activated
	     * using the keyboard. This might happen from within
	     * TranslateKey, in which case it really wants to be
	     * followed by a `space' character to actually _bring
	     * the menu up_ rather than just sitting there in
	     * `ready to appear' state.
	     */
	    show_mouseptr(1);	       /* make sure pointer is visible */
	    if( lParam == 0 )
		PostMessage(hwnd, WM_CHAR, ' ', 0);
	    break;
	  case IDM_FULLSCREEN:
	    flip_full_screen();
	    break;
	  default:
	    if (wParam >= IDM_SAVED_MIN && wParam <= IDM_SAVED_MAX) {
		SendMessage(hwnd, WM_SYSCOMMAND, IDM_SAVEDSESS, wParam);
	    }
	    if (wParam >= IDM_SPECIAL_MIN && wParam <= IDM_SPECIAL_MAX) {
		int i = (wParam - IDM_SPECIAL_MIN) / 0x10;
		/*
		 * Ensure we haven't been sent a bogus SYSCOMMAND
		 * which would cause us to reference invalid memory
		 * and crash. Perhaps I'm just too paranoid here.
		 */
		if (i >= n_specials)
		    break;
		if (back)
		    back->special(backhandle, specials[i].code);
		net_pending_errors();
	    }
	}
	break;

#define X_POS(l) ((int)(short)LOWORD(l))
#define Y_POS(l) ((int)(short)HIWORD(l))

#define TO_CHR_X(x) ((((x)<0 ? (x)-font_width+1 : (x))-offset_width) / font_width)
#define TO_CHR_Y(y) ((((y)<0 ? (y)-font_height+1: (y))-offset_height) / font_height)
      case WM_LBUTTONDOWN:
      case WM_MBUTTONDOWN:
      case WM_RBUTTONDOWN:
      case WM_LBUTTONUP:
      case WM_MBUTTONUP:
      case WM_RBUTTONUP:
	if (message == WM_RBUTTONDOWN &&
	    ((wParam & MK_CONTROL) || (cfg.mouse_is_xterm == 2))) {
	    POINT cursorpos;

	    show_mouseptr(1);	       /* make sure pointer is visible */
	    GetCursorPos(&cursorpos);
	    TrackPopupMenu(popup_menus[CTXMENU].menu,
			   TPM_LEFTALIGN | TPM_TOPALIGN | TPM_RIGHTBUTTON,
			   cursorpos.x, cursorpos.y,
			   0, hwnd, NULL);
	    break;
	}
	{
	    int button, press;

	    switch (message) {
	      case WM_LBUTTONDOWN:
		button = MBT_LEFT;
		press = 1;
		break;
	      case WM_MBUTTONDOWN:
		button = MBT_MIDDLE;
		press = 1;
		break;
	      case WM_RBUTTONDOWN:
		button = MBT_RIGHT;
		press = 1;
		break;
	      case WM_LBUTTONUP:
		button = MBT_LEFT;
		press = 0;
		break;
	      case WM_MBUTTONUP:
		button = MBT_MIDDLE;
		press = 0;
		break;
	      case WM_RBUTTONUP:
		button = MBT_RIGHT;
		press = 0;
		break;
	      default:
		button = press = 0;    /* shouldn't happen */
	    }
	    show_mouseptr(1);
	    /*
	     * Special case: in full-screen mode, if the left
	     * button is clicked in the very top left corner of the
	     * window, we put up the System menu instead of doing
	     * selection.
	     */
	    {
		char mouse_on_hotspot = 0;
		POINT pt;

		GetCursorPos(&pt);
#ifndef NO_MULTIMON
		{
		    HMONITOR mon;
		    MONITORINFO mi;

		    mon = MonitorFromPoint(pt, MONITOR_DEFAULTTONULL);

		    if (mon != NULL) {
			mi.cbSize = sizeof(MONITORINFO);
			GetMonitorInfo(mon, &mi);

			if (mi.rcMonitor.left == pt.x &&
			    mi.rcMonitor.top == pt.y) {
			    mouse_on_hotspot = 1;
			}
		    }
		}
#else
		if (pt.x == 0 && pt.y == 0) {
		    mouse_on_hotspot = 1;
		}
#endif
		if (is_full_screen() && press &&
		    button == MBT_LEFT && mouse_on_hotspot) {
		    SendMessage(hwnd, WM_SYSCOMMAND, SC_MOUSEMENU,
				MAKELPARAM(pt.x, pt.y));
		    return 0;
		}
	    }

	    if (press) {
		click(button,
		      TO_CHR_X(X_POS(lParam)), TO_CHR_Y(Y_POS(lParam)),
		      wParam & MK_SHIFT, wParam & MK_CONTROL,
		      is_alt_pressed());
		SetCapture(hwnd);
	    } else {
		term_mouse(term, button, translate_button(button), MA_RELEASE,
			   TO_CHR_X(X_POS(lParam)),
			   TO_CHR_Y(Y_POS(lParam)), wParam & MK_SHIFT,
			   wParam & MK_CONTROL, is_alt_pressed());
		ReleaseCapture();
	    }
	}
	return 0;
      case WM_MOUSEMOVE:
	{
	    /*
	     * Windows seems to like to occasionally send MOUSEMOVE
	     * events even if the mouse hasn't moved. Don't unhide
	     * the mouse pointer in this case.
	     */
	    static WPARAM wp = 0;
	    static LPARAM lp = 0;
	    if (wParam != wp || lParam != lp ||
		last_mousemove != WM_MOUSEMOVE) {
		show_mouseptr(1);
		wp = wParam; lp = lParam;
		last_mousemove = WM_MOUSEMOVE;
	    }
	}
	/*
	 * Add the mouse position and message time to the random
	 * number noise.
	 */
	noise_ultralight(lParam);

	if (wParam & (MK_LBUTTON | MK_MBUTTON | MK_RBUTTON) &&
	    GetCapture() == hwnd) {
	    Mouse_Button b;
	    if (wParam & MK_LBUTTON)
		b = MBT_LEFT;
	    else if (wParam & MK_MBUTTON)
		b = MBT_MIDDLE;
	    else
		b = MBT_RIGHT;
	    term_mouse(term, b, translate_button(b), MA_DRAG,
		       TO_CHR_X(X_POS(lParam)),
		       TO_CHR_Y(Y_POS(lParam)), wParam & MK_SHIFT,
		       wParam & MK_CONTROL, is_alt_pressed());
	}
	return 0;
      case WM_NCMOUSEMOVE:
	{
	    static WPARAM wp = 0;
	    static LPARAM lp = 0;
	    if (wParam != wp || lParam != lp ||
		last_mousemove != WM_NCMOUSEMOVE) {
		show_mouseptr(1);
		wp = wParam; lp = lParam;
		last_mousemove = WM_NCMOUSEMOVE;
	    }
	}
	noise_ultralight(lParam);
	break;
      case WM_IGNORE_CLIP:
	ignore_clip = wParam;	       /* don't panic on DESTROYCLIPBOARD */
	break;
      case WM_DESTROYCLIPBOARD:
	if (!ignore_clip)
	    term_deselect(term);
	ignore_clip = FALSE;
	return 0;
      case WM_PAINT:
	{
	    PAINTSTRUCT p;
	    HideCaret(hwnd);
	    hdc = BeginPaint(hwnd, &p);
	    if (pal) {
		SelectPalette(hdc, pal, TRUE);
		RealizePalette(hdc);
	    }
	    term_paint(term, hdc, 
		       (p.rcPaint.left-offset_width)/font_width,
		       (p.rcPaint.top-offset_height)/font_height,
		       (p.rcPaint.right-offset_width-1)/font_width,
		       (p.rcPaint.bottom-offset_height-1)/font_height,
		       is_alt_pressed());

	    if (p.fErase ||
	        p.rcPaint.left  < offset_width  ||
		p.rcPaint.top   < offset_height ||
		p.rcPaint.right >= offset_width + font_width*term->cols ||
		p.rcPaint.bottom>= offset_height + font_height*term->rows)
	    {
		HBRUSH fillcolour, oldbrush;
		HPEN   edge, oldpen;
		fillcolour = CreateSolidBrush (
				    colours[(ATTR_DEFBG>>ATTR_BGSHIFT)*2]);
		oldbrush = SelectObject(hdc, fillcolour);
		edge = CreatePen(PS_SOLID, 0, 
				    colours[(ATTR_DEFBG>>ATTR_BGSHIFT)*2]);
		oldpen = SelectObject(hdc, edge);

		/*
		 * Jordan Russell reports that this apparently
		 * ineffectual IntersectClipRect() call masks a
		 * Windows NT/2K bug causing strange display
		 * problems when the PuTTY window is taller than
		 * the primary monitor. It seems harmless enough...
		 */
		IntersectClipRect(hdc,
			p.rcPaint.left, p.rcPaint.top,
			p.rcPaint.right, p.rcPaint.bottom);

		ExcludeClipRect(hdc, 
			offset_width, offset_height,
			offset_width+font_width*term->cols,
			offset_height+font_height*term->rows);

		Rectangle(hdc, p.rcPaint.left, p.rcPaint.top, 
			  p.rcPaint.right, p.rcPaint.bottom);

		// SelectClipRgn(hdc, NULL);

		SelectObject(hdc, oldbrush);
		DeleteObject(fillcolour);
		SelectObject(hdc, oldpen);
		DeleteObject(edge);
	    }
	    SelectObject(hdc, GetStockObject(SYSTEM_FONT));
	    SelectObject(hdc, GetStockObject(WHITE_PEN));
	    EndPaint(hwnd, &p);
	    ShowCaret(hwnd);
	}
	return 0;
      case WM_NETEVENT:
	/* Notice we can get multiple netevents, FD_READ, FD_WRITE etc
	 * but the only one that's likely to try to overload us is FD_READ.
	 * This means buffering just one is fine.
	 */
	if (pending_netevent)
	    enact_pending_netevent();

	pending_netevent = TRUE;
	pend_netevent_wParam = wParam;
	pend_netevent_lParam = lParam;
	if (WSAGETSELECTEVENT(lParam) != FD_READ)
	    enact_pending_netevent();

	time(&last_movement);
	return 0;
      case WM_SETFOCUS:
	term->has_focus = TRUE;
	CreateCaret(hwnd, caretbm, font_width, font_height);
	ShowCaret(hwnd);
	flash_window(0);	       /* stop */
	compose_state = 0;
	term_out(term);
	term_update(term);
	break;
      case WM_KILLFOCUS:
	show_mouseptr(1);
	term->has_focus = FALSE;
	DestroyCaret();
	caret_x = caret_y = -1;	       /* ensure caret is replaced next time */
	term_out(term);
	term_update(term);
	break;
      case WM_ENTERSIZEMOVE:
#ifdef RDB_DEBUG_PATCH
	debug((27, "WM_ENTERSIZEMOVE"));
#endif
	EnableSizeTip(1);
	resizing = TRUE;
	need_backend_resize = FALSE;
	break;
      case WM_EXITSIZEMOVE:
	EnableSizeTip(0);
	resizing = FALSE;
#ifdef RDB_DEBUG_PATCH
	debug((27, "WM_EXITSIZEMOVE"));
#endif
	if (need_backend_resize) {
	    term_size(term, cfg.height, cfg.width, cfg.savelines);
	    InvalidateRect(hwnd, NULL, TRUE);
	}
	break;
      case WM_SIZING:
	/*
	 * This does two jobs:
	 * 1) Keep the sizetip uptodate
	 * 2) Make sure the window size is _stepped_ in units of the font size.
	 */
	if (cfg.resize_action != RESIZE_FONT && !is_alt_pressed()) {
	    int width, height, w, h, ew, eh;
	    LPRECT r = (LPRECT) lParam;

	    if ( !need_backend_resize && cfg.resize_action == RESIZE_EITHER &&
		    (cfg.height != term->rows || cfg.width != term->cols )) {
		/* 
		 * Great! It seems that both the terminal size and the
		 * font size have been changed and the user is now dragging.
		 * 
		 * It will now be difficult to get back to the configured
		 * font size!
		 *
		 * This would be easier but it seems to be too confusing.

		term_size(term, cfg.height, cfg.width, cfg.savelines);
		reset_window(2);
		 */
	        cfg.height=term->rows; cfg.width=term->cols;

		InvalidateRect(hwnd, NULL, TRUE);
		need_backend_resize = TRUE;
	    }

	    width = r->right - r->left - extra_width;
	    height = r->bottom - r->top - extra_height;
	    w = (width + font_width / 2) / font_width;
	    if (w < 1)
		w = 1;
	    h = (height + font_height / 2) / font_height;
	    if (h < 1)
		h = 1;
	    UpdateSizeTip(hwnd, w, h);
	    ew = width - w * font_width;
	    eh = height - h * font_height;
	    if (ew != 0) {
		if (wParam == WMSZ_LEFT ||
		    wParam == WMSZ_BOTTOMLEFT || wParam == WMSZ_TOPLEFT)
		    r->left += ew;
		else
		    r->right -= ew;
	    }
	    if (eh != 0) {
		if (wParam == WMSZ_TOP ||
		    wParam == WMSZ_TOPRIGHT || wParam == WMSZ_TOPLEFT)
		    r->top += eh;
		else
		    r->bottom -= eh;
	    }
	    if (ew || eh)
		return 1;
	    else
		return 0;
	} else {
	    int width, height, w, h, rv = 0;
	    int ex_width = extra_width + (cfg.window_border - offset_width) * 2;
	    int ex_height = extra_height + (cfg.window_border - offset_height) * 2;
	    LPRECT r = (LPRECT) lParam;

	    width = r->right - r->left - ex_width;
	    height = r->bottom - r->top - ex_height;

	    w = (width + term->cols/2)/term->cols;
	    h = (height + term->rows/2)/term->rows;
	    if ( r->right != r->left + w*term->cols + ex_width)
		rv = 1;

	    if (wParam == WMSZ_LEFT ||
		wParam == WMSZ_BOTTOMLEFT || wParam == WMSZ_TOPLEFT)
		r->left = r->right - w*term->cols - ex_width;
	    else
		r->right = r->left + w*term->cols + ex_width;

	    if (r->bottom != r->top + h*term->rows + ex_height)
		rv = 1;

	    if (wParam == WMSZ_TOP ||
		wParam == WMSZ_TOPRIGHT || wParam == WMSZ_TOPLEFT)
		r->top = r->bottom - h*term->rows - ex_height;
	    else
		r->bottom = r->top + h*term->rows + ex_height;

	    return rv;
	}
	/* break;  (never reached) */
      case WM_FULLSCR_ON_MAX:
	fullscr_on_max = TRUE;
	break;
      case WM_MOVE:
	sys_cursor_update();
	break;
      case WM_SIZE:
#ifdef RDB_DEBUG_PATCH
	debug((27, "WM_SIZE %s (%d,%d)",
		(wParam == SIZE_MINIMIZED) ? "SIZE_MINIMIZED":
		(wParam == SIZE_MAXIMIZED) ? "SIZE_MAXIMIZED":
		(wParam == SIZE_RESTORED && resizing) ? "to":
		(wParam == SIZE_RESTORED) ? "SIZE_RESTORED":
		"...",
	    LOWORD(lParam), HIWORD(lParam)));
#endif
	if (wParam == SIZE_MINIMIZED)
	    SetWindowText(hwnd,
			  cfg.win_name_always ? window_name : icon_name);
	if (wParam == SIZE_RESTORED || wParam == SIZE_MAXIMIZED)
	    SetWindowText(hwnd, window_name);
        if (wParam == SIZE_RESTORED)
            clear_full_screen();
        if (wParam == SIZE_MAXIMIZED && fullscr_on_max) {
            fullscr_on_max = FALSE;
            make_full_screen();
        }

	if (cfg.resize_action == RESIZE_DISABLED) {
	    /* A resize, well it better be a minimize. */
	    reset_window(-1);
	} else {

	    int width, height, w, h;

	    width = LOWORD(lParam);
	    height = HIWORD(lParam);

	    if (!resizing) {
		if (wParam == SIZE_MAXIMIZED && !was_zoomed) {
		    was_zoomed = 1;
		    prev_rows = term->rows;
		    prev_cols = term->cols;
		    if (cfg.resize_action == RESIZE_TERM) {
			w = width / font_width;
			if (w < 1) w = 1;
			h = height / font_height;
			if (h < 1) h = 1;

			term_size(term, h, w, cfg.savelines);
		    }
		    reset_window(0);
		} else if (wParam == SIZE_RESTORED && was_zoomed) {
		    was_zoomed = 0;
		    if (cfg.resize_action == RESIZE_TERM)
			term_size(term, prev_rows, prev_cols, cfg.savelines);
		    if (cfg.resize_action != RESIZE_FONT)
			reset_window(2);
		    else
			reset_window(0);
		}
		/* This is an unexpected resize, these will normally happen
		 * if the window is too large. Probably either the user
		 * selected a huge font or the screen size has changed.
		 *
		 * This is also called with minimize.
		 */
		else reset_window(-1);
	    }

	    /*
	     * Don't call back->size in mid-resize. (To prevent
	     * massive numbers of resize events getting sent
	     * down the connection during an NT opaque drag.)
	     */
	    if (resizing) {
		if (cfg.resize_action != RESIZE_FONT && !is_alt_pressed()) {
		    need_backend_resize = TRUE;
		    w = (width-cfg.window_border*2) / font_width;
		    if (w < 1) w = 1;
		    h = (height-cfg.window_border*2) / font_height;
		    if (h < 1) h = 1;

		    cfg.height = h;
		    cfg.width = w;
	        } else 
		    reset_window(0);
	    }
	}
	sys_cursor_update();
	return 0;
      case WM_VSCROLL:
	switch (LOWORD(wParam)) {
	  case SB_BOTTOM:
	    term_scroll(term, -1, 0);
	    break;
	  case SB_TOP:
	    term_scroll(term, +1, 0);
	    break;
	  case SB_LINEDOWN:
	    term_scroll(term, 0, +1);
	    break;
	  case SB_LINEUP:
	    term_scroll(term, 0, -1);
	    break;
	  case SB_PAGEDOWN:
	    term_scroll(term, 0, +term->rows / 2);
	    break;
	  case SB_PAGEUP:
	    term_scroll(term, 0, -term->rows / 2);
	    break;
	  case SB_THUMBPOSITION:
	  case SB_THUMBTRACK:
	    term_scroll(term, 1, HIWORD(wParam));
	    break;
	}
	break;
      case WM_PALETTECHANGED:
	if ((HWND) wParam != hwnd && pal != NULL) {
	    HDC hdc = get_ctx(NULL);
	    if (hdc) {
		if (RealizePalette(hdc) > 0)
		    UpdateColors(hdc);
		free_ctx(hdc);
	    }
	}
	break;
      case WM_QUERYNEWPALETTE:
	if (pal != NULL) {
	    HDC hdc = get_ctx(NULL);
	    if (hdc) {
		if (RealizePalette(hdc) > 0)
		    UpdateColors(hdc);
		free_ctx(hdc);
		return TRUE;
	    }
	}
	return FALSE;
      case WM_KEYDOWN:
      case WM_SYSKEYDOWN:
      case WM_KEYUP:
      case WM_SYSKEYUP:
	/*
	 * Add the scan code and keypress timing to the random
	 * number noise.
	 */
	noise_ultralight(lParam);

	/*
	 * We don't do TranslateMessage since it disassociates the
	 * resulting CHAR message from the KEYDOWN that sparked it,
	 * which we occasionally don't want. Instead, we process
	 * KEYDOWN, and call the Win32 translator functions so that
	 * we get the translations under _our_ control.
	 */
	{
	    unsigned char buf[20];
	    int len;

	    if (wParam == VK_PROCESSKEY) {
		MSG m;
		m.hwnd = hwnd;
		m.message = WM_KEYDOWN;
		m.wParam = wParam;
		m.lParam = lParam & 0xdfff;
		TranslateMessage(&m);
	    } else {
		len = TranslateKey(message, wParam, lParam, buf);
		if (len == -1)
		    return DefWindowProc(hwnd, message, wParam, lParam);

		if (len != 0) {
		    /*
		     * Interrupt an ongoing paste. I'm not sure
		     * this is sensible, but for the moment it's
		     * preferable to having to faff about buffering
		     * things.
		     */
		    term_nopaste(term);

		    /*
		     * We need not bother about stdin backlogs
		     * here, because in GUI PuTTY we can't do
		     * anything about it anyway; there's no means
		     * of asking Windows to hold off on KEYDOWN
		     * messages. We _have_ to buffer everything
		     * we're sent.
		     */
		    term_seen_key_event(term);
		    if (ldisc)
			ldisc_send(ldisc, buf, len, 1);
		    show_mouseptr(0);
		}
	    }
	}
	net_pending_errors();
	return 0;
      case WM_INPUTLANGCHANGE:
	/* wParam == Font number */
	/* lParam == Locale */
	set_input_locale((HKL)lParam);
	sys_cursor_update();
	break;
      case WM_IME_NOTIFY:
	if(wParam == IMN_SETOPENSTATUS) {
	    HIMC hImc = ImmGetContext(hwnd);
	    ImmSetCompositionFont(hImc, &lfont);
	    ImmReleaseContext(hwnd, hImc);
	    return 0;
	}
	break;
      case WM_IME_COMPOSITION:
	{
	    HIMC hIMC;
	    int n;
	    char *buff;

	    if(osVersion.dwPlatformId == VER_PLATFORM_WIN32_WINDOWS || 
	        osVersion.dwPlatformId == VER_PLATFORM_WIN32s) break; /* no Unicode */

	    if ((lParam & GCS_RESULTSTR) == 0) /* Composition unfinished. */
		break; /* fall back to DefWindowProc */

	    hIMC = ImmGetContext(hwnd);
	    n = ImmGetCompositionStringW(hIMC, GCS_RESULTSTR, NULL, 0);

	    if (n > 0) {
		int i;
		buff = snewn(n, char);
		ImmGetCompositionStringW(hIMC, GCS_RESULTSTR, buff, n);
		/*
		 * Jaeyoun Chung reports that Korean character
		 * input doesn't work correctly if we do a single
		 * luni_send() covering the whole of buff. So
		 * instead we luni_send the characters one by one.
		 */
		term_seen_key_event(term);
		for (i = 0; i < n; i += 2) {
		    if (ldisc)
			luni_send(ldisc, (unsigned short *)(buff+i), 1, 1);
		}
		free(buff);
	    }
	    ImmReleaseContext(hwnd, hIMC);
	    return 1;
	}

      case WM_IME_CHAR:
	if (wParam & 0xFF00) {
	    unsigned char buf[2];

	    buf[1] = wParam;
	    buf[0] = wParam >> 8;
	    term_seen_key_event(term);
	    if (ldisc)
		lpage_send(ldisc, kbd_codepage, buf, 2, 1);
	} else {
	    char c = (unsigned char) wParam;
	    term_seen_key_event(term);
	    if (ldisc)
		lpage_send(ldisc, kbd_codepage, &c, 1, 1);
	}
	return (0);
      case WM_CHAR:
      case WM_SYSCHAR:
	/*
	 * Nevertheless, we are prepared to deal with WM_CHAR
	 * messages, should they crop up. So if someone wants to
	 * post the things to us as part of a macro manoeuvre,
	 * we're ready to cope.
	 */
	{
	    char c = (unsigned char)wParam;
	    term_seen_key_event(term);
	    if (ldisc)
		lpage_send(ldisc, CP_ACP, &c, 1, 1);
	}
	return 0;
      case WM_SETCURSOR:
	if (send_raw_mouse && LOWORD(lParam) == HTCLIENT) {
	    SetCursor(LoadCursor(NULL, IDC_ARROW));
	    return TRUE;
	}
	break;
      case WM_SYSCOLORCHANGE:
	if (cfg.system_colour) {
	    /* Refresh palette from system colours. */
	    /* XXX actually this zaps the entire palette. */
	    systopalette();
	    init_palette();
	    /* Force a repaint of the terminal window. */
	    term_invalidate(term);
	}
	break;
      case WM_AGENT_CALLBACK:
	{
	    struct agent_callback *c = (struct agent_callback *)lParam;
	    c->callback(c->callback_ctx, c->data, c->len);
	    sfree(c);
	}
	return 0;
      default:
	if (message == wm_mousewheel || message == WM_MOUSEWHEEL) {
	    int shift_pressed=0, control_pressed=0;

	    if (message == WM_MOUSEWHEEL) {
		wheel_accumulator += (short)HIWORD(wParam);
		shift_pressed=LOWORD(wParam) & MK_SHIFT;
		control_pressed=LOWORD(wParam) & MK_CONTROL;
	    } else {
		BYTE keys[256];
		wheel_accumulator += (int)wParam;
		if (GetKeyboardState(keys)!=0) {
		    shift_pressed=keys[VK_SHIFT]&0x80;
		    control_pressed=keys[VK_CONTROL]&0x80;
		}
	    }

	    /* process events when the threshold is reached */
	    while (abs(wheel_accumulator) >= WHEEL_DELTA) {
		int b;

		/* reduce amount for next time */
		if (wheel_accumulator > 0) {
		    b = MBT_WHEEL_UP;
		    wheel_accumulator -= WHEEL_DELTA;
		} else if (wheel_accumulator < 0) {
		    b = MBT_WHEEL_DOWN;
		    wheel_accumulator += WHEEL_DELTA;
		} else
		    break;

		if (send_raw_mouse &&
		    !(cfg.mouse_override && shift_pressed)) {
		    /* send a mouse-down followed by a mouse up */
		    term_mouse(term, b, translate_button(b),
			       MA_CLICK,
			       TO_CHR_X(X_POS(lParam)),
			       TO_CHR_Y(Y_POS(lParam)), shift_pressed,
			       control_pressed, is_alt_pressed());
		    term_mouse(term, b, translate_button(b),
			       MA_RELEASE, TO_CHR_X(X_POS(lParam)),
			       TO_CHR_Y(Y_POS(lParam)), shift_pressed,
			       control_pressed, is_alt_pressed());
		} else {
		    /* trigger a scroll */
		    term_scroll(term, 0,
				b == MBT_WHEEL_UP ?
				-term->rows / 2 : term->rows / 2);
		}
	    }
	    return 0;
	}
    }

    return DefWindowProc(hwnd, message, wParam, lParam);
}

/*
 * Move the system caret. (We maintain one, even though it's
 * invisible, for the benefit of blind people: apparently some
 * helper software tracks the system caret, so we should arrange to
 * have one.)
 */
void sys_cursor(void *frontend, int x, int y)
{
    int cx, cy;

    if (!term->has_focus) return;

    /*
     * Avoid gratuitously re-updating the cursor position and IMM
     * window if there's no actual change required.
     */
    cx = x * font_width + offset_width;
    cy = y * font_height + offset_height;
    if (cx == caret_x && cy == caret_y)
	return;
    caret_x = cx;
    caret_y = cy;

    sys_cursor_update();
}

static void sys_cursor_update(void)
{
    COMPOSITIONFORM cf;
    HIMC hIMC;

    if (!term->has_focus) return;

    if (caret_x < 0 || caret_y < 0)
	return;

    SetCaretPos(caret_x, caret_y);

    /* IMM calls on Win98 and beyond only */
    if(osVersion.dwPlatformId == VER_PLATFORM_WIN32s) return; /* 3.11 */
    
    if(osVersion.dwPlatformId == VER_PLATFORM_WIN32_WINDOWS &&
	    osVersion.dwMinorVersion == 0) return; /* 95 */

    /* we should have the IMM functions */
    hIMC = ImmGetContext(hwnd);
    cf.dwStyle = CFS_POINT;
    cf.ptCurrentPos.x = caret_x;
    cf.ptCurrentPos.y = caret_y;
    ImmSetCompositionWindow(hIMC, &cf);

    ImmReleaseContext(hwnd, hIMC);
}

/*
 * Draw a line of text in the window, at given character
 * coordinates, in given attributes.
 *
 * We are allowed to fiddle with the contents of `text'.
 */
void do_text(Context ctx, int x, int y, char *text, int len,
	     unsigned long attr, int lattr)
{
    COLORREF fg, bg, t;
    int nfg, nbg, nfont;
    HDC hdc = ctx;
    RECT line_box;
    int force_manual_underline = 0;
    int fnt_width = font_width * (1 + (lattr != LATTR_NORM));
    int char_width = fnt_width;
    int text_adjust = 0;
    static int *IpDx = 0, IpDxLEN = 0;

    if (attr & ATTR_WIDE)
	char_width *= 2;

    if (len > IpDxLEN || IpDx[0] != char_width) {
	int i;
	if (len > IpDxLEN) {
	    sfree(IpDx);
	    IpDx = snewn(len + 16, int);
	    IpDxLEN = (len + 16);
	}
	for (i = 0; i < IpDxLEN; i++)
	    IpDx[i] = char_width;
    }

    /* Only want the left half of double width lines */
    if (lattr != LATTR_NORM && x*2 >= term->cols)
	return;

    x *= fnt_width;
    y *= font_height;
    x += offset_width;
    y += offset_height;

    if ((attr & TATTR_ACTCURS) && (cfg.cursor_type == 0 || term->big_cursor)) {
	attr &= ATTR_CUR_AND | (bold_mode != BOLD_COLOURS ? ATTR_BOLD : 0);
	attr ^= ATTR_CUR_XOR;
    }

    nfont = 0;
    if (cfg.vtmode == VT_POORMAN && lattr != LATTR_NORM) {
	/* Assume a poorman font is borken in other ways too. */
	lattr = LATTR_WIDE;
    } else
	switch (lattr) {
	  case LATTR_NORM:
	    break;
	  case LATTR_WIDE:
	    nfont |= FONT_WIDE;
	    break;
	  default:
	    nfont |= FONT_WIDE + FONT_HIGH;
	    break;
	}
    if (attr & ATTR_NARROW)
	nfont |= FONT_NARROW;

    /* Special hack for the VT100 linedraw glyphs. */
    if ((attr & CSET_MASK) == 0x2300) {
	if (text[0] >= (char) 0xBA && text[0] <= (char) 0xBD) {
	    switch ((unsigned char) (text[0])) {
	      case 0xBA:
		text_adjust = -2 * font_height / 5;
		break;
	      case 0xBB:
		text_adjust = -1 * font_height / 5;
		break;
	      case 0xBC:
		text_adjust = font_height / 5;
		break;
	      case 0xBD:
		text_adjust = 2 * font_height / 5;
		break;
	    }
	    if (lattr == LATTR_TOP || lattr == LATTR_BOT)
		text_adjust *= 2;
	    attr &= ~CSET_MASK;
	    text[0] = (char) (ucsdata.unitab_xterm['q'] & CHAR_MASK);
	    attr |= (ucsdata.unitab_xterm['q'] & CSET_MASK);
	    if (attr & ATTR_UNDER) {
		attr &= ~ATTR_UNDER;
		force_manual_underline = 1;
	    }
	}
    }

    /* Anything left as an original character set is unprintable. */
    if (DIRECT_CHAR(attr)) {
	attr &= ~CSET_MASK;
	attr |= 0xFF00;
	memset(text, 0xFD, len);
    }

    /* OEM CP */
    if ((attr & CSET_MASK) == ATTR_OEMCP)
	nfont |= FONT_OEM;

    nfg = ((attr & ATTR_FGMASK) >> ATTR_FGSHIFT);
    nfg = 2 * (nfg & 0xF) + (nfg & 0x10 ? 1 : 0);
    nbg = ((attr & ATTR_BGMASK) >> ATTR_BGSHIFT);
    nbg = 2 * (nbg & 0xF) + (nbg & 0x10 ? 1 : 0);
    if (bold_mode == BOLD_FONT && (attr & ATTR_BOLD))
	nfont |= FONT_BOLD;
    if (und_mode == UND_FONT && (attr & ATTR_UNDER))
	nfont |= FONT_UNDERLINE;
    another_font(nfont);
    if (!fonts[nfont]) {
	if (nfont & FONT_UNDERLINE)
	    force_manual_underline = 1;
	/* Don't do the same for manual bold, it could be bad news. */

	nfont &= ~(FONT_BOLD | FONT_UNDERLINE);
    }
    another_font(nfont);
    if (!fonts[nfont])
	nfont = FONT_NORMAL;
    if (attr & ATTR_REVERSE) {
	t = nfg;
	nfg = nbg;
	nbg = t;
    }
    if (bold_mode == BOLD_COLOURS && (attr & ATTR_BOLD))
	nfg |= 1;
    if (bold_mode == BOLD_COLOURS && (attr & ATTR_BLINK))
	nbg |= 1;
    fg = colours[nfg];
    bg = colours[nbg];
    SelectObject(hdc, fonts[nfont]);
    SetTextColor(hdc, fg);
    SetBkColor(hdc, bg);
    SetBkMode(hdc, OPAQUE);
    line_box.left = x;
    line_box.top = y;
    line_box.right = x + char_width * len;
    line_box.bottom = y + font_height;

    /* Only want the left half of double width lines */
    if (line_box.right > font_width*term->cols+offset_width)
	line_box.right = font_width*term->cols+offset_width;

    /* We're using a private area for direct to font. (512 chars.) */
    if (ucsdata.dbcs_screenfont && (attr & CSET_MASK) == ATTR_ACP) {
	/* Ho Hum, dbcs fonts are a PITA! */
	/* To display on W9x I have to convert to UCS */
	static wchar_t *uni_buf = 0;
	static int uni_len = 0;
	int nlen, mptr;
	if (len > uni_len) {
	    sfree(uni_buf);
	    uni_len = len;
	    uni_buf = snewn(uni_len, wchar_t);
	}

	for(nlen = mptr = 0; mptr<len; mptr++) {
	    uni_buf[nlen] = 0xFFFD;
	    if (IsDBCSLeadByteEx(ucsdata.font_codepage, (BYTE) text[mptr])) {
		IpDx[nlen] += char_width;
	        MultiByteToWideChar(ucsdata.font_codepage, MB_USEGLYPHCHARS,
				   text+mptr, 2, uni_buf+nlen, 1);
		mptr++;
	    }
	    else
	    {
	        MultiByteToWideChar(ucsdata.font_codepage, MB_USEGLYPHCHARS,
				   text+mptr, 1, uni_buf+nlen, 1);
	    }
	    nlen++;
	}
	if (nlen <= 0)
	    return;		       /* Eeek! */

	ExtTextOutW(hdc, x,
		    y - font_height * (lattr == LATTR_BOT) + text_adjust,
		    ETO_CLIPPED | ETO_OPAQUE, &line_box, uni_buf, nlen, IpDx);
	if (bold_mode == BOLD_SHADOW && (attr & ATTR_BOLD)) {
	    SetBkMode(hdc, TRANSPARENT);
	    ExtTextOutW(hdc, x - 1,
			y - font_height * (lattr ==
					   LATTR_BOT) + text_adjust,
			ETO_CLIPPED, &line_box, uni_buf, nlen, IpDx);
	}

	IpDx[0] = -1;
    } else if (DIRECT_FONT(attr)) {
	ExtTextOut(hdc, x,
		   y - font_height * (lattr == LATTR_BOT) + text_adjust,
		   ETO_CLIPPED | ETO_OPAQUE, &line_box, text, len, IpDx);
	if (bold_mode == BOLD_SHADOW && (attr & ATTR_BOLD)) {
	    SetBkMode(hdc, TRANSPARENT);

	    /* GRR: This draws the character outside it's box and can leave
	     * 'droppings' even with the clip box! I suppose I could loop it
	     * one character at a time ... yuk. 
	     * 
	     * Or ... I could do a test print with "W", and use +1 or -1 for this
	     * shift depending on if the leftmost column is blank...
	     */
	    ExtTextOut(hdc, x - 1,
		       y - font_height * (lattr ==
					  LATTR_BOT) + text_adjust,
		       ETO_CLIPPED, &line_box, text, len, IpDx);
	}
    } else {
	/* And 'normal' unicode characters */
	static WCHAR *wbuf = NULL;
	static int wlen = 0;
	int i;
	if (wlen < len) {
	    sfree(wbuf);
	    wlen = len;
	    wbuf = snewn(wlen, WCHAR);
	}
	for (i = 0; i < len; i++)
	    wbuf[i] = (WCHAR) ((attr & CSET_MASK) + (text[i] & CHAR_MASK));

	ExtTextOutW(hdc, x,
		    y - font_height * (lattr == LATTR_BOT) + text_adjust,
		    ETO_CLIPPED | ETO_OPAQUE, &line_box, wbuf, len, IpDx);

	/* And the shadow bold hack. */
	if (bold_mode == BOLD_SHADOW && (attr & ATTR_BOLD)) {
	    SetBkMode(hdc, TRANSPARENT);
	    ExtTextOutW(hdc, x - 1,
			y - font_height * (lattr ==
					   LATTR_BOT) + text_adjust,
			ETO_CLIPPED, &line_box, wbuf, len, IpDx);
	}
    }
    if (lattr != LATTR_TOP && (force_manual_underline ||
			       (und_mode == UND_LINE
				&& (attr & ATTR_UNDER)))) {
	HPEN oldpen;
	int dec = descent;
	if (lattr == LATTR_BOT)
	    dec = dec * 2 - font_height;

	oldpen = SelectObject(hdc, CreatePen(PS_SOLID, 0, fg));
	MoveToEx(hdc, x, y + dec, NULL);
	LineTo(hdc, x + len * char_width, y + dec);
	oldpen = SelectObject(hdc, oldpen);
	DeleteObject(oldpen);
    }
}

void do_cursor(Context ctx, int x, int y, char *text, int len,
	       unsigned long attr, int lattr)
{

    int fnt_width;
    int char_width;
    HDC hdc = ctx;
    int ctype = cfg.cursor_type;

    if ((attr & TATTR_ACTCURS) && (ctype == 0 || term->big_cursor)) {
	if (((attr & CSET_MASK) | (unsigned char) *text) != UCSWIDE) {
	    do_text(ctx, x, y, text, len, attr, lattr);
	    return;
	}
	ctype = 2;
	attr |= TATTR_RIGHTCURS;
    }

    fnt_width = char_width = font_width * (1 + (lattr != LATTR_NORM));
    if (attr & ATTR_WIDE)
	char_width *= 2;
    x *= fnt_width;
    y *= font_height;
    x += offset_width;
    y += offset_height;

    if ((attr & TATTR_PASCURS) && (ctype == 0 || term->big_cursor)) {
	POINT pts[5];
	HPEN oldpen;
	pts[0].x = pts[1].x = pts[4].x = x;
	pts[2].x = pts[3].x = x + char_width - 1;
	pts[0].y = pts[3].y = pts[4].y = y;
	pts[1].y = pts[2].y = y + font_height - 1;
	oldpen = SelectObject(hdc, CreatePen(PS_SOLID, 0, colours[23]));
	Polyline(hdc, pts, 5);
	oldpen = SelectObject(hdc, oldpen);
	DeleteObject(oldpen);
    } else if ((attr & (TATTR_ACTCURS | TATTR_PASCURS)) && ctype != 0) {
	int startx, starty, dx, dy, length, i;
	if (ctype == 1) {
	    startx = x;
	    starty = y + descent;
	    dx = 1;
	    dy = 0;
	    length = char_width;
	} else {
	    int xadjust = 0;
	    if (attr & TATTR_RIGHTCURS)
		xadjust = char_width - 1;
	    startx = x + xadjust;
	    starty = y;
	    dx = 0;
	    dy = 1;
	    length = font_height;
	}
	if (attr & TATTR_ACTCURS) {
	    HPEN oldpen;
	    oldpen =
		SelectObject(hdc, CreatePen(PS_SOLID, 0, colours[23]));
	    MoveToEx(hdc, startx, starty, NULL);
	    LineTo(hdc, startx + dx * length, starty + dy * length);
	    oldpen = SelectObject(hdc, oldpen);
	    DeleteObject(oldpen);
	} else {
	    for (i = 0; i < length; i++) {
		if (i % 2 == 0) {
		    SetPixel(hdc, startx, starty, colours[23]);
		}
		startx += dx;
		starty += dy;
	    }
	}
    }
}

/* This function gets the actual width of a character in the normal font.
 */
int char_width(Context ctx, int uc) {
    HDC hdc = ctx;
    int ibuf = 0;

    /* If the font max is the same as the font ave width then this
     * function is a no-op.
     */
    if (!font_dualwidth) return 1;

    switch (uc & CSET_MASK) {
      case ATTR_ASCII:
	uc = ucsdata.unitab_line[uc & 0xFF];
	break;
      case ATTR_LINEDRW:
	uc = ucsdata.unitab_xterm[uc & 0xFF];
	break;
      case ATTR_SCOACS:
	uc = ucsdata.unitab_scoacs[uc & 0xFF];
	break;
    }
    if (DIRECT_FONT(uc)) {
	if (ucsdata.dbcs_screenfont) return 1;

	/* Speedup, I know of no font where ascii is the wrong width */
	if ((uc&CHAR_MASK) >= ' ' && (uc&CHAR_MASK)<= '~') 
	    return 1;

	if ( (uc & CSET_MASK) == ATTR_ACP ) {
	    SelectObject(hdc, fonts[FONT_NORMAL]);
	} else if ( (uc & CSET_MASK) == ATTR_OEMCP ) {
	    another_font(FONT_OEM);
	    if (!fonts[FONT_OEM]) return 0;

	    SelectObject(hdc, fonts[FONT_OEM]);
	} else
	    return 0;

	if ( GetCharWidth32(hdc, uc&CHAR_MASK, uc&CHAR_MASK, &ibuf) != 1 && 
	     GetCharWidth(hdc, uc&CHAR_MASK, uc&CHAR_MASK, &ibuf) != 1)
	    return 0;
    } else {
	/* Speedup, I know of no font where ascii is the wrong width */
	if (uc >= ' ' && uc <= '~') return 1;

	SelectObject(hdc, fonts[FONT_NORMAL]);
	if ( GetCharWidth32W(hdc, uc, uc, &ibuf) == 1 )
	    /* Okay that one worked */ ;
	else if ( GetCharWidthW(hdc, uc, uc, &ibuf) == 1 )
	    /* This should work on 9x too, but it's "less accurate" */ ;
	else
	    return 0;
    }

    ibuf += font_width / 2 -1;
    ibuf /= font_width;

    return ibuf;
}

/*
 * Translate a WM_(SYS)?KEY(UP|DOWN) message into a string of ASCII
 * codes. Returns number of bytes used or zero to drop the message
 * or -1 to forward the message to windows.
 */
static int TranslateKey(UINT message, WPARAM wParam, LPARAM lParam,
			unsigned char *output)
{
    BYTE keystate[256];
    int scan, left_alt = 0, key_down, shift_state;
    int r, i, code;
    unsigned char *p = output;
    static int alt_sum = 0;

    HKL kbd_layout = GetKeyboardLayout(0);

    /* keys is for ToAsciiEx. There's some ick here, see below. */
    static WORD keys[3];
    static int compose_char = 0;
    static WPARAM compose_key = 0;

    r = GetKeyboardState(keystate);
    if (!r)
	memset(keystate, 0, sizeof(keystate));
    else {
#if 0
#define SHOW_TOASCII_RESULT
	{			       /* Tell us all about key events */
	    static BYTE oldstate[256];
	    static int first = 1;
	    static int scan;
	    int ch;
	    if (first)
		memcpy(oldstate, keystate, sizeof(oldstate));
	    first = 0;

	    if ((HIWORD(lParam) & (KF_UP | KF_REPEAT)) == KF_REPEAT) {
		debug(("+"));
	    } else if ((HIWORD(lParam) & KF_UP)
		       && scan == (HIWORD(lParam) & 0xFF)) {
		debug((". U"));
	    } else {
		debug((".\n"));
		if (wParam >= VK_F1 && wParam <= VK_F20)
		    debug(("K_F%d", wParam + 1 - VK_F1));
		else
		    switch (wParam) {
		      case VK_SHIFT:
			debug(("SHIFT"));
			break;
		      case VK_CONTROL:
			debug(("CTRL"));
			break;
		      case VK_MENU:
			debug(("ALT"));
			break;
		      default:
			debug(("VK_%02x", wParam));
		    }
		if (message == WM_SYSKEYDOWN || message == WM_SYSKEYUP)
		    debug(("*"));
		debug((", S%02x", scan = (HIWORD(lParam) & 0xFF)));

		ch = MapVirtualKeyEx(wParam, 2, kbd_layout);
		if (ch >= ' ' && ch <= '~')
		    debug((", '%c'", ch));
		else if (ch)
		    debug((", $%02x", ch));

		if (keys[0])
		    debug((", KB0=%02x", keys[0]));
		if (keys[1])
		    debug((", KB1=%02x", keys[1]));
		if (keys[2])
		    debug((", KB2=%02x", keys[2]));

		if ((keystate[VK_SHIFT] & 0x80) != 0)
		    debug((", S"));
		if ((keystate[VK_CONTROL] & 0x80) != 0)
		    debug((", C"));
		if ((HIWORD(lParam) & KF_EXTENDED))
		    debug((", E"));
		if ((HIWORD(lParam) & KF_UP))
		    debug((", U"));
	    }

	    if ((HIWORD(lParam) & (KF_UP | KF_REPEAT)) == KF_REPEAT);
	    else if ((HIWORD(lParam) & KF_UP))
		oldstate[wParam & 0xFF] ^= 0x80;
	    else
		oldstate[wParam & 0xFF] ^= 0x81;

	    for (ch = 0; ch < 256; ch++)
		if (oldstate[ch] != keystate[ch])
		    debug((", M%02x=%02x", ch, keystate[ch]));

	    memcpy(oldstate, keystate, sizeof(oldstate));
	}
#endif

	if (wParam == VK_MENU && (HIWORD(lParam) & KF_EXTENDED)) {
	    keystate[VK_RMENU] = keystate[VK_MENU];
	}


	/* Nastyness with NUMLock - Shift-NUMLock is left alone though */
	if ((cfg.funky_type == FUNKY_VT400 ||
	     (cfg.funky_type <= FUNKY_LINUX && term->app_keypad_keys &&
	      !cfg.no_applic_k))
	    && wParam == VK_NUMLOCK && !(keystate[VK_SHIFT] & 0x80)) {

	    wParam = VK_EXECUTE;

	    /* UnToggle NUMLock */
	    if ((HIWORD(lParam) & (KF_UP | KF_REPEAT)) == 0)
		keystate[VK_NUMLOCK] ^= 1;
	}

	/* And write back the 'adjusted' state */
	SetKeyboardState(keystate);
    }

    /* Disable Auto repeat if required */
    if (term->repeat_off &&
	(HIWORD(lParam) & (KF_UP | KF_REPEAT)) == KF_REPEAT)
	return 0;

    if ((HIWORD(lParam) & KF_ALTDOWN) && (keystate[VK_RMENU] & 0x80) == 0)
	left_alt = 1;

    key_down = ((HIWORD(lParam) & KF_UP) == 0);

    /* Make sure Ctrl-ALT is not the same as AltGr for ToAscii unless told. */
    if (left_alt && (keystate[VK_CONTROL] & 0x80)) {
	if (cfg.ctrlaltkeys)
	    keystate[VK_MENU] = 0;
	else {
	    keystate[VK_RMENU] = 0x80;
	    left_alt = 0;
	}
    }

    scan = (HIWORD(lParam) & (KF_UP | KF_EXTENDED | 0xFF));
    shift_state = ((keystate[VK_SHIFT] & 0x80) != 0)
	+ ((keystate[VK_CONTROL] & 0x80) != 0) * 2;

    /* Note if AltGr was pressed and if it was used as a compose key */
    if (!compose_state) {
	compose_key = 0x100;
	if (cfg.compose_key) {
	    if (wParam == VK_MENU && (HIWORD(lParam) & KF_EXTENDED))
		compose_key = wParam;
	}
	if (wParam == VK_APPS)
	    compose_key = wParam;
    }

    if (wParam == compose_key) {
	if (compose_state == 0
	    && (HIWORD(lParam) & (KF_UP | KF_REPEAT)) == 0) compose_state =
		1;
	else if (compose_state == 1 && (HIWORD(lParam) & KF_UP))
	    compose_state = 2;
	else
	    compose_state = 0;
    } else if (compose_state == 1 && wParam != VK_CONTROL)
	compose_state = 0;

    if (compose_state > 1 && left_alt)
	compose_state = 0;

    /* Sanitize the number pad if not using a PC NumPad */
    if (left_alt || (term->app_keypad_keys && !cfg.no_applic_k
		     && cfg.funky_type != FUNKY_XTERM)
	|| cfg.funky_type == FUNKY_VT400 || cfg.nethack_keypad || compose_state) {
	if ((HIWORD(lParam) & KF_EXTENDED) == 0) {
	    int nParam = 0;
	    switch (wParam) {
	      case VK_INSERT:
		nParam = VK_NUMPAD0;
		break;
	      case VK_END:
		nParam = VK_NUMPAD1;
		break;
	      case VK_DOWN:
		nParam = VK_NUMPAD2;
		break;
	      case VK_NEXT:
		nParam = VK_NUMPAD3;
		break;
	      case VK_LEFT:
		nParam = VK_NUMPAD4;
		break;
	      case VK_CLEAR:
		nParam = VK_NUMPAD5;
		break;
	      case VK_RIGHT:
		nParam = VK_NUMPAD6;
		break;
	      case VK_HOME:
		nParam = VK_NUMPAD7;
		break;
	      case VK_UP:
		nParam = VK_NUMPAD8;
		break;
	      case VK_PRIOR:
		nParam = VK_NUMPAD9;
		break;
	      case VK_DELETE:
		nParam = VK_DECIMAL;
		break;
	    }
	    if (nParam) {
		if (keystate[VK_NUMLOCK] & 1)
		    shift_state |= 1;
		wParam = nParam;
	    }
	}
    }

    /* If a key is pressed and AltGr is not active */
    if (key_down && (keystate[VK_RMENU] & 0x80) == 0 && !compose_state) {
	/* Okay, prepare for most alts then ... */
	if (left_alt)
	    *p++ = '\033';

	/* Lets see if it's a pattern we know all about ... */
	if (wParam == VK_PRIOR && shift_state == 1) {
	    SendMessage(hwnd, WM_VSCROLL, SB_PAGEUP, 0);
	    return 0;
	}
	if (wParam == VK_PRIOR && shift_state == 2) {
	    SendMessage(hwnd, WM_VSCROLL, SB_LINEUP, 0);
	    return 0;
	}
	if (wParam == VK_NEXT && shift_state == 1) {
	    SendMessage(hwnd, WM_VSCROLL, SB_PAGEDOWN, 0);
	    return 0;
	}
	if (wParam == VK_NEXT && shift_state == 2) {
	    SendMessage(hwnd, WM_VSCROLL, SB_LINEDOWN, 0);
	    return 0;
	}
	if (wParam == VK_INSERT && shift_state == 1) {
	    term_do_paste(term);
	    return 0;
	}
	if (left_alt && wParam == VK_F4 && cfg.alt_f4) {
	    return -1;
	}
	if (left_alt && wParam == VK_SPACE && cfg.alt_space) {
	    SendMessage(hwnd, WM_SYSCOMMAND, SC_KEYMENU, 0);
	    return -1;
	}
	if (left_alt && wParam == VK_RETURN && cfg.fullscreenonaltenter &&
	    (cfg.resize_action != RESIZE_DISABLED)) {
 	    if ((HIWORD(lParam) & (KF_UP | KF_REPEAT)) != KF_REPEAT)
 		flip_full_screen();
	    return -1;
	}
	/* Control-Numlock for app-keypad mode switch */
	if (wParam == VK_PAUSE && shift_state == 2) {
	    term->app_keypad_keys ^= 1;
	    return 0;
	}

	/* Nethack keypad */
	if (cfg.nethack_keypad && !left_alt) {
	    switch (wParam) {
	      case VK_NUMPAD1:
		*p++ = shift_state ? 'B' : 'b';
		return p - output;
	      case VK_NUMPAD2:
		*p++ = shift_state ? 'J' : 'j';
		return p - output;
	      case VK_NUMPAD3:
		*p++ = shift_state ? 'N' : 'n';
		return p - output;
	      case VK_NUMPAD4:
		*p++ = shift_state ? 'H' : 'h';
		return p - output;
	      case VK_NUMPAD5:
		*p++ = shift_state ? '.' : '.';
		return p - output;
	      case VK_NUMPAD6:
		*p++ = shift_state ? 'L' : 'l';
		return p - output;
	      case VK_NUMPAD7:
		*p++ = shift_state ? 'Y' : 'y';
		return p - output;
	      case VK_NUMPAD8:
		*p++ = shift_state ? 'K' : 'k';
		return p - output;
	      case VK_NUMPAD9:
		*p++ = shift_state ? 'U' : 'u';
		return p - output;
	    }
	}

	/* Application Keypad */
	if (!left_alt) {
	    int xkey = 0;

	    if (cfg.funky_type == FUNKY_VT400 ||
		(cfg.funky_type <= FUNKY_LINUX &&
		 term->app_keypad_keys && !cfg.no_applic_k)) switch (wParam) {
		  case VK_EXECUTE:
		    xkey = 'P';
		    break;
		  case VK_DIVIDE:
		    xkey = 'Q';
		    break;
		  case VK_MULTIPLY:
		    xkey = 'R';
		    break;
		  case VK_SUBTRACT:
		    xkey = 'S';
		    break;
		}
	    if (term->app_keypad_keys && !cfg.no_applic_k)
		switch (wParam) {
		  case VK_NUMPAD0:
		    xkey = 'p';
		    break;
		  case VK_NUMPAD1:
		    xkey = 'q';
		    break;
		  case VK_NUMPAD2:
		    xkey = 'r';
		    break;
		  case VK_NUMPAD3:
		    xkey = 's';
		    break;
		  case VK_NUMPAD4:
		    xkey = 't';
		    break;
		  case VK_NUMPAD5:
		    xkey = 'u';
		    break;
		  case VK_NUMPAD6:
		    xkey = 'v';
		    break;
		  case VK_NUMPAD7:
		    xkey = 'w';
		    break;
		  case VK_NUMPAD8:
		    xkey = 'x';
		    break;
		  case VK_NUMPAD9:
		    xkey = 'y';
		    break;

		  case VK_DECIMAL:
		    xkey = 'n';
		    break;
		  case VK_ADD:
		    if (cfg.funky_type == FUNKY_XTERM) {
			if (shift_state)
			    xkey = 'l';
			else
			    xkey = 'k';
		    } else if (shift_state)
			xkey = 'm';
		    else
			xkey = 'l';
		    break;

		  case VK_DIVIDE:
		    if (cfg.funky_type == FUNKY_XTERM)
			xkey = 'o';
		    break;
		  case VK_MULTIPLY:
		    if (cfg.funky_type == FUNKY_XTERM)
			xkey = 'j';
		    break;
		  case VK_SUBTRACT:
		    if (cfg.funky_type == FUNKY_XTERM)
			xkey = 'm';
		    break;

		  case VK_RETURN:
		    if (HIWORD(lParam) & KF_EXTENDED)
			xkey = 'M';
		    break;
		}
	    if (xkey) {
		if (term->vt52_mode) {
		    if (xkey >= 'P' && xkey <= 'S')
			p += sprintf((char *) p, "\x1B%c", xkey);
		    else
			p += sprintf((char *) p, "\x1B?%c", xkey);
		} else
		    p += sprintf((char *) p, "\x1BO%c", xkey);
		return p - output;
	    }
	}

	if (wParam == VK_BACK && shift_state == 0) {	/* Backspace */
	    *p++ = (cfg.bksp_is_delete ? 0x7F : 0x08);
	    *p++ = 0;
	    return -2;
	}
	if (wParam == VK_BACK && shift_state == 1) {	/* Shift Backspace */
	    /* We do the opposite of what is configured */
	    *p++ = (cfg.bksp_is_delete ? 0x08 : 0x7F);
	    *p++ = 0;
	    return -2;
	}
	if (wParam == VK_TAB && shift_state == 1) {	/* Shift tab */
	    *p++ = 0x1B;
	    *p++ = '[';
	    *p++ = 'Z';
	    return p - output;
	}
	if (wParam == VK_SPACE && shift_state == 2) {	/* Ctrl-Space */
	    *p++ = 0;
	    return p - output;
	}
	if (wParam == VK_SPACE && shift_state == 3) {	/* Ctrl-Shift-Space */
	    *p++ = 160;
	    return p - output;
	}
	if (wParam == VK_CANCEL && shift_state == 2) {	/* Ctrl-Break */
	    *p++ = 3;
	    *p++ = 0;
	    return -2;
	}
	if (wParam == VK_PAUSE) {      /* Break/Pause */
	    *p++ = 26;
	    *p++ = 0;
	    return -2;
	}
	/* Control-2 to Control-8 are special */
	if (shift_state == 2 && wParam >= '2' && wParam <= '8') {
	    *p++ = "\000\033\034\035\036\037\177"[wParam - '2'];
	    return p - output;
	}
	if (shift_state == 2 && (wParam == 0xBD || wParam == 0xBF)) {
	    *p++ = 0x1F;
	    return p - output;
	}
	if (shift_state == 2 && wParam == 0xDF) {
	    *p++ = 0x1C;
	    return p - output;
	}
	if (shift_state == 3 && wParam == 0xDE) {
	    *p++ = 0x1E;	       /* Ctrl-~ == Ctrl-^ in xterm at least */
	    return p - output;
	}
	if (shift_state == 0 && wParam == VK_RETURN && term->cr_lf_return) {
	    *p++ = '\r';
	    *p++ = '\n';
	    return p - output;
	}

	/*
	 * Next, all the keys that do tilde codes. (ESC '[' nn '~',
	 * for integer decimal nn.)
	 *
	 * We also deal with the weird ones here. Linux VCs replace F1
	 * to F5 by ESC [ [ A to ESC [ [ E. rxvt doesn't do _that_, but
	 * does replace Home and End (1~ and 4~) by ESC [ H and ESC O w
	 * respectively.
	 */
	code = 0;
	switch (wParam) {
	  case VK_F1:
	    code = (keystate[VK_SHIFT] & 0x80 ? 23 : 11);
	    break;
	  case VK_F2:
	    code = (keystate[VK_SHIFT] & 0x80 ? 24 : 12);
	    break;
	  case VK_F3:
	    code = (keystate[VK_SHIFT] & 0x80 ? 25 : 13);
	    break;
	  case VK_F4:
	    code = (keystate[VK_SHIFT] & 0x80 ? 26 : 14);
	    break;
	  case VK_F5:
	    code = (keystate[VK_SHIFT] & 0x80 ? 28 : 15);
	    break;
	  case VK_F6:
	    code = (keystate[VK_SHIFT] & 0x80 ? 29 : 17);
	    break;
	  case VK_F7:
	    code = (keystate[VK_SHIFT] & 0x80 ? 31 : 18);
	    break;
	  case VK_F8:
	    code = (keystate[VK_SHIFT] & 0x80 ? 32 : 19);
	    break;
	  case VK_F9:
	    code = (keystate[VK_SHIFT] & 0x80 ? 33 : 20);
	    break;
	  case VK_F10:
	    code = (keystate[VK_SHIFT] & 0x80 ? 34 : 21);
	    break;
	  case VK_F11:
	    code = 23;
	    break;
	  case VK_F12:
	    code = 24;
	    break;
	  case VK_F13:
	    code = 25;
	    break;
	  case VK_F14:
	    code = 26;
	    break;
	  case VK_F15:
	    code = 28;
	    break;
	  case VK_F16:
	    code = 29;
	    break;
	  case VK_F17:
	    code = 31;
	    break;
	  case VK_F18:
	    code = 32;
	    break;
	  case VK_F19:
	    code = 33;
	    break;
	  case VK_F20:
	    code = 34;
	    break;
	}
	if ((shift_state&2) == 0) switch (wParam) {
	  case VK_HOME:
	    code = 1;
	    break;
	  case VK_INSERT:
	    code = 2;
	    break;
	  case VK_DELETE:
	    code = 3;
	    break;
	  case VK_END:
	    code = 4;
	    break;
	  case VK_PRIOR:
	    code = 5;
	    break;
	  case VK_NEXT:
	    code = 6;
	    break;
	}
	/* Reorder edit keys to physical order */
	if (cfg.funky_type == FUNKY_VT400 && code <= 6)
	    code = "\0\2\1\4\5\3\6"[code];

	if (term->vt52_mode && code > 0 && code <= 6) {
	    p += sprintf((char *) p, "\x1B%c", " HLMEIG"[code]);
	    return p - output;
	}

	if (cfg.funky_type == FUNKY_SCO &&     /* SCO function keys */
	    code >= 11 && code <= 34) {
	    char codes[] = "MNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz@[\\]^_`{";
	    int index = 0;
	    switch (wParam) {
	      case VK_F1: index = 0; break;
	      case VK_F2: index = 1; break;
	      case VK_F3: index = 2; break;
	      case VK_F4: index = 3; break;
	      case VK_F5: index = 4; break;
	      case VK_F6: index = 5; break;
	      case VK_F7: index = 6; break;
	      case VK_F8: index = 7; break;
	      case VK_F9: index = 8; break;
	      case VK_F10: index = 9; break;
	      case VK_F11: index = 10; break;
	      case VK_F12: index = 11; break;
	    }
	    if (keystate[VK_SHIFT] & 0x80) index += 12;
	    if (keystate[VK_CONTROL] & 0x80) index += 24;
	    p += sprintf((char *) p, "\x1B[%c", codes[index]);
	    return p - output;
	}
	if (cfg.funky_type == FUNKY_SCO &&     /* SCO small keypad */
	    code >= 1 && code <= 6) {
	    char codes[] = "HL.FIG";
	    if (code == 3) {
		*p++ = '\x7F';
	    } else {
		p += sprintf((char *) p, "\x1B[%c", codes[code-1]);
	    }
	    return p - output;
	}
	if ((term->vt52_mode || cfg.funky_type == FUNKY_VT100P) && code >= 11 && code <= 24) {
	    int offt = 0;
	    if (code > 15)
		offt++;
	    if (code > 21)
		offt++;
	    if (term->vt52_mode)
		p += sprintf((char *) p, "\x1B%c", code + 'P' - 11 - offt);
	    else
		p +=
		    sprintf((char *) p, "\x1BO%c", code + 'P' - 11 - offt);
	    return p - output;
	}
	if (cfg.funky_type == FUNKY_LINUX && code >= 11 && code <= 15) {
	    p += sprintf((char *) p, "\x1B[[%c", code + 'A' - 11);
	    return p - output;
	}
	if (cfg.funky_type == FUNKY_XTERM && code >= 11 && code <= 14) {
	    if (term->vt52_mode)
		p += sprintf((char *) p, "\x1B%c", code + 'P' - 11);
	    else
		p += sprintf((char *) p, "\x1BO%c", code + 'P' - 11);
	    return p - output;
	}
	if (cfg.rxvt_homeend && (code == 1 || code == 4)) {
	    p += sprintf((char *) p, code == 1 ? "\x1B[H" : "\x1BOw");
	    return p - output;
	}
	if (code) {
	    p += sprintf((char *) p, "\x1B[%d~", code);
	    return p - output;
	}

	/*
	 * Now the remaining keys (arrows and Keypad 5. Keypad 5 for
	 * some reason seems to send VK_CLEAR to Windows...).
	 */
	{
	    char xkey = 0;
	    switch (wParam) {
	      case VK_UP:
		xkey = 'A';
		break;
	      case VK_DOWN:
		xkey = 'B';
		break;
	      case VK_RIGHT:
		xkey = 'C';
		break;
	      case VK_LEFT:
		xkey = 'D';
		break;
	      case VK_CLEAR:
		xkey = 'G';
		break;
	    }
	    if (xkey) {
		if (term->vt52_mode)
		    p += sprintf((char *) p, "\x1B%c", xkey);
		else {
		    int app_flg = (term->app_cursor_keys && !cfg.no_applic_c);
#if 0
		    /*
		     * RDB: VT100 & VT102 manuals both state the
		     * app cursor keys only work if the app keypad
		     * is on.
		     * 
		     * SGT: That may well be true, but xterm
		     * disagrees and so does at least one
		     * application, so I've #if'ed this out and the
		     * behaviour is back to PuTTY's original: app
		     * cursor and app keypad are independently
		     * switchable modes. If anyone complains about
		     * _this_ I'll have to put in a configurable
		     * option.
		     */
		    if (!term->app_keypad_keys)
			app_flg = 0;
#endif
		    /* Useful mapping of Ctrl-arrows */
		    if (shift_state == 2)
			app_flg = !app_flg;

		    if (app_flg)
			p += sprintf((char *) p, "\x1BO%c", xkey);
		    else
			p += sprintf((char *) p, "\x1B[%c", xkey);
		}
		return p - output;
	    }
	}

	/*
	 * Finally, deal with Return ourselves. (Win95 seems to
	 * foul it up when Alt is pressed, for some reason.)
	 */
	if (wParam == VK_RETURN) {     /* Return */
	    *p++ = 0x0D;
	    *p++ = 0;
	    return -2;
	}

	if (left_alt && wParam >= VK_NUMPAD0 && wParam <= VK_NUMPAD9)
	    alt_sum = alt_sum * 10 + wParam - VK_NUMPAD0;
	else
	    alt_sum = 0;
    }

    /* Okay we've done everything interesting; let windows deal with 
     * the boring stuff */
    {
	BOOL capsOn=0;

	/* helg: clear CAPS LOCK state if caps lock switches to cyrillic */
	if(cfg.xlat_capslockcyr && keystate[VK_CAPITAL] != 0) {
	    capsOn= !left_alt;
	    keystate[VK_CAPITAL] = 0;
	}

	/* XXX how do we know what the max size of the keys array should
	 * be is? There's indication on MS' website of an Inquire/InquireEx
	 * functioning returning a KBINFO structure which tells us. */
	if (osVersion.dwPlatformId == VER_PLATFORM_WIN32_NT) {
	    /* XXX 'keys' parameter is declared in MSDN documentation as
	     * 'LPWORD lpChar'.
	     * The experience of a French user indicates that on
	     * Win98, WORD[] should be passed in, but on Win2K, it should
	     * be BYTE[]. German WinXP and my Win2K with "US International"
	     * driver corroborate this.
	     * Experimentally I've conditionalised the behaviour on the
	     * Win9x/NT split, but I suspect it's worse than that.
	     * See wishlist item `win-dead-keys' for more horrible detail
	     * and speculations. */
	    BYTE keybs[3];
	    int i;
	    r = ToAsciiEx(wParam, scan, keystate, (LPWORD)keybs, 0, kbd_layout);
	    for (i=0; i<3; i++) keys[i] = keybs[i];
	} else {
	    r = ToAsciiEx(wParam, scan, keystate, keys, 0, kbd_layout);
	}
#ifdef SHOW_TOASCII_RESULT
	if (r == 1 && !key_down) {
	    if (alt_sum) {
		if (in_utf(term) || ucsdata.dbcs_screenfont)
		    debug((", (U+%04x)", alt_sum));
		else
		    debug((", LCH(%d)", alt_sum));
	    } else {
		debug((", ACH(%d)", keys[0]));
	    }
	} else if (r > 0) {
	    int r1;
	    debug((", ASC("));
	    for (r1 = 0; r1 < r; r1++) {
		debug(("%s%d", r1 ? "," : "", keys[r1]));
	    }
	    debug((")"));
	}
#endif
	if (r > 0) {
	    WCHAR keybuf;

	    /*
	     * Interrupt an ongoing paste. I'm not sure this is
	     * sensible, but for the moment it's preferable to
	     * having to faff about buffering things.
	     */
	    term_nopaste(term);

	    p = output;
	    for (i = 0; i < r; i++) {
		unsigned char ch = (unsigned char) keys[i];

		if (compose_state == 2 && (ch & 0x80) == 0 && ch > ' ') {
		    compose_char = ch;
		    compose_state++;
		    continue;
		}
		if (compose_state == 3 && (ch & 0x80) == 0 && ch > ' ') {
		    int nc;
		    compose_state = 0;

		    if ((nc = check_compose(compose_char, ch)) == -1) {
			MessageBeep(MB_ICONHAND);
			return 0;
		    }
		    keybuf = nc;
		    term_seen_key_event(term);
		    if (ldisc)
			luni_send(ldisc, &keybuf, 1, 1);
		    continue;
		}

		compose_state = 0;

		if (!key_down) {
		    if (alt_sum) {
			if (in_utf(term) || ucsdata.dbcs_screenfont) {
			    keybuf = alt_sum;
			    term_seen_key_event(term);
			    if (ldisc)
				luni_send(ldisc, &keybuf, 1, 1);
			} else {
			    ch = (char) alt_sum;
			    /*
			     * We need not bother about stdin
			     * backlogs here, because in GUI PuTTY
			     * we can't do anything about it
			     * anyway; there's no means of asking
			     * Windows to hold off on KEYDOWN
			     * messages. We _have_ to buffer
			     * everything we're sent.
			     */
			    term_seen_key_event(term);
			    if (ldisc)
				ldisc_send(ldisc, &ch, 1, 1);
			}
			alt_sum = 0;
		    } else {
			term_seen_key_event(term);
			if (ldisc)
			    lpage_send(ldisc, kbd_codepage, &ch, 1, 1);
		    }
		} else {
		    if(capsOn && ch < 0x80) {
			WCHAR cbuf[2];
			cbuf[0] = 27;
			cbuf[1] = xlat_uskbd2cyrllic(ch);
			term_seen_key_event(term);
			if (ldisc)
			    luni_send(ldisc, cbuf+!left_alt, 1+!!left_alt, 1);
		    } else {
			char cbuf[2];
			cbuf[0] = '\033';
			cbuf[1] = ch;
			term_seen_key_event(term);
			if (ldisc)
			    lpage_send(ldisc, kbd_codepage,
				       cbuf+!left_alt, 1+!!left_alt, 1);
		    }
		}
		show_mouseptr(0);
	    }

	    /* This is so the ALT-Numpad and dead keys work correctly. */
	    keys[0] = 0;

	    return p - output;
	}
	/* If we're definitly not building up an ALT-54321 then clear it */
	if (!left_alt)
	    keys[0] = 0;
	/* If we will be using alt_sum fix the 256s */
	else if (keys[0] && (in_utf(term) || ucsdata.dbcs_screenfont))
	    keys[0] = 10;
    }

    /*
     * ALT alone may or may not want to bring up the System menu.
     * If it's not meant to, we return 0 on presses or releases of
     * ALT, to show that we've swallowed the keystroke. Otherwise
     * we return -1, which means Windows will give the keystroke
     * its default handling (i.e. bring up the System menu).
     */
    if (wParam == VK_MENU && !cfg.alt_only)
	return 0;

    return -1;
}

void request_paste(void *frontend)
{
    /*
     * In Windows, pasting is synchronous: we can read the
     * clipboard with no difficulty, so request_paste() can just go
     * ahead and paste.
     */
    term_do_paste(term);
}

void set_title(void *frontend, char *title)
{
    sfree(window_name);
    window_name = snewn(1 + strlen(title), char);
    strcpy(window_name, title);
    if (cfg.win_name_always || !IsIconic(hwnd))
	SetWindowText(hwnd, title);
}

void set_icon(void *frontend, char *title)
{
    sfree(icon_name);
    icon_name = snewn(1 + strlen(title), char);
    strcpy(icon_name, title);
    if (!cfg.win_name_always && IsIconic(hwnd))
	SetWindowText(hwnd, title);
}

void set_sbar(void *frontend, int total, int start, int page)
{
    SCROLLINFO si;

    if (is_full_screen() ? !cfg.scrollbar_in_fullscreen : !cfg.scrollbar)
	return;

    si.cbSize = sizeof(si);
    si.fMask = SIF_ALL | SIF_DISABLENOSCROLL;
    si.nMin = 0;
    si.nMax = total - 1;
    si.nPage = page;
    si.nPos = start;
    if (hwnd)
	SetScrollInfo(hwnd, SB_VERT, &si, TRUE);
}

Context get_ctx(void *frontend)
{
    HDC hdc;
    if (hwnd) {
	hdc = GetDC(hwnd);
	if (hdc && pal)
	    SelectPalette(hdc, pal, FALSE);
	return hdc;
    } else
	return NULL;
}

void free_ctx(Context ctx)
{
    SelectPalette(ctx, GetStockObject(DEFAULT_PALETTE), FALSE);
    ReleaseDC(hwnd, ctx);
}

static void real_palette_set(int n, int r, int g, int b)
{
    if (pal) {
	logpal->palPalEntry[n].peRed = r;
	logpal->palPalEntry[n].peGreen = g;
	logpal->palPalEntry[n].peBlue = b;
	logpal->palPalEntry[n].peFlags = PC_NOCOLLAPSE;
	colours[n] = PALETTERGB(r, g, b);
	SetPaletteEntries(pal, 0, NCOLOURS, logpal->palPalEntry);
    } else
	colours[n] = RGB(r, g, b);
}

void palette_set(void *frontend, int n, int r, int g, int b)
{
    static const int first[21] = {
	0, 2, 4, 6, 8, 10, 12, 14,
	1, 3, 5, 7, 9, 11, 13, 15,
	16, 17, 18, 20, 22
    };
    real_palette_set(first[n], r, g, b);
    if (first[n] >= 18)
	real_palette_set(first[n] + 1, r, g, b);
    if (pal) {
	HDC hdc = get_ctx(frontend);
	UnrealizeObject(pal);
	RealizePalette(hdc);
	free_ctx(hdc);
    }
}

void palette_reset(void *frontend)
{
    int i;

    for (i = 0; i < NCOLOURS; i++) {
	if (pal) {
	    logpal->palPalEntry[i].peRed = defpal[i].rgbtRed;
	    logpal->palPalEntry[i].peGreen = defpal[i].rgbtGreen;
	    logpal->palPalEntry[i].peBlue = defpal[i].rgbtBlue;
	    logpal->palPalEntry[i].peFlags = 0;
	    colours[i] = PALETTERGB(defpal[i].rgbtRed,
				    defpal[i].rgbtGreen,
				    defpal[i].rgbtBlue);
	} else
	    colours[i] = RGB(defpal[i].rgbtRed,
			     defpal[i].rgbtGreen, defpal[i].rgbtBlue);
    }

    if (pal) {
	HDC hdc;
	SetPaletteEntries(pal, 0, NCOLOURS, logpal->palPalEntry);
	hdc = get_ctx(frontend);
	RealizePalette(hdc);
	free_ctx(hdc);
    }
}

void write_aclip(void *frontend, char *data, int len, int must_deselect)
{
    HGLOBAL clipdata;
    void *lock;

    clipdata = GlobalAlloc(GMEM_DDESHARE | GMEM_MOVEABLE, len + 1);
    if (!clipdata)
	return;
    lock = GlobalLock(clipdata);
    if (!lock)
	return;
    memcpy(lock, data, len);
    ((unsigned char *) lock)[len] = 0;
    GlobalUnlock(clipdata);

    if (!must_deselect)
	SendMessage(hwnd, WM_IGNORE_CLIP, TRUE, 0);

    if (OpenClipboard(hwnd)) {
	EmptyClipboard();
	SetClipboardData(CF_TEXT, clipdata);
	CloseClipboard();
    } else
	GlobalFree(clipdata);

    if (!must_deselect)
	SendMessage(hwnd, WM_IGNORE_CLIP, FALSE, 0);
}

/*
 * Note: unlike write_aclip() this will not append a nul.
 */
void write_clip(void *frontend, wchar_t * data, int len, int must_deselect)
{
    HGLOBAL clipdata, clipdata2, clipdata3;
    int len2;
    void *lock, *lock2, *lock3;

    len2 = WideCharToMultiByte(CP_ACP, 0, data, len, 0, 0, NULL, NULL);

    clipdata = GlobalAlloc(GMEM_DDESHARE | GMEM_MOVEABLE,
			   len * sizeof(wchar_t));
    clipdata2 = GlobalAlloc(GMEM_DDESHARE | GMEM_MOVEABLE, len2);

    if (!clipdata || !clipdata2) {
	if (clipdata)
	    GlobalFree(clipdata);
	if (clipdata2)
	    GlobalFree(clipdata2);
	return;
    }
    if (!(lock = GlobalLock(clipdata)))
	return;
    if (!(lock2 = GlobalLock(clipdata2)))
	return;

    memcpy(lock, data, len * sizeof(wchar_t));
    WideCharToMultiByte(CP_ACP, 0, data, len, lock2, len2, NULL, NULL);

    if (cfg.rtf_paste) {
	wchar_t unitab[256];
	char *rtf = NULL;
	unsigned char *tdata = (unsigned char *)lock2;
	wchar_t *udata = (wchar_t *)lock;
	int rtflen = 0, uindex = 0, tindex = 0;
	int rtfsize = 0;
	int multilen, blen, alen, totallen, i;
	char before[16], after[4];

	get_unitab(CP_ACP, unitab, 0);

	rtfsize = 100 + strlen(cfg.font.name);
	rtf = snewn(rtfsize, char);
	sprintf(rtf, "{\\rtf1\\ansi%d{\\fonttbl\\f0\\fmodern %s;}\\f0",
		GetACP(), cfg.font.name);
	rtflen = strlen(rtf);

	/*
	 * We want to construct a piece of RTF that specifies the
	 * same Unicode text. To do this we will read back in
	 * parallel from the Unicode data in `udata' and the
	 * non-Unicode data in `tdata'. For each character in
	 * `tdata' which becomes the right thing in `udata' when
	 * looked up in `unitab', we just copy straight over from
	 * tdata. For each one that doesn't, we must WCToMB it
	 * individually and produce a \u escape sequence.
	 * 
	 * It would probably be more robust to just bite the bullet
	 * and WCToMB each individual Unicode character one by one,
	 * then MBToWC each one back to see if it was an accurate
	 * translation; but that strikes me as a horrifying number
	 * of Windows API calls so I want to see if this faster way
	 * will work. If it screws up badly we can always revert to
	 * the simple and slow way.
	 */
	while (tindex < len2 && uindex < len &&
	       tdata[tindex] && udata[uindex]) {
	    if (tindex + 1 < len2 &&
		tdata[tindex] == '\r' &&
		tdata[tindex+1] == '\n') {
		tindex++;
		uindex++;
	    }
	    if (unitab[tdata[tindex]] == udata[uindex]) {
		multilen = 1;
		before[0] = '\0';
		after[0] = '\0';
		blen = alen = 0;
	    } else {
		multilen = WideCharToMultiByte(CP_ACP, 0, unitab+uindex, 1,
					       NULL, 0, NULL, NULL);
		if (multilen != 1) {
		    blen = sprintf(before, "{\\uc%d\\u%d", multilen,
				   udata[uindex]);
		    alen = 1; strcpy(after, "}");
		} else {
		    blen = sprintf(before, "\\u%d", udata[uindex]);
		    alen = 0; after[0] = '\0';
		}
	    }
	    assert(tindex + multilen <= len2);
	    totallen = blen + alen;
	    for (i = 0; i < multilen; i++) {
		if (tdata[tindex+i] == '\\' ||
		    tdata[tindex+i] == '{' ||
		    tdata[tindex+i] == '}')
		    totallen += 2;
		else if (tdata[tindex+i] == 0x0D || tdata[tindex+i] == 0x0A)
		    totallen += 6;     /* \par\r\n */
		else if (tdata[tindex+i] > 0x7E || tdata[tindex+i] < 0x20)
		    totallen += 4;
		else
		    totallen++;
	    }

	    if (rtfsize < rtflen + totallen + 3) {
		rtfsize = rtflen + totallen + 512;
		rtf = sresize(rtf, rtfsize, char);
	    }

	    strcpy(rtf + rtflen, before); rtflen += blen;
	    for (i = 0; i < multilen; i++) {
		if (tdata[tindex+i] == '\\' ||
		    tdata[tindex+i] == '{' ||
		    tdata[tindex+i] == '}') {
		    rtf[rtflen++] = '\\';
		    rtf[rtflen++] = tdata[tindex+i];
		} else if (tdata[tindex+i] == 0x0D || tdata[tindex+i] == 0x0A) {
		    rtflen += sprintf(rtf+rtflen, "\\par\r\n");
		} else if (tdata[tindex+i] > 0x7E || tdata[tindex+i] < 0x20) {
		    rtflen += sprintf(rtf+rtflen, "\\'%02x", tdata[tindex+i]);
		} else {
		    rtf[rtflen++] = tdata[tindex+i];
		}
	    }
	    strcpy(rtf + rtflen, after); rtflen += alen;

	    tindex += multilen;
	    uindex++;
	}

	strcpy(rtf + rtflen, "}");
	rtflen += 2;

	clipdata3 = GlobalAlloc(GMEM_DDESHARE | GMEM_MOVEABLE, rtflen);
	if (clipdata3 && (lock3 = GlobalLock(clipdata3)) != NULL) {
	    strcpy(lock3, rtf);
	    GlobalUnlock(clipdata3);
	}
	sfree(rtf);
    } else
	clipdata3 = NULL;

    GlobalUnlock(clipdata);
    GlobalUnlock(clipdata2);

    if (!must_deselect)
	SendMessage(hwnd, WM_IGNORE_CLIP, TRUE, 0);

    if (OpenClipboard(hwnd)) {
	EmptyClipboard();
	SetClipboardData(CF_UNICODETEXT, clipdata);
	SetClipboardData(CF_TEXT, clipdata2);
	if (clipdata3)
	    SetClipboardData(RegisterClipboardFormat(CF_RTF), clipdata3);
	CloseClipboard();
    } else {
	GlobalFree(clipdata);
	GlobalFree(clipdata2);
    }

    if (!must_deselect)
	SendMessage(hwnd, WM_IGNORE_CLIP, FALSE, 0);
}

void get_clip(void *frontend, wchar_t ** p, int *len)
{
    static HGLOBAL clipdata = NULL;
    static wchar_t *converted = 0;
    wchar_t *p2;

    if (converted) {
	sfree(converted);
	converted = 0;
    }
    if (!p) {
	if (clipdata)
	    GlobalUnlock(clipdata);
	clipdata = NULL;
	return;
    } else if (OpenClipboard(NULL)) {
	if ((clipdata = GetClipboardData(CF_UNICODETEXT))) {
	    CloseClipboard();
	    *p = GlobalLock(clipdata);
	    if (*p) {
		for (p2 = *p; *p2; p2++);
		*len = p2 - *p;
		return;
	    }
	} else if ( (clipdata = GetClipboardData(CF_TEXT)) ) {
	    char *s;
	    int i;
	    CloseClipboard();
	    s = GlobalLock(clipdata);
	    i = MultiByteToWideChar(CP_ACP, 0, s, strlen(s) + 1, 0, 0);
	    *p = converted = snewn(i, wchar_t);
	    MultiByteToWideChar(CP_ACP, 0, s, strlen(s) + 1, converted, i);
	    *len = i - 1;
	    return;
	} else
	    CloseClipboard();
    }

    *p = NULL;
    *len = 0;
}

#if 0
/*
 * Move `lines' lines from position `from' to position `to' in the
 * window.
 */
void optimised_move(void *frontend, int to, int from, int lines)
{
    RECT r;
    int min, max;

    min = (to < from ? to : from);
    max = to + from - min;

    r.left = offset_width;
    r.right = offset_width + term->cols * font_width;
    r.top = offset_height + min * font_height;
    r.bottom = offset_height + (max + lines) * font_height;
    ScrollWindow(hwnd, 0, (to - from) * font_height, &r, &r);
}
#endif

/*
 * Print a message box and perform a fatal exit.
 */
void fatalbox(char *fmt, ...)
{
    va_list ap;
    char *stuff, morestuff[100];

    va_start(ap, fmt);
    stuff = dupvprintf(fmt, ap);
    va_end(ap);
    sprintf(morestuff, "%.70s Fatal Error", appname);
    MessageBox(hwnd, stuff, morestuff, MB_ICONERROR | MB_OK);
    sfree(stuff);
    cleanup_exit(1);
}

/*
 * Print a modal (Really Bad) message box and perform a fatal exit.
 */
void modalfatalbox(char *fmt, ...)
{
    va_list ap;
    char *stuff, morestuff[100];

    va_start(ap, fmt);
    stuff = dupvprintf(fmt, ap);
    va_end(ap);
    sprintf(morestuff, "%.70s Fatal Error", appname);
    MessageBox(hwnd, stuff, morestuff,
	       MB_SYSTEMMODAL | MB_ICONERROR | MB_OK);
    sfree(stuff);
    cleanup_exit(1);
}

/*
 * Manage window caption / taskbar flashing, if enabled.
 * 0 = stop, 1 = maintain, 2 = start
 */
static void flash_window(int mode)
{
    static long last_flash = 0;
    static int flashing = 0;
    if ((mode == 0) || (cfg.beep_ind == B_IND_DISABLED)) {
	/* stop */
	if (flashing) {
	    FlashWindow(hwnd, FALSE);
	    flashing = 0;
	}

    } else if (mode == 2) {
	/* start */
	if (!flashing) {
	    last_flash = GetTickCount();
	    flashing = 1;
	    FlashWindow(hwnd, TRUE);
	}

    } else if ((mode == 1) && (cfg.beep_ind == B_IND_FLASH)) {
	/* maintain */
	if (flashing) {
	    long now = GetTickCount();
	    long fdiff = now - last_flash;
	    if (fdiff < 0 || fdiff > 450) {
		last_flash = now;
		FlashWindow(hwnd, TRUE);	/* toggle */
	    }
	}
    }
}

/*
 * Beep.
 */
void beep(void *frontend, int mode)
{
    if (mode == BELL_DEFAULT) {
	/*
	 * For MessageBeep style bells, we want to be careful of
	 * timing, because they don't have the nice property of
	 * PlaySound bells that each one cancels the previous
	 * active one. So we limit the rate to one per 50ms or so.
	 */
	static long lastbeep = 0;
	long beepdiff;

	beepdiff = GetTickCount() - lastbeep;
	if (beepdiff >= 0 && beepdiff < 50)
	    return;
	MessageBeep(MB_OK);
	/*
	 * The above MessageBeep call takes time, so we record the
	 * time _after_ it finishes rather than before it starts.
	 */
	lastbeep = GetTickCount();
    } else if (mode == BELL_WAVEFILE) {
	if (!PlaySound(cfg.bell_wavefile.path, NULL,
		       SND_ASYNC | SND_FILENAME)) {
	    char buf[sizeof(cfg.bell_wavefile.path) + 80];
	    char otherbuf[100];
	    sprintf(buf, "Unable to play sound file\n%s\n"
		    "Using default sound instead", cfg.bell_wavefile.path);
	    sprintf(otherbuf, "%.70s Sound Error", appname);
	    MessageBox(hwnd, buf, otherbuf,
		       MB_OK | MB_ICONEXCLAMATION);
	    cfg.beep = BELL_DEFAULT;
	}
    } else if (mode == BELL_PCSPEAKER) {
	static long lastbeep = 0;
	long beepdiff;

	beepdiff = GetTickCount() - lastbeep;
	if (beepdiff >= 0 && beepdiff < 50)
	    return;

	/*
	 * We must beep in different ways depending on whether this
	 * is a 95-series or NT-series OS.
	 */
	if(osVersion.dwPlatformId == VER_PLATFORM_WIN32_NT)
	    Beep(800, 100);
	else
	    MessageBeep(-1);
	lastbeep = GetTickCount();
    }
    /* Otherwise, either visual bell or disabled; do nothing here */
    if (!term->has_focus) {
	flash_window(2);	       /* start */
    }
}

/*
 * Minimise or restore the window in response to a server-side
 * request.
 */
void set_iconic(void *frontend, int iconic)
{
    if (IsIconic(hwnd)) {
	if (!iconic)
	    ShowWindow(hwnd, SW_RESTORE);
    } else {
	if (iconic)
	    ShowWindow(hwnd, SW_MINIMIZE);
    }
}

/*
 * Move the window in response to a server-side request.
 */
void move_window(void *frontend, int x, int y)
{
    if (cfg.resize_action == RESIZE_DISABLED || 
        cfg.resize_action == RESIZE_FONT ||
	IsZoomed(hwnd))
       return;

    SetWindowPos(hwnd, NULL, x, y, 0, 0, SWP_NOSIZE | SWP_NOZORDER);
}

/*
 * Move the window to the top or bottom of the z-order in response
 * to a server-side request.
 */
void set_zorder(void *frontend, int top)
{
    if (cfg.alwaysontop)
	return;			       /* ignore */
    SetWindowPos(hwnd, top ? HWND_TOP : HWND_BOTTOM, 0, 0, 0, 0,
		 SWP_NOMOVE | SWP_NOSIZE);
}

/*
 * Refresh the window in response to a server-side request.
 */
void refresh_window(void *frontend)
{
    InvalidateRect(hwnd, NULL, TRUE);
}

/*
 * Maximise or restore the window in response to a server-side
 * request.
 */
void set_zoomed(void *frontend, int zoomed)
{
    if (IsZoomed(hwnd)) {
        if (!zoomed)
	    ShowWindow(hwnd, SW_RESTORE);
    } else {
	if (zoomed)
	    ShowWindow(hwnd, SW_MAXIMIZE);
    }
}

/*
 * Report whether the window is iconic, for terminal reports.
 */
int is_iconic(void *frontend)
{
    return IsIconic(hwnd);
}

/*
 * Report the window's position, for terminal reports.
 */
void get_window_pos(void *frontend, int *x, int *y)
{
    RECT r;
    GetWindowRect(hwnd, &r);
    *x = r.left;
    *y = r.top;
}

/*
 * Report the window's pixel size, for terminal reports.
 */
void get_window_pixels(void *frontend, int *x, int *y)
{
    RECT r;
    GetWindowRect(hwnd, &r);
    *x = r.right - r.left;
    *y = r.bottom - r.top;
}

/*
 * Return the window or icon title.
 */
char *get_window_title(void *frontend, int icon)
{
    return icon ? icon_name : window_name;
}

/*
 * See if we're in full-screen mode.
 */
static int is_full_screen()
{
    if (!IsZoomed(hwnd))
	return FALSE;
    if (GetWindowLong(hwnd, GWL_STYLE) & WS_CAPTION)
	return FALSE;
    return TRUE;
}

/* Get the rect/size of a full screen window using the nearest available
 * monitor in multimon systems; default to something sensible if only
 * one monitor is present. */
static int get_fullscreen_rect(RECT * ss)
{
#if defined(MONITOR_DEFAULTTONEAREST) && !defined(NO_MULTIMON)
	HMONITOR mon;
	MONITORINFO mi;
	mon = MonitorFromWindow(hwnd, MONITOR_DEFAULTTONEAREST);
	mi.cbSize = sizeof(mi);
	GetMonitorInfo(mon, &mi);

	/* structure copy */
	*ss = mi.rcMonitor;
	return TRUE;
#else
/* could also use code like this:
	ss->left = ss->top = 0;
	ss->right = GetSystemMetrics(SM_CXSCREEN);
	ss->bottom = GetSystemMetrics(SM_CYSCREEN);
*/ 
	return GetClientRect(GetDesktopWindow(), ss);
#endif
}


/*
 * Go full-screen. This should only be called when we are already
 * maximised.
 */
static void make_full_screen()
{
    DWORD style;
	RECT ss;

    assert(IsZoomed(hwnd));

	if (is_full_screen())
		return;
	
    /* Remove the window furniture. */
    style = GetWindowLong(hwnd, GWL_STYLE);
    style &= ~(WS_CAPTION | WS_BORDER | WS_THICKFRAME);
    if (cfg.scrollbar_in_fullscreen)
	style |= WS_VSCROLL;
    else
	style &= ~WS_VSCROLL;
    SetWindowLong(hwnd, GWL_STYLE, style);

    /* Resize ourselves to exactly cover the nearest monitor. */
	get_fullscreen_rect(&ss);
    SetWindowPos(hwnd, HWND_TOP, ss.left, ss.top,
			ss.right - ss.left,
			ss.bottom - ss.top,
			SWP_FRAMECHANGED);

    /* Tick the menu item in the System menu. */
    CheckMenuItem(GetSystemMenu(hwnd, FALSE), IDM_FULLSCREEN,
		  MF_CHECKED);
}

/*
 * Clear the full-screen attributes.
 */
static void clear_full_screen()
{
    DWORD oldstyle, style;

    /* Reinstate the window furniture. */
    style = oldstyle = GetWindowLong(hwnd, GWL_STYLE);
    style |= WS_CAPTION | WS_BORDER;
    if (cfg.resize_action == RESIZE_DISABLED)
        style &= ~WS_THICKFRAME;
    else
        style |= WS_THICKFRAME;
    if (cfg.scrollbar)
	style |= WS_VSCROLL;
    else
	style &= ~WS_VSCROLL;
    if (style != oldstyle) {
	SetWindowLong(hwnd, GWL_STYLE, style);
	SetWindowPos(hwnd, NULL, 0, 0, 0, 0,
		     SWP_NOMOVE | SWP_NOSIZE | SWP_NOZORDER |
		     SWP_FRAMECHANGED);
    }

    /* Untick the menu item in the System menu. */
    CheckMenuItem(GetSystemMenu(hwnd, FALSE), IDM_FULLSCREEN,
		  MF_UNCHECKED);
}

/*
 * Toggle full-screen mode.
 */
static void flip_full_screen()
{
    if (is_full_screen()) {
	ShowWindow(hwnd, SW_RESTORE);
    } else if (IsZoomed(hwnd)) {
	make_full_screen();
    } else {
	SendMessage(hwnd, WM_FULLSCR_ON_MAX, 0, 0);
	ShowWindow(hwnd, SW_MAXIMIZE);
    }
}

void frontend_keypress(void *handle)
{
    /*
     * Keypress termination in non-Close-On-Exit mode is not
     * currently supported in PuTTY proper, because the window
     * always has a perfectly good Close button anyway. So we do
     * nothing here.
     */
    return;
}

int from_backend(void *frontend, int is_stderr, const char *data, int len)
{
    return term_data(term, is_stderr, data, len);
}

void agent_schedule_callback(void (*callback)(void *, void *, int),
			     void *callback_ctx, void *data, int len)
{
    struct agent_callback *c = snew(struct agent_callback);
    c->callback = callback;
    c->callback_ctx = callback_ctx;
    c->data = data;
    c->len = len;
    PostMessage(hwnd, WM_AGENT_CALLBACK, 0, (LPARAM)c);
}